Sharp RZ-X650 (serv.man3) Service Manual ▷ View online
28
Remove screws of the HDD plastic cover, disassembly the HDD plastic cover.
3
After remove the screws of the HDD, take off the HDD and disconnect the power and
data cables.
data cables.
4
29
Remove screws from the HDD bracket and the HDD. After attaching the HDD to
bracket, tighten screws of the HDD.
bracket, tighten screws of the HDD.
5
Connect the power and data cables to the HDD. After tighten screws of the HDD
metal cover
metal cover
6
2
2
1
1
30
After tighten the HDD plastic cover.
7
Assemble in the opposite way of disassembly and connect the peripheral cables &
DC power input jack.
DC power input jack.
8
Replacing the main memory
Make sure the system and peripherals are off.
1
Remove screws of the HDD plastic cover, disassembly the HDD plastic cover.
3
After removing screws of the HDD metal cover, take off the hard disk and
disconnect the power and data cables.
disconnect the power and data cables.
6
Remove screws of the stand, disassembly the CDP and MSR.
4
Remove screws of the back metal cover and the back metal cover.
7
Remove screws of the back plastic cover, remove the back plastic cover.
5
Make sure that the eject clips on both sides of the socket are open.
8
Disconnect cables for the peripherals and DC power input jack from the system.
2
31
Align the notches of the DIMM memory with the slot keys of the socket. This allows the
memory to be inserted. Gently push the memory into the slot until both eject clips rise
to the lock position.
memory to be inserted. Gently push the memory into the slot until both eject clips rise
to the lock position.
9
Assemble it in the opposite way of disassembly and connect the peripheral cables &
DC power input jack.
DC power input jack.
10
Replacing the Lithium battery
Make sure the system and peripherals are off.
1
Remove screws of the HDD plastic cover, disassembly the HDD plastic cover.
3
After removing screws of the HDD metal cover, take off the hard disk and disconnect
the power and data cables.
the power and data cables.
6
Remove screws of the stand, disassembly the CDP and MSR.
4
Remove screws of the back metal cover and the back metal cover.
7
Remove screws of the back plastic cover, remove the back plastic cover.
5
Disconnect cables for the peripherals and DC power input jack from the system.
2
Click on the first or last page to see other RZ-X650 (serv.man3) service manuals if exist.