Sharp RZ-X650 (serv.man3) Service Manual ▷ View online
40
User can set up Draw, Advanced Calibration,
Right Button Icon, and Right Button Emulation
in the tool tab, and utilize them.
Right Button Icon, and Right Button Emulation
in the tool tab, and utilize them.
4
You can check the information of PenMount in
the “About tab”.
the “About tab”.
5
Notice for using touch panel!
•
In case of using touch panel
- Do not touch the panel with sharp instruments such as knife or writing pen
- Please touch the panel with the designated stylus or finger.
- Please polish the touch panel with alcohol and soft cloth only.
- Be careful to prevent alcohol from leaking into the touch panel.
- Do not use other solvent except for alcohol.
- Misuse of the touch panel can damages the product. Damage to the touch screen can cause
- Please touch the panel with the designated stylus or finger.
- Please polish the touch panel with alcohol and soft cloth only.
- Be careful to prevent alcohol from leaking into the touch panel.
- Do not use other solvent except for alcohol.
- Misuse of the touch panel can damages the product. Damage to the touch screen can cause
errors in registering touch locations accurately.
•
In case of preserving touch panel
- Please keep the product under the standard temperature and humidity.
- Please keep the product in package.
- Do not stack products, and do not place any materials on it.
- Keep the product out of the direct rays of the sun.
- Keep the product away from fire.
- Misuse of product can cause exterior variation.
- Please keep the product in package.
- Do not stack products, and do not place any materials on it.
- Keep the product out of the direct rays of the sun.
- Keep the product away from fire.
- Misuse of product can cause exterior variation.
41
•
In case of assembling touch panel
- Do not use strong force on the touch panel.
- Be careful not to break touch panel, and place it on the soft materials such as sponge.
- Do not pull on touch panel FPC cable or use unnecessary force during assembly.
- If the FPC cable is damaged the touch panel will not register contact in the correct locations.
- Be careful not to break touch panel, and place it on the soft materials such as sponge.
- Do not pull on touch panel FPC cable or use unnecessary force during assembly.
- If the FPC cable is damaged the touch panel will not register contact in the correct locations.
42
PCB OVERVIEW
System Main B/D
System Block Diagram
43
Main board Block Diagram
Click on the first or last page to see other RZ-X650 (serv.man3) service manuals if exist.