Sharp RZ-X650 (serv.man3) Service Manual ▷ View online
8
Product overview
Front
Operation Display (Touch Panel)
15 inch TFT-LCD screen with touch sensitive screen. Displays the operational status of
the system and the system can be adjusted by touch screen.
the system and the system can be adjusted by touch screen.
1
Power button
Push button to turn terminal on (AC connection required).
When terminal is on push button to initiate Windows Shutdown
When terminal is on push button to initiate Windows Shutdown
2
HDD indicator
LED lights up during hard drive activity.
3
Power indicator
LED lights up when the system is on.
4
2
1
3 4 5
6
LCD brightness control
Adjusts the brightness of the screen. (increase / decrease)
5
Magnetic Stripe Reader (optional)
For reading magnetic stripe cards.
6
9
1
2
3
4 5 6 7
9
10
1
2
3
4 5 6 7 8
9
10
Rear / IO Ports
U, LU
V4, V6, V7, V9
10
USB connectors
You can connect peripherals such as scanners, printers and keyboard to the USB (Universal
Serial Bus) connectors. USB peripherals are hot swappable enabling plug and play.
Serial Bus) connectors. USB peripherals are hot swappable enabling plug and play.
3
LAN connector (RJ 45)
Connect RJ-45 cable for 10/100/1000 Base Ethernet connection to this port.
4
Audio jack
An external amplified speaker may be connected to the jack for audio output.
5
DC inlet Jack ( for AC adaptor)
Connection for supplied power adpator to supply system power.
6
DC outlet Jack ( for future usage)
7
8
Cash Drawer Ports (2 * 3 pin Molex)(Type B)
Optional Sharp cash drawers can be connected to cash drawer port.
9
Parallel Port
Connects parallel devices such as a printer to the parallel port.
10
HDD rear cover
Serial Port 1, 2, 3, (4) (Type A)
Connects serial devices such as a customer display, a barcode scanner, or a receipt printer
that use serial interface to the serial ports.
that use serial interface to the serial ports.
1
VGA Connector
Connects VGA cable from a 2nd monitor.
2
Note:
•
Default voltage at Pin 9 of COM2 / COM3 is 5V.
11
DISPLAY
Display angle
The display may be tilted for the best viewing angle. The angle can be adjusted within
140 degrees left/right and 45 degrees up/down as illustrated in the picture.
140 degrees left/right and 45 degrees up/down as illustrated in the picture.
Caution:
•
Do not pull the display beyond the maximum tilt angle nor apply excessive pressure to the
display.
display.
•
The LCD module built in this POS terminal is manufactured with highly precise technology,
however bright pixels or blank pixels may appear. Also an irregular color and brightness may
occur depending on the view angle. Please note that this type of phenomena is common for
LCDs and may not be a malfunction.
however bright pixels or blank pixels may appear. Also an irregular color and brightness may
occur depending on the view angle. Please note that this type of phenomena is common for
LCDs and may not be a malfunction.
•
The backlight in the display is a consumable part. (the backlight tube is a part of LCD-unit and
not separate changeable)
not separate changeable)
•
When the LCD display can no longer be adjusted and becomes darker, you should replace the
LCD module. Consult your authorized SHARP dealer for further details.
LCD module. Consult your authorized SHARP dealer for further details.
Click on the first or last page to see other RZ-X650 (serv.man3) service manuals if exist.