Sharp UP-3301 (serv.man8) Service Manual ▷ View online
UP-3301VP
SRV MODE PROGRAMMING (“2 SETTING”)
– 20 –
918-B: 1. Red color printing on KP when PLU’s unit price is zero
918-C: 1. Printing of Z1/Z2 counter in Z reports
2. Cumulating orders on KP
3. Printing the DEPT/PLU text on KP in double size character
918-D: 1. Tip paid includes cash tip
2. Clearing of tip totalizer at clerk Z1 report
3. Printing of tip totalizer on the clerk report
[JOB#919] : MRS=4000
919-A: 1. Guest look up system or PB look up system
919-B: 1. Checking of clerk# on guest check when a reorder is made
2. Entry of the number of guests
3. Guest check number
919-C: 1. Change of entry amount by with / without
2. PB entry
3. Amount printing when PLU unit price is zero
919-D: 1. Conversion ST printing of native ST
[JOB#920] : MRS=0040 : INLINE PROGRAMMING AREA
920-A: 1. Racapitulate registration.
2. Non add entry printing.
3. Back-up master function.
920-B: 1. System report and down-load job is executed in the back-up
master.
2. The GLU finalization is executed in the satellite.
3. The clerk system
1. Red color printing on KP when PLU’s unit price is
zero
918-B
No
0
★
Yes
2
1. Printing
of
Z1/Z2
counter in
Z reports
counter in
Z reports
2. Cumulating
orders
on KP
3. Printing the
DEPT/PLU text
on KP in double
size character
on KP in double
size character
918-C
Yes
No
(Recapitulation)
No
0
★
Yes
1
Yes
(Non Recapitulation)
No
2
Yes
3
No
No
(Recapitulation)
No
4
Yes
5
Yes
(Non Recapitulation)
No
6
Yes
7
1. Tip paid
includes cash
tip
tip
2. Clearing of tip
totalizer at
server Z1
report
server Z1
report
3. Printing of tip
totalizer on
the server
report
the server
report
918-D
Yes
No
No
0
★
Yes
1
Yes
No
2
Yes
3
No
No
No
4
Yes
5
Yes
No
6
Yes
7
1. Guest look up system or PB look up system
919-A
PBLU
2
GLU
4
★
1. Checking of
clerk# on guest
check when a
reorder is made
check when a
reorder is made
2. Entry of the
number of
guests
guests
3. Guest check
number
919-B
Yes
Inhibit
Auto generation
0
★
Manual
1
Compulsory
Auto generation
2
Manual
3
No
Inhibit
Auto generation
4
Manual
5
Compulsory
Auto generation
6
Manual
7
Note: If change of entry amount is set to “No”, the Department
for COMBO MEAL is updated (by minus or plus amount)
in order to match the turnover totals (DEPT. Total = PLU
Normal Sales Total).
This update should be considered for the influence of
VAT calculation.
in order to match the turnover totals (DEPT. Total = PLU
Normal Sales Total).
This update should be considered for the influence of
VAT calculation.
1. Change
of
entry amount
by with / without
by with / without
2. PB entry
3. Amount print-
ing when PLU
unit price is zero
unit price is zero
919-C
No
Non-compulsory
No
0
★
Yes
1
Compulsory
No
2
Yes
3
Yes
Non-compulsory
No
4
Yes
5
Compulsory
No
6
Yes
7
1. Conversion SBTL print of native SBTL
919-D
Yes
0
★
No
4
1. Racapitulate
registration.
2. Non add
entry printing.
3. Back-up mas-
ter function.
920-A
Yes
Only last one
before item entry
Not
0
★
Exist
1
All
Not
2
Exist
3
No
Only last one
before item entry
Not
4
Exist
5
All
Not
6
Exist
7
1. System report and
down-load job is
executed in the
back-up master.
executed in the
back-up master.
2. The GLU
finalization is
executed in
the satellite.
executed in
the satellite.
3. The clerk
system
920-B
Disable
Enable
Centralized
0
★
Individual
1
Disable
Centralized
2
Individual
3
Enable
Enable
Centralized
4
Individual
5
Disable
Centralized
6
Individual
7
UP-3301VP
SRV MODE PROGRAMMING (“2 SETTING”)
– 21 –
920-C: 1. Broadcast communication (in-line)
2. PGM-mode programming at the satellite
920-D: 1. The register is
[JOB#921] : MRS=0000
921-A: 1. Promortion (M&M) specification
921-B: 1. GLU system
2. Drive thru system
3. Drive thru entry
921-C: 1. VAT shift operation timing .
2. Bill printing method.
921-D: 1. Drive thru machine location
[JOB#922] : MRS=0000
922-A: Not used (Fixed at “0”)
922-B: 1. The void totalizer report
922-C, D: Not used (Fixed at “00”)
[JOB#923] : MRS=0010 : INLINE PROGRAMMING AREA
923-A, B: 1. The record number for REQUEST of T-LOG POLLING
(x100)
Explanation for satellite:
Ex: When AB=10 The satellite will request to the master to poll the T-
log when the T-log records exceed 1,000.
923-C: 1. T-log function
923-D: 1. Polling cycle (second)
[JOB#924]: MRS=0000 : INLINE PROGRAMMING AREA
924-A: 1. Report printing when consolidation daily and periodic cash-
ier reading or resetting is taken.
2. PLU save file.
924-B: 1. Save file except for PLU.Programming whether or not to
lock REG-mode entries after individual daily total resetting
2. Locking after clerk resetting
3. Locking after term clerk resetting
1. Broadcast communica-
tion
2. PGM-mode program-
ming at the satellite
920-C
Exist
Disable
0
Enable
1
By terminal No.
Disable
4
★
Enable
5
1. The register is
920-D
Standard alone machine
0
★
Satellite
1
Master
2
Back up master
3
1. Promortion (M&M) specification
921-A
Normal
0
★
Set selling (SUK Spec.)
1
1. GLU system
2. Drive thru
system
3. Drive
thru
entry
921-B
Centralized
Centralized
Non-compulsory
0
★
Compulsory
1
Individual
Non-compulsory
2
Compulsory
3
Individual
Centralized
Non-compulsory
4
Compulsory
5
Individual
Non-compulsory
6
Compulsory
7
1. VAT shift operation
timing
2. Bill printing method
921-C
Only at the start of
transaction
Whole printing per each
issue
0
★
Continuous
1
Only at the end of
transaction
Whole printing per each
issue
2
Continuous
3
1. Drive thru machine location
921-D
Cashier Station
0
★
Order Taker
1
Counter
2
1. The void totalizer report
922-B
The Void for items which are printed in the receipt
printer or kitchen printer are only reported in the Void
Totalizer
0
★
The all Void for items are reported in the Void Totalizer
4
1. The record number for REQUEST of T-LOG
POLLING (x100)
923-AB
0000 ~ 9900
00-99
1. T-log function
923-C
No
0
Yes
1
★
1. Polling cycle (second)
923-D
0 ~ 9 Sec.
0 ~ 9
1. Report printing when consolida-
tion daily and periodic cashier
reading or resetting is taken.
reading or resetting is taken.
2. PLU save
file.
924-A
Printing of report on individual register
Not
0
★
Exist
1
Printing of both i.e. reports on individ-
ual machines and consolidation report
on the entire system
Not
4
Exist
5
1. Save file
except for
PLU.
PLU.
2. Locking after
clerk resetting
3. Locking
after
term clerk
resetting
resetting
924-B
Not
Yes
Yes
0
★
No
1
No
Yes
2
No
3
Exist
Yes
Yes
4
No
5
No
Yes
6
No
7
UP-3301VP
SRV MODE PROGRAMMING (“2 SETTING”)
– 22 –
924-C: Programming whether or not to lock REG-mode entries after
individual daily total resetting when the system has no save file.
1. Locking Hourly resetting.
2. Locking after General resetting
924-D: Programming whether or not to lock REG-mode entries after
individual periodic total resetting
1. Locking after Daily Net resetting
2. Locking after General resetting
[JOB#925] : MRS=0100 : INLINE PROGRAMMING AREA
925-A: 1. Selection of the method of daily total general consolidation
resetting at the master.
2. Clearing of the individual resetting memory at the time of
consolidation daily total general resetting.
3. Execution of RESET CLEAR when consolidation daily total
general resetting has not been taken.
925-B: 1. Any entry operation is inhibited until RESET CLEAR is exe-
cuted after consolidation daily total transaction resetting has
been taken.
been taken.
2. Various individual resetting
925-C: 1. Report printing when consolidation daily and periodic total
transaction reading or resetting is taken
925-D: 1. PLU/IN GREDIENT stock control system.
2. Resetting in the open store state.
[JOB#926] : MRS=0004
926-A: 1. Void item print on KP that has already ordered.
926-B: 1. Sending “REFUND DATA” on KP
#926-C: Not used (Fixed at “0”)
#926-D:1. DEPT/PLU text printing
2. Check VP format
[JOB#927] MRS = 0000
#927-A: 1. Rounding up of the units digit of amount
#927-B: 1. Rounding down of the units digit of amount
1. Rounding the units digit of amount927-AB
#927-C:1. Difference memory (Difference between before-rounding
and after-rounding)
2. Limit on the least significant digit in entering the amount on item
1. Locking Hourly reset-
ting.
2. Locking after General
resetting
924-C
Yes
Yes
0
★
No
1
No
Yes
2
No
3
1. Locking after Daily Net
resetting
2. Locking after General
resetting
924-D
Yes
Yes
0
★
No
1
No
Yes
2
No
3
Method -1: Those data that has individually been reset and
the current sales data are reset together.
Method -2: Only those data that has individually been reset
is reset.
1. Selection of
the method
of daily total
general
consolida-
tion reset-
ting at the
master.
of daily total
general
consolida-
tion reset-
ting at the
master.
2. Clearing of the
individual
resetting
memory at the
time of consol-
idation daily
total general
resetting.
resetting
memory at the
time of consol-
idation daily
total general
resetting.
3. Execution of
RESET
CLEAR when
consolidation
daily total gen-
eral resetting
has not been
taken.
CLEAR when
consolidation
daily total gen-
eral resetting
has not been
taken.
925-A
Method -1
Yes
Disable
0
★
Enable
1
No
Disable
2
Enable
3
Method -2
Yes
Disable
4
Enable
5
No
Disable
6
Enable
7
1. Any entry operation is inhibited until
RESET CLEAR is executed after
consolidation daily total transaction
resetting has been taken.
consolidation daily total transaction
resetting has been taken.
2. Various
individual
resetting
resetting
925-B
Yes
Disable
0
Enable
1
★
No
Disable
2
Enable
3
1. Report printing when consolidation daily and peri-
odic total transaction reading or resetting is taken
925-C
Printing of both i.e. reports on individual machines and
consolidation report on the entire system
0
★
Printing of consolidation report on the entire system
1
Printing of report on individual register
2
1. PLU/IN GREDIENT
stock control system.
2. Resetting in the open
store state.
925-D
Centralized
Disable
0
★
Enable
1
Individual
Disable
4
Enable
5
1.Void item print on KP that has already ordered.
926-A
Yes
0
★
No
1
1.Sending “REFUND DATA” on KP
926-B
Yes
0
★
No
2
1. DEPT/PLU text printing
2. Check VP
926-D
Normal
Normal
0
Cheque EURO
2
Double
Normal
4
★
Cheque EURO
6
Common destination
00
★
Netherlands/Switzerland
82
Norway
54
1. Difference
memory
2. Limit on the least significant digit
in entering the amount on item
927-C
No
Arbitary
0
★
0 only
1
0 and 5 only
2
Yes
Arbitary
4
0 only
5
0 and 5 only
6
UP-3301VP
SRV MODE PROGRAMMING (“2 SETTING”)
– 23 –
#927-D:1. Application of rounding
2. Limit on the least significant digit in entering the amount of
payment
[JOB#928] : MRS=0064
#928-A: 1. Printing of slip logo text (Graphical logo and text)
#928-B:1. VP message printing on slip
2. Header line print on slip paper when a reorder is made.
928-C: 1. Printing of PLU on bill when it is 0
2. Printing of text for associated PLU in COMBO MEAL on bill.
#928-D:1. Printing of PB/NBAL on slip
2. Compulsory Bill print system
• The slip printing at NBAL in GLU system is not compulsory always.
[JOB#929] : MRS=0000
#929-A:1. The solid line printing under item printing
2. Sorted printing on Bill (Receipt/Slip) when sorted receipt function
929-B: 1. Logo text print on journal
2. Clerk-Z with open GLU (#181)
929-C, D: Not used (Fixed at “00”)
[JOB#980] : MRS=0000
980-A: 1. Entry of location
2. Labor cost
980-B: 1. Item printing that registrated by Drink Dispenser.
2. Total amount rounding when a transaction is finalized
directly by CHECK or CREDIT key. (For SCA)
• This selection is not effective at Manual TAX 1-6 system.
980-C: 1. LEVEL SHIFT at L2 / L3 (for SUK) when LEVEL SHIFT return
timing method is AUTO and BY ONE ITEM in PGM setting
2. PRICE SHIFT at P2 / P3 (for SUK) when PRICE SHIFT return
timing method is AUTO and BY ONE ITEM in PGM setting
3. PINT SHIFT at PINT sale (for SUK)
1. Application
of rounding
2. Limit on the least significant digit
in entering the amount of payment
927-D
Item & Payment
Arbitary
0
★
0 only
1
0 and 5 only
2
Payment
Arbitary
4
0 only
5
0 and 5 only
6
1. Printing of slip logo text (Graphical logo and text)
928-A
No
0
★
Yes
1
1. VP message printing
on slip
2. Header line print on
slip paper when a reor-
der is made.
der is made.
928-B
Check only
Printed
0
★
Not
1
heck & Credit
Printed
2
Not
3
1. Printing of PLU on bill
when it is 0
2. Printing of text for
associated PLU in
COMBO MEAL on bill.
COMBO MEAL on bill.
928-C
Yes
Yes
0
No
2
No
Yes
4
No
6
★
1. Printing of PB/
NBAL on slip
2. Compulsory Bill print system
928-D
Yes
According to each media’s preset
0
Compulsory for every entry
1
Compulsory for PB
2
No
According to each media’s preset
4
★
Compulsory for every entry
5
Compulsory for PB
6
1. The solid line printing
under item printing
2. Sorted printing on Bill
(Receipt/Slip) when
sorted receipt function
sorted receipt function
929-A
No
No
0
★
Yes
2
Yes
No
4
Yes
6
1. Logo text print on jour-
nal
2. Clerk-Z with open GLU
(#181)
929-B
No
Disable
0
★
Enable
1
Yes
Disable
2
Enable
3
1. Entry of location
2. Labor cost
980-A
Inhibit
Not
0
★
Calculate
2
Allow
Not
4
Calculate
6
1. Item printing that regis-
trated by Drink Dis-
penser.
penser.
2. Total amount rounding
when a transaction is
finalized directly by
CHECK or CREDIT
key. (For Australia)
finalized directly by
CHECK or CREDIT
key. (For Australia)
980-B
Skip
No (Not rounding)
0
★
Yes (Rounding)
2
Print
No (Not rounding)
4
Yes (Rounding)
6
1. LEVEL SHIFT at
L2 / L3 (for SUK)
when LEVEL
SHIFT return
timing method is
AUTO and BY
ONE ITEM in
PGM setting
when LEVEL
SHIFT return
timing method is
AUTO and BY
ONE ITEM in
PGM setting
2. PRICE SHIFT at
P2 / P3 (for SUK)
when PRICE
SHIFT return
timing method is
AUTO and BY
ONE ITEM in
PGM setting
when PRICE
SHIFT return
timing method is
AUTO and BY
ONE ITEM in
PGM setting
3. PINT
SHIFT at
PINT
sale (for
SUK)
PINT
sale (for
SUK)
980-C
Repeat
Repeat
Repeat
0
★
One shot
(Return to
normal)
1
One shot
(Return to P1)
Repeat
2
One shot
(Return to
normal)
3
One shot
(Return to L1)
Repeat
Repeat
4
One shot
(Return to
normal)
5
One shot
(Return to P1)
Repeat
6
One shot
(Return to
normal)
7
Click on the first or last page to see other UP-3301 (serv.man8) service manuals if exist.