DOWNLOAD Sharp LL-T1511A (serv.man25) Service Manual ↓ Size: 1.23 MB | Pages: 26 in PDF or view online for FREE

Installing monitor set-up information into Windows95.
This explanation assumes that the floppy disk drive
is "A drive".

1. Place the Monitor Settings Adjustment Disk

(provided) into the computer's A drive.

2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced Properties], and

[Monitor], then [Change].

5. Click on [Have Disk], confirm that [Copy manu-

facturer's files from:] is [A:] then click [OK].

6. Confirm that the monitor details are selected, and

click [OK].

7. Check that the monitor details are displayed, then

click [Apply].

8. Click [OK], and close the window.

9. Remove the Monitor Settings Adjustment

Disk from the A drive.

Installing monitor set-up information into Win-
dows98.
If the "Add New Hardware Wizard" has appeared:
(This explanation assumes that the floppy disk drive
is "A drive")

1. Place the Monitor Settings Adjustment Disk

(provided) into the computer's A drive.

2. Click [Next].

3. Check [Display a list of all the drivers in a specific

location, so you can select the driver you want.],
then click [Next].

4. When [Models] is displayed, click on [Have Disk],

confirm that [Copy manufacturer's files from:] is
[A:], and click [OK].

5. Confirm that the monitor details are selected,

then click [Next], [Next], and [Finish]. If the "Add
New Hardware Wizard" appears, repeat the
installation commands beginning from 2 above.

6. Remove the Monitor Settings Adjustment Disk

from the A drive.

If the "Add New Hardware Wizard" has not ap-
peared:
(This explanation assumes that the floppy disk drive
is "A drive")

1. Place the Monitor Settings Adjustment Disk in the

computer's A drive.

2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced] and [Monitor].

5. In [Options], check [Automatically detect Plug &

Play monitors] and click on [Change].

6. Click [Next].

7. Click on [Display a list of all the drivers in a

specific location, so you can select the driver you
want.], then click [Next].

8. When [Models] is displayed, click on [Have Disk],

confirm that [Copy manufacturer's files from:] is
[A:], and click [OK].

9. Confirm that the monitor details are selected,

then click [Next], [Next], and [Finish].

10.Check that the monitor details are displayed, then

click [Apply].

11.Click [OK], and close the window.

12.Remove the Monitor Settings Adjustment Disk

from the A drive.

LL-T1511-01A_gb.p65

2/14/01, 9:00 AM

13

Installing monitor set-up information into Win-
dows2000.
This explanation assumes that the floppy disk drive
is "A drive".

1. Place the Monitor Settings Adjustment Disk

(provided) into the computer's A drive.

2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced] and [Monitor].

5. Click on [Properties], [Driver] and [Update

Driver].

6. When [Upgrade Device Driver Wizard] appears,

click [Next].

7. Check [Display a list of the known drivers for this

device so that I can choose a specific driver] and
click [Next].

8. When [Models] is displayed, click on [Have Disk],

confirm that [Copy manufacturer's files from:] is
[A:], and click [OK].

9. Select the monitor from the list displayed and

click [Next].

10.Click [Next], confirm that the monitor's name

appears on the screen, and click [Finish]. If
[Digital Signature Not Found] appears, click [Yes].

11.Click on [Close].

12.Click [OK], and close the window.

13.Remove the Monitor Settings Adjustment Disk

from the A drive.

Installing monitor set-up information into
WindowsMe.
If the "Add New Hardware Wizard" has appeared:
(This explanation assumes that the floppy disk drive
is "A drive")

1. Place the Monitor Settings Adjustment Disk

(provided) into the computer's A drive.

2. Check [Specify the location of the driver [Ad-

vanced]] and click [Next].

3. Check [Display a list of all the drivers in a specific

location, so you can select the driver you want.],
then click [Next].

4. When [Models] is displayed, click on [Have Disk],

confirm that [Copy manufacturer's files from:] is
[A:], and click [OK].

5. Select the monitor details from the list, then click

[Next], [Next], and [Finish]. If the "Add New
Hardware Wizard" appears, repeat the installa-
tion commands beginning from 2 above.

6. Remove the Monitor Settings Adjustment Disk

from the A drive.

If the "Add New Hardware Wizard" has not ap-
peared:
(This explanation assumes that the floppy disk drive
is "A drive")

1. Place the Monitor Settings Adjustment Disk in the

computer's A drive.

2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced] and [Monitor].

5. In [Options], check [Automatically detect Plug &

Play monitors] and click on [Change].

6. Check [Specify the location of the driver [Ad-

vanced]] and click [Next].

7. Check [Display a list of all the drivers in a specific

location, so you can select the driver you want.]
and click [Next].

8. When [Models] is displayed, click on [Have Disk],

confirm that [Copy manufacturer's files from:] is
[A:], and click [OK].

9. Select the monitor details, then click [Next],

[Next], and [Finish].

10.Check that the monitor details are displayed, then

click [Apply].

11.Click [OK], and close the window.

12.Remove the Monitor Settings Adjustment Disk

from the A drive.

LL-T1511-01A_gb.p65

2/14/01, 9:00 AM

14

1. Turn the computer off.

2. Press the monitor's power button.

The Power LED will disappear.

3. Turn the monitor off at the main switch.

If your computer or computer's OS is USB compat-
ible, the monitor can be connected to a USB device.

1. Plug one end of the USB cable (provided) into

the monitor's USB upstream port.

2. Connect the other end of the USB cable into the

computer or the USB downstream port.

3. Plug the USB device into the monitor’s USB

downstream port.

USB cable
(provided)

USB upstream port

To the computer or another USB
hub’s downstream port

USB down-
stream port

Notes:
•

Please use a USB cable that has a length of less
than 3 metres.

•

Before connecting, ensure that the shape of the
USB cable connector is correct.

•

For information regarding the USB function (such
as set-up) please refer to the operation manual of
the computer to be connected.

•

Some computers, OS and other devices may not
be able to be activated. To ascertain a certain
device's USB compatibility, please contact the
manufacturer of the device.

Standard:

Based on USB standard
(Rev. 1.1), bus-powered hub

Downstream port
power supply:

100 mA per port maximum

LL-T1511-01A_gb.p65

2/14/01, 9:00 AM

15

If necessary, the screen can be adjusted as follows.
Automatic screen adjustment (right column)
The clock, phase, H-POS (horizontal positioning)
and V-POS (vertical positioning) functions can be
adjusted automatically.
Adjustment of backlight (p.17)
Brightness of backlight can be adjusted.
Manual adjustment (p. 18)
Fine adjustments can be made using the On Screen
Display (OSD) Menu.

Note:
•

All adjustments will be saved even after turning
the power off.

All adjustment values can be returned to their
original ex-factory values in one command.
1. Press the power button to turn off the monitor

power.

2. Press the MENU button and the SELECT button

simultaneously, and while doing this press the
power button (i.e. turn the power on). When
[ALL RESET] appears on the screen, the reset is
complete.

Notes:
•

While ALL RESET is displayed, the control
buttons do not function.

•

It is not possible to reset values when the
adjustment lock is in place. Remove the
adjustment lock before attempting to operate
control buttons.

By disabling the control buttons (i.e. setting the lock)
any attempted changes to adjusted values will be
voided.
1. Press the power button to turn off the monitor

power.

2. While pressing the MENU button, press the

power button (i.e. turn the power on).
When the menu is unlocked:
[ADJUSTMENT LOCKED] will appear on the
screen, and the lock will be set.
When the menu is locked:
[ADJUSTMENT UNLOCKED] will appear on the
screen, and the lock will be removed.

Note:
•

When the lock is in place, all buttons other than
the power button are disabled.

Options in MENU 1 (ADJUSTMENT) can be ad-
justed automatically (Clock, Phase, H-POS, V-POS).

Note:
•

When setting up this monitor for the first time or
after having changed an aspect of the current
system, perform an automatic screen adjustment
before use.

1. First display an image that makes the entire

screen very bright. If you are using Windows, you
can use the Adjustment Pattern on the
accompanying Monitor Settings Adjustment Disk
(p. 17).

2. Press the MENU button.

The ADJUSTMENT Menu will be displayed.

[

]

A

A

A

A

A

C

C

D

E

H

V

H

H

J

K

L

M

M

N

N

L

O

O

O

P

P

S

S

S

T

T

T

U

U

U

8

V

1

2

4

 

6

4

H

6

7

0

8

0

5

6 0

 

1

 

0

0

5

z

0

x

-

O

P

S

-

:

k

: 4

H z

E

3. Press the   button.

The screen will become dark and [ADJUSTING]
will be displayed. After a few seconds the
ADJUSTMENT Menu will return. (The automatic
adjustment is now complete.)

4. Press the MENU button four times to make the

Adjustment (OSD) Menu disappear.

Notes:
1. In most cases automatic adjustment is sufficient.
2. If necessary due to any of the following, manual

adjustments (p. 18) can be performed after the
automatic adjustment.

•

When further fine adjustment is needed.

•

When [OUT OF ADJUST] is displayed.
(When the screen displays an entirely dark
image, the automatic screen adjustment may
be disabled. When making an automatic
adjustment, be sure to either use the
Adjustment Pattern or try displaying an image
that makes the entire screen very bright.)

3. For LL-T1511A, pushing the BRIGHT button can

also make the Adjustment (OSD) Menu
disappear.

LL-T1511-01A_gb.p65

2/14/01, 9:00 AM

16