Sharp R-22 (serv.man5) User Manual / Operation Manual ▷ View online
4
A31845,SUK R22AT/24AT O/M
MPORTANT SAFETY INSTRUCTIONS
I
IMPORTANT: PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
Oven Use:
• The oven is for food preparation only.
• The oven is for food preparation only.
Never operate when empty.
• Do not leave or store anything inside the oven when
not in use.
• Never attempt to use the oven with the door open.
It is important not to tamper with the door safety
latches. This may result in exposure to microwave
energy.
latches. This may result in exposure to microwave
energy.
• Never operate the oven with any object caught in
the door sealing surfaces, this again may cause
microwave leakage.
microwave leakage.
• Do not insert fingers or objects in the holes of the
door latches or air vent openings as this may
damage the oven and cause an electric shock.
damage the oven and cause an electric shock.
• If water or food drops inside the air vent openings
switch off the oven immediately, unplug it and call a
Service Technician appointed by SHARP.
Service Technician appointed by SHARP.
• Never attempt to move the oven while it is operating.
• Do not use the oven near a steamer or a fryer.
• Always wipe up spills on the ceramic floor and splashes
on the walls after cooking. If you leave grease on the
ceramic floor and walls it may overheat, smoke or even
catch fire when next using your oven.
ceramic floor and walls it may overheat, smoke or even
catch fire when next using your oven.
• After each use wipe the splash cover on the ceiling
of the oven with a soft damp cloth to remove any
splashes. If you leave grease on the splash cover it
may overheat, smoke or even catch fire when next
using your oven.
splashes. If you leave grease on the splash cover it
may overheat, smoke or even catch fire when next
using your oven.
NSTALLATION
I
1
Remove all packing materials. Remove the protec-
tive film (blue film) from the outer case cabinet (if cov-
ered). Do not remove the plastic film from the inside
of the oven window as this protects it from dirt.
tive film (blue film) from the outer case cabinet (if cov-
ered). Do not remove the plastic film from the inside
of the oven window as this protects it from dirt.
2
Place oven on a secure, level surface, strong enough
to take the oven weight, plus the heaviest item likely
to be cooked in the oven.
to take the oven weight, plus the heaviest item likely
to be cooked in the oven.
3
Ensure there is a minimum free space above the oven
of 25 cm.
of 25 cm.
4
Do not place the oven where heat, moisture or high
humidity are generated, (for example, near or above
a conventional oven) or near combustible materials
(for example, curtains). Do not block or obstruct air
vent openings, as obstructions may ignite due to the
emission of hot air.
humidity are generated, (for example, near or above
a conventional oven) or near combustible materials
(for example, curtains). Do not block or obstruct air
vent openings, as obstructions may ignite due to the
emission of hot air.
5
Make sure the power supply cord is undamaged (See
Installation next page) and that it does not run under
the oven or over any hot or sharp surfaces.
Installation next page) and that it does not run under
the oven or over any hot or sharp surfaces.
!
WARNING:
!
WARNING:
Only allow children to use the oven without supervision
when adequate instruction has been given so that
the child is able to use the oven in a safe way and
understands the hazards of improper use.
when adequate instruction has been given so that
the child is able to use the oven in a safe way and
understands the hazards of improper use.
Pacemaker: If you have a heart pacemaker,
consult your doctor or the pacemaker manufacturer
prior to oven use.
consult your doctor or the pacemaker manufacturer
prior to oven use.
Fire: If food overheats, starts to smoke or burn:
Keep the oven door closed; turn the oven off;
switch off the power at the socket and disconnect
the plug from the socket. Failure to follow this pro-
cedure may result in fire and oven damage.
Keep the oven door closed; turn the oven off;
switch off the power at the socket and disconnect
the plug from the socket. Failure to follow this pro-
cedure may result in fire and oven damage.
Liquids: Take care when microwaving liquids and
beverages. To prevent delayed eruptive boiling
of liquid and possible scalding: Stir liquid prior
to and during heating/reheating, let liquid stand
in the oven at the end of cooking.
beverages. To prevent delayed eruptive boiling
of liquid and possible scalding: Stir liquid prior
to and during heating/reheating, let liquid stand
in the oven at the end of cooking.
Inspect the Oven:
Check the oven carefully for damage before and
regularly after installation.
Check the oven carefully for damage before and
regularly after installation.
• Make sure the door closes properly, that it is not
misaligned or warped.
• Check the hinges and door safety latches are
not broken or loose.
• Ensure the door seal and sealing surfaces are
not damaged.
• Inspect the oven interior and door for dents.
Caution Sheet:
Always keep the caution sheet (Special Instruc-
tions and Warnings) close to the oven for your
reference.
Always keep the caution sheet (Special Instruc-
tions and Warnings) close to the oven for your
reference.
Important:
If any damage is apparent, do not operate the
oven in any way. Contact your dealer or an au-
thorised Service Technician appointed by
SHARP.
If any damage is apparent, do not operate the
oven in any way. Contact your dealer or an au-
thorised Service Technician appointed by
SHARP.
Untitled-4
04.1.9, 8:17 PM
4
A31845,SUK R22AT/24AT O/M
5
Figure A
Screw (d)
Screw (c)
Mounting plate B
Rear cabinet
Oven A
Screw (b)
Mounting plate A
Screw (a)
Oven B
Rear cabinet
Screw (a)
6
The socket must be readily accessible so that it can
be easily unplugged in an emergency.
be easily unplugged in an emergency.
7
Do not use the oven outdoors.
8
Two ovens can be installed together by placing one
on top of another. Follow these instructions.
on top of another. Follow these instructions.
8-1) Place the oven A and position the oven B on top of
the oven A as shown in the figure A.
8-2) Remove the single screw (a) holding the mounting
plate A to the rear cabinet of the oven A. And re-
move the mounting plate A.
move the mounting plate A.
8-3) Remove the single screw (b) from the rear cabinet
of the oven B, as shown in the figure A.
8-4) Reinstall the mounting plate A to the rear cabinet of
the oven B with the single screw (b) removed, as
shown in the figure A.
shown in the figure A.
8-5) Hold the mounting plate A to the rear cabinet of the
oven A with the single screw (a), as shown in the
figure A.
figure A.
8-6) Remove the screw (a) holding the mounting plate B
to the rear cabinet of the oven B. And remove the
mounting plate B from the oven B. See the figure A.
mounting plate B from the oven B. See the figure A.
8-7) Install the screw (a) to its position again.
8-8) Remove the screw (c) from the oven A.
8-9) Remove the screw (d) from the oven B.
8-10) Turn the removed mounting plate B over and then
8-8) Remove the screw (c) from the oven A.
8-9) Remove the screw (d) from the oven B.
8-10) Turn the removed mounting plate B over and then
using the removed screw (c) and (d), attach the
mounting plate B, as shown in the figure A.
mounting plate B, as shown in the figure A.
WARNING:
In situations where two ovens are installed together by
placing one on top of another,
In situations where two ovens are installed together by
placing one on top of another,
1) Use the two mounting plates for fixing the two
ovens.
2) Make sure that the power supply cord is not caught
between the two ovens.
3) Do not install more than one oven on top of
another.
4) Do not lose the removed screws.
It is hazardous for anyone other than a Service Tech-
nician, approved by SHARP to carry out any service
or repair operation which involves the removal of a
cover which gives protection against exposure to mi-
crowave energy.
nician, approved by SHARP to carry out any service
or repair operation which involves the removal of a
cover which gives protection against exposure to mi-
crowave energy.
BUILDING-IN-KIT
This oven is not designed to be built into a kitchen unit.
This oven is not designed to be built into a kitchen unit.
IMPORTANT! ELECTRICAL CONNECTION
• Do not allow water to come into contact with the
power supply cord or plug.
• Insert the plug properly into the socket as the plug
may otherwise overheat and catch fire.
• Do not connect other appliances to the same socket
using an adaptor plug as it may cause the wiring to
overheat and catch fire.
overheat and catch fire.
• If the plug or socket is loose or the power supply
cord is damaged, do not operate the oven, it must be
replaced by the special power cord. Contact your
dealer or a Service Technician appointed by SHARP.
A defective plug, power supply cord or socket may
overheat and catch fire during operation or cause an
electrical shock.
replaced by the special power cord. Contact your
dealer or a Service Technician appointed by SHARP.
A defective plug, power supply cord or socket may
overheat and catch fire during operation or cause an
electrical shock.
• When removing the plug from the socket always grip
the plug, never the mains lead as this may damage
the power supply cord and the connections inside
the plug.
the power supply cord and the connections inside
the plug.
• The product is fitted with a non-rewireable (moulded)
plug. Should it not be suitable for the socket outlet in
your kitchen, remove the plug and fit an appropriate
type, observing the wiring code given in "To replace
the mains plug" on page 30.
your kitchen, remove the plug and fit an appropriate
type, observing the wiring code given in "To replace
the mains plug" on page 30.
The fuse from a cut-off plug should be removed and the
plug disposed of in safe manner. Under no circumstances
should the cut-off plug be inserted into a socket outlet as
serious electrical shock may occur. The plug must not be
used without the fuse cover fitted.
plug disposed of in safe manner. Under no circumstances
should the cut-off plug be inserted into a socket outlet as
serious electrical shock may occur. The plug must not be
used without the fuse cover fitted.
When replacing the plug please ensure that you use a BSI
or ASTA approved plug to BS1363, this should be fitted
with a brown coloured 13 amp fuse approved by BSI or
ASTA to BS1362. If you have any doubt about electrical
connection seek the help of a qualified electrician.
or ASTA approved plug to BS1363, this should be fitted
with a brown coloured 13 amp fuse approved by BSI or
ASTA to BS1362. If you have any doubt about electrical
connection seek the help of a qualified electrician.
!
WARNING
THIS APPLIANCE MUST BE EARTHED.
To wire an appropriate plug, follow the wiring code given
in "To replace the mains plug" on page 30.
in "To replace the mains plug" on page 30.
!
WARNING:
Untitled-4
04.1.9, 8:17 PM
5
6
A31845,SUK R22AT/24AT O/M
EFORE OPERATION
B
•
When you first connect the microwave oven to an elec-
trical socket, the digital display will show
trical socket, the digital display will show
.
•
You can input the pads only when the door is closed.
•
Oven lamp and fan motor work for 1minute whenever
the door is opened or after cooking.
the door is opened or after cooking.
•
The programme or check mode is cancelled when
any pads are not pressed for more than 3 minutes.
any pads are not pressed for more than 3 minutes.
•
will appear on the display after the time
reaches zero. It will disappear when the oven door is
opened or the STOP/CLEAR pad is pressed.
opened or the STOP/CLEAR pad is pressed.
There are three preset volume levels of two different
sounds for your oven.
To set the volume and sound, press the SET pad twice
within 2 seconds and then continue pressing the
VOLUME pad until you hear the desired volume and sound.
Note: 1. The volume will decrease as you are pressing
sounds for your oven.
To set the volume and sound, press the SET pad twice
within 2 seconds and then continue pressing the
VOLUME pad until you hear the desired volume and sound.
Note: 1. The volume will decrease as you are pressing
the VOLUME pad. After the lowest level, the
VOLUME AND SOUND SETTING
volume will start again at the maximum level
and the sound will change to another one at
the same time.
and the sound will change to another one at
the same time.
2. The audible signal will not sound when the SET
pad is pressed once, however an audible signal
will sound when the SET pad is pressed twice.
will sound when the SET pad is pressed twice.
STOPPING THE OVEN
•
If you wish to stop the oven during cooking:
1. Press the STOP/CLEAR pad once.
2. Open the door (except memory cooking).
To start the oven again, close the door and press the
START pad within 1 minute.
1. Press the STOP/CLEAR pad once.
2. Open the door (except memory cooking).
To start the oven again, close the door and press the
START pad within 1 minute.
•
If you open the door during memory cooking, the pro-
gramme is cancelled.
gramme is cancelled.
•
If you wish to cancel a programme during cooking,
press the STOP/CLEAR pad twice.
press the STOP/CLEAR pad twice.
•
If you wish to erase a mistake during programming,
press the STOP/CLEAR pad once.
press the STOP/CLEAR pad once.
OW TO OPERATE THE OVEN
H
Introduction: Microwaves are absorbed by water, sugar
and fat in food and cause them to vibrate. This creates
heat by friction, in the same way your hands get warm
when you rub them together.
Outer areas of food are heated by microwave energy,
and remaining portions by conduction. It is, therefore,
important to turn, rearrange or stir food to ensure even
heating. Where recommended, allow food to stand, this
and fat in food and cause them to vibrate. This creates
heat by friction, in the same way your hands get warm
when you rub them together.
Outer areas of food are heated by microwave energy,
and remaining portions by conduction. It is, therefore,
important to turn, rearrange or stir food to ensure even
heating. Where recommended, allow food to stand, this
is not optional but necessary to ensure thorough cook-
ing and is particularly important for dense food, such as
joints of meat.
Microwaves pass through non-metallic dishes and uten-
sils and heat the food inside the dishes. Microwaves
are reflected by metal. The oven is lined with metal and
has a fine metallic mesh in the door to prevent micro-
wave leakage. Metallic dishes are not suitable for
microwaving.
ing and is particularly important for dense food, such as
joints of meat.
Microwaves pass through non-metallic dishes and uten-
sils and heat the food inside the dishes. Microwaves
are reflected by metal. The oven is lined with metal and
has a fine metallic mesh in the door to prevent micro-
wave leakage. Metallic dishes are not suitable for
microwaving.
MEMORY COOKING
•
This oven has 20 memory banks (1-20) which can
store cooking programmes.
store cooking programmes.
•
The memory banks 1-10 have been programmed pre-
viously as shown in the table. These preprogrammed
memory banks can be changed individually if required.
viously as shown in the table. These preprogrammed
memory banks can be changed individually if required.
•
In addition for all memory banks a magnification fac-
tor 1.8 for the double quantity is stored. The stored
magnification factor can also be changed individually
if required.
tor 1.8 for the double quantity is stored. The stored
magnification factor can also be changed individually
if required.
•
Information in these memory banks is not lost due to
power interruptions. If the power goes off, the oven
does not need to be reprogrammed. No batteries are
necessary for this type of memory.
power interruptions. If the power goes off, the oven
does not need to be reprogrammed. No batteries are
necessary for this type of memory.
•
If you want to memorize or check the programme or
cook using memory 11-20, press the desired NUMBER
pad twice within 1 second.
cook using memory 11-20, press the desired NUMBER
pad twice within 1 second.
Memory No.
1
2
3
4
5
6
7
8
9
2
3
4
5
6
7
8
9
10
Output Power
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
Cook Time
5 sec.
10 sec.
20 sec.
30 sec.
40 sec.
50 sec.
20 sec.
30 sec.
40 sec.
50 sec.
1 min.
1 min. 15 sec.
1 min. 30 sec.
1 min. 30 sec.
2 mins.
To check the stored programmes please refer to "Memory
check" on page 9.
check" on page 9.
To change the stored programmes please refer to
"Memory programme entry" on pages 7-8.
"Memory programme entry" on pages 7-8.
NOTE FOR MEMORY COOKING
Untitled-4
04.1.9, 8:17 PM
6
A31845,SUK R22AT/24AT O/M
7
MEMORY PROGRAMME ENTRY
You can change memory programmes for 20 memory banks. One, two or three sequences can be programmed.
See cooking sequence chart on top of page 11 for time maximums.
See cooking sequence chart on top of page 11 for time maximums.
Step
Action
Display
1
2
Select set mode.
* Example : If you want to set 4 minutes at 60% as the 1st sequence and 2 minutes at 30% as the 2nd sequence
for 1 serving in the memory 1.
NUMBER
Press pad
1
within 2 sec.
X 2
4
5
6
7
8
9
10
11
Enter desired cooking time for 1st
sequence. (4 minutes)
sequence. (4 minutes)
Press POWER LEVEL pad.
Enter desired power level for 1st
sequence. (60%)
sequence. (60%)
Press MANUAL/REPEAT pad.
Enter desired cooking time for 2nd
sequence. (2 minutes)
sequence. (2 minutes)
Press POWER LEVEL pad.
Enter desired power level for 2nd
sequence. (30%)
Press SET pad twice to complete
the setting.
the setting.
NUMBER
1
NUMBER
POWER
%
1
NUMBER
POWER
%
1
NUMBER
2
NUMBER
2
NUMBER
POWER
%
2
NUMBER
POWER
%
2
0
4
X 1
X 2
6
0
X 1
X 2
2
3
X 2
3
Press MANUAL/REPEAT pad.
NUMBER
1
NUMBER
MEMORIZING TIME AND POWER LEVEL
Note: 1. If the cooking time is over the max. time, the display will show "EE9". See page 13.
2. If your programmed time is over max. time at Double Quantity, you cannot use Double
Quantity for the memory. You can cook only 1 serving.
3. It is not necessary to press POWER LEVEL pad for 100%.
4. At step 1, the audible signal will not sound when the SET pad is pressed once but an
audible signal will sound when the SET pad is pressed twice.
SET
MANUAL /
REPEAT
POWER LEVEL
POWER LEVEL
MANUAL /
REPEAT
SET
Select memory number.
1
Untitled-4
04.1.9, 8:17 PM
7
Click on the first or last page to see other R-22 (serv.man5) service manuals if exist.