Sharp RZ-X660 (serv.man3) Service Manual ▷ View online
55
ACPI Configuration
Suspend to RAM
Use this item to select whether to auto-detect or disable the Suspend-to-RAM
feature. Select [Auto] will enable this feature if the OS supports it.
ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Enabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows® certification.
PS/2 Keyboard Power On
Use this item to enable or disable PS/2 keyboard to turn on the system from
the power-soft-off mode.
PCIE Devices Power On
Use this item to enable or disable PCIE devices to turn on the system from the
power-soft-off mode.
RTC Alarm Power On
Use this item to enable or disable RTC (Real Time Clock) to power on the system.
USB Keyboard/Remote Power On
Use this item to enable or disable USB Keyboard/Remote to power on the
system.
USB Mouse Power On
Use this item to enable or disable USB Mouse to power on the system.
56
USB Configuration
USB Controller
Use this item to enable or disable the use of USB controller.
Intel USB 3.0 Mode
Select Intel® USB 3.0 controller mode. Set [Smart Auto] to keep the USB 3.0
driver enabled after rebooting (USB 3.0 is enabled in BIOS). Set [Auto] to
automatically enable the USB 3.0 driver after entering the OS (USB 3.0 is
disabled in BIOS). Set [Enabled] to keep the USB 3.0 driver enabled (Must
install driver to use USB devices under Windows® 7). Set [Disabled] to disable
the USB 3.0 ports.
Legacy USB Support
Use this option to select legacy support for USB devices. There are four
configuration options: [Enabled], [Auto] and [UEFI Setup Only]. The default
value is [Auto]. Please refer to below descriptions for the details of these four
options:
[Enabled] - Enables support for legacy USB.
[Auto] - Enables legacy support if USB devices are connected.
[UEFI Setup Only] - USB devices are allowed to use only under UEFI setup and
Windows / Linux OS.
57
Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature,
CPU fan speed, chassis fan speed, and the critical voltage.
FAN1 Setting
This allows you to set FAN1’s speed. Configuration options: [Full On] and
[Automatic Mode]. The default value is [Full On].
Case Open Feature
This allows you to enable or disable case open detection feature. The default is
value [Disabled].
Clear Status
This option appears only when the case open has been detected. Use this
option to keep or clear the record of previous chassis intrusion status.
58
Security Screen
In this section, you may set, change or clear the supervisor/user password for the
system.
Supervisor Password
Set or change the password for the administrator account. Only the
administrator has authority to change the settings in the UEFI Setup Utility.
Leave it blank and press enter to remove the password.
User Password
Set or change the password for the user account. Users are unable to change
the settings in the UEFI Setup Utility. Leave it blank and press enter to remove
the password.
Secure Boot
Enable to support Windows 8 64-bit Secure Boot.
Click on the first or last page to see other RZ-X660 (serv.man3) service manuals if exist.