Sharp ER-A770 (serv.man6) Service Manual ▷ View online
924-C: Programming whether or not to lock REG-mode entries after
individual daily total resetting when the system has no save file.
1. Locking after Hourly resetting.
2. Locking after General resetting
1. Locking after Hourly
resetting.
2. Locking after General
resetting
924-C
Yes
Yes
0
★
No
1
No
Yes
2
No
3
924-D: Programming whether or not to lock REG-mode entries after
individual periodic total resetting
1. Locking after Daily Net resetting
2. Locking after General resetting
1. Locking after Daily Net
resetting
2. Locking after General
resetting
924-D
Yes
Yes
0
★
No
1
No
Yes
2
No
3
[JOB#925] : MRS=0100 : INLINE PROGRAMMING AREA
925-A: 1. Selection of the method of daily total general consolida-
tion resetting at the master.
Method -1 :
Those data that has individually been reset
and the current sales data are reset to-
gether.
and the current sales data are reset to-
gether.
Method -2 :
Only those data that has individually been
reset is reset.
reset is reset.
2. Clearing of the individual resetting memory at the time of
consolidation daily total general resetting.
3. Execution of RESET CLEAR when consolidation daily to-
tal general resetting has not been taken.
1. Selection of
the method of
daily total
general
consolidation
resetting at
the master.
daily total
general
consolidation
resetting at
the master.
2. Clearing of
the individual
resetting
memory at
the time of
consolidation
daily total
general
resetting.
resetting
memory at
the time of
consolidation
daily total
general
resetting.
3. Execution of
RESET
CLEAR when
consolidation
daily total
general
resetting has
not been
taken.
CLEAR when
consolidation
daily total
general
resetting has
not been
taken.
925-A
Method -1
Yes
Disable
0
★
Enable
1
No
Disable
2
Enable
3
Method -2
Yes
Disable
4
Enable
5
No
Disable
6
Enable
7
925-B: 1. Any entry operation is inhibited until RESET CLEAR is
executed after consolidation daily total transaction reset-
ting has been taken.
ting has been taken.
2. Various individual resetting
1. Any entry operation is inhibited until
RESET CLEAR is executed after
consolidation daily total transaction
resetting has been taken.
consolidation daily total transaction
resetting has been taken.
2. Various
individual
resetting
resetting
925-B
Yes
Disable
0
Enable
1
★
No
Disable
2
Enable
3
925-C: 1. Report printing when consolidation daily and periodic total
transaction reading or resetting is taken
1. Report printing when consolidation daily and
periodic total transaction reading or resetting is taken
925-C
Printing of both i.e. reports on individual machines and
consolidation report on the entire system
0
★
Printing of consolidation report on the entire system
1
Printing of report on individual register
2
925-D: 1. PLU/INGREDIENT stock control system.
2. Resetting in the open store state.
1. PLU/INGREDIENT
stock control system.
2. Resetting in the open
store state.
925-D
Centralized
Disable
0
★
Enable
1
Individual
Disable
4
Enable
5
[JOB#926] : MRS=0000
926-A: 1. Void item print on KP that has already ordered.
1. Void item print on KP that has already ordered.
926-A
Yes
0
★
No
1
926-B: 1. Sending “REFUND DATA” on KP
1. Sending “REFUND DATA” on KP
926-B
Yes
0
★
No
2
#926-C: 1. Open store / Close store at stand alone POS with online
2. Send AT command starting with Job#500
3. Send AT command starting with Job#501
3. Send AT command starting with Job#501
1. Open store /
Close Store
at stand alone
POS with
Online
at stand alone
POS with
Online
2. Send AT
command
starting with
Job#500
starting with
Job#500
3. Send AT
command
starting with
Job#501
starting with
Job#501
926-C
No
No
No
0
★
Yes
1
Yes
No
2
Yes
3
Yes
No
No
4
Yes
5
Yes
No
6
Yes
7
#926-D: 1. Check VP format
1. Check VP
926-D
Normal
0
★
French check
2
[JOB#927] : MRS = 0000
#927-A: 1. Rounding up of the units digit of amount
#927-B: 1. Rounding down of the units digit of amount
1. Rounding the units digit of amount
927-AB
Common destination
00
★
Netherlands/Switzerland
82
Norway
54
#927-C: 1. Difference memory (Difference between before-rounding
and after-rounding)
2. Limit on the least significant digit in entering the amount
on item
1. Difference memory
2. Limit on the least
significant digit in
entering the amount on
item
entering the amount on
item
927-C
No
Arbitary
0
★
0 only
1
0 and 5 only
2
Yes
Arbitary
4
0 only
5
0 and 5 only
6
#927-D: 1. Application of rounding
2. Limit on the least significant digit in entering the amount
of payment
1. Application of rounding
2. Limit on the least
significant digit in
entering the amount of
payment
entering the amount of
payment
927-D
Item & Payment
Arbitary
0
★
0 only
1
0 and 5 only
2
Payment
Arbitary
4
0 only
5
0 and 5 only
6
[JOB#928] : MRS=0064
#928-A: 1. Printing of slip logo text
1. Printing of slip logo text
928-A
No
0
★
Yes
1
#928-B: 1. VP message printing on slip
2. Header line print on slip paper when a reorder is made.
1. VP message printing
on slip
2. Header line print on slip
paper when a reorder
is made.
is made.
928-B
Check only
Printed
0
★
Not
1
Check & Credit
Printed
2
Not
3
928-C: 1. Printing of PLU on bill when it is 0
2. Printing of text for associated PLU in COMBO MEAL on
bill.
1. Printing of PLU on bill
when it is 0
2. Printing of text for
associated PLU in
COMBO MEAL on bill.
COMBO MEAL on bill.
928-C
Yes
Yes
0
No
2
No
Yes
4
No
6
★
#928-D: 1. Printing of PB/NBAL on slip
2. Compulsory Bill print system
1. Printing of PB/NBAL on
slip
2. Compulsory Bill print
system
928-D
Yes
According to each
media’s preset
0
Compulsory for every
entry
1
Compulsory for PB
2
No
According to each
media’s preset
4
★
Compulsory for every
entry
5
Compulsory for PB
6
The slip printing at NBAL in GLU system is not compulsory always.
[JOB#929] : MRS=0000
#929-A: 1. The solid line printing under item printing
2. Sorted printing on Bill (Receipt/Slip) when sorted receipt
function
1. The solid line printing
under item printing
2. Sorted printing on Bill
(Receipt/Slip) when
sorted receipt function
sorted receipt function
929-A
No
No
0
★
Yes
2
Yes
No
4
Yes
6
929-B: 1. Logo text print on journal
2. Clerk-Z with open GLU (#181)
1. Logo text print on
journal
2. Clerk-Z with open GLU
(#181)
929-B
No
Disable
0
★
Enable
1
Yes
Disable
2
Enable
3
929-C: Not used (Fixed at “0”)
929-D: 1. Taxable status of PLU which is set of Non-Taxable
1. Taxable status of PLU which is set of Non-Taxable
929-D
According to its associated Dept.
0
★
Non-Taxable
2
[JOB#980] : MRS=0002
980-A: 1. Entry of location
2. Labor cost
1. Entry of location
2. Labor cost
980-A
Inhibit
Not
0
★
Calculate
2
Allow
Not
4
Calculate
6
980-B: 1. Item printing that registrated by Drink Dispenser.
2. Total amount rounding when a transaction is finalized di-
rectly by CHECK or CREDIT key. (For SCA)
This selection is not effective at Manual TAX 1-6 system.
1. Item printing that
registrated by Drink
Dispenser.
Dispenser.
2. Total amount rounding
when a transaction is
finalized directly by
CHECK or CREDIT
key. (For Australia)
finalized directly by
CHECK or CREDIT
key. (For Australia)
980-B
Skip
Yes (Rounding)
0
★
No (Not rounding)
2
Print
Yes (Rounding)
4
No (Not rounding)
6
980-C: 1. LEVEL SHIFT at L2 / L3 ( for SUK ) when LEVEL SHIFT
return timing method is AUTO and BY ONE ITEM in PGM
setting
setting
2. PRICE SHIFT at P2 / P3 ( for SUK ) when PRICE SHIFT
return timing method is AUTO and BY ONE ITEM in PGM
setting
setting
3. PINT SHIFT at PINT sale ( for SUK )
1. LEVEL SHIFT
at L2 / L3 ( for
SUK ) when
LEVEL SHIFT
return timing
method is
AUTO and BY
ONE ITEM in
PGM setting
SUK ) when
LEVEL SHIFT
return timing
method is
AUTO and BY
ONE ITEM in
PGM setting
2. PRICE SHIFT
at P2 / P3
( for SUK )
when PRICE
SHIFT return
timing method
is AUTO and
BY ONE ITEM
in PGM setting
( for SUK )
when PRICE
SHIFT return
timing method
is AUTO and
BY ONE ITEM
in PGM setting
3. PINT SHIFT
at PINT sale
( for SUK )
( for SUK )
980-C
Repeat
Repeat
Repeat
0
★
One shot
(Return to normal)
1
One shot
(Return to P1)
Repeat
2
One shot
(Return to normal)
3
One shot
(Return to L1)
Repeat
Repeat
4
One shot
(Return to normal)
5
One shot
(Return to P1)
Repeat
6
One shot
(Return to normal)
7
980-D: 1. Sorted receipt / Normal receipt
2. VAT / TAX assignment print
1. Sorted receipt /
Normal receipt
2. VAT / TAX
assignment print
980-D
Normal receipt
Print
0
Not
2
★
Sorted receipt
Print
4
Not
6
[JOB#981] : MRS=0010
981-A: 1. Z report on only display.
1. Z report on only display.
981-A
Disable
0
★
Enable
2
981-B: 1. Condiment printing on KP.
2. Condiment Link method.
1. Condiment printing on KP. 2. Condiment Link method.
981-B
According to each PLU
Table & Item link
0
★
Table link
2
According to MENU PLU
Table & Item link
4
Table link
6
981-C: 1. When KP Channel Number is Zero, the chit receipt is
printed
2. Final Key is TOTAL STATUS KEY in GLU Operation
3. PLU Group 0 setting
3. PLU Group 0 setting
1. When KP
Channel
Number is
Zero, the chit
receipt is
printed
Number is
Zero, the chit
receipt is
printed
2. Final Key is
TOTAL
STATUS KEY
in GLU
operation
STATUS KEY
in GLU
operation
3. PLU Group 0
setting
981-C
Yes
Not
Disable
0
Enable
1
★
Yes
Disable
2
Enable
3
No
Not
Disable
4
Enable
5
Yes
Disable
6
Enable
7
981-D: Not used (fixed at “0”)
[JOB#982] : MRS=3001 SETTING FOR Drink Dispenser
982-A,B,C: 1. Maximum number of times of auto retry. = 000 - 300
(times)
Indication of “000” is regarded as infinite.
982-D: 1. Setting of Drink Dispenser No. = 1 - 8
Note: It is necessary to set the drink dispenser number to 0
(zero) for those machines which no Drink Dispenser is
being connected.
being connected.
[JOB#983] : MRS=0102 SETTING FOR Drink Dispenser
983-A,B: 1. Interval for auto retry. = 00 - 99 (sec.)
983-C,D: 1. Setting of Drink Dispenser sales termination timer.
= 00 - 31 (sec.)
Note: Setting is allowed in integer times of 10
sec..(Valid only in GLU/PBLU system)
Ex. 02 = 20 Sec.
3. [3 Z REPORT COUNTER]
DISPLAY: Setting item select screen
Select “3 Z REPORT COUNTER” and press the ENTER key.
DISPLAY: Z REPORT COUNTER screen
Select the report to be changed and enter the value
The content of displayed reports are as listed in the
table below.
table below.
DISPLAY TEXT
CONTENTS
MRS
GENERAL Z1
General Z1 reset counter
000
GENERAL Z2
General Z2 reset counter
000
CONSOLI. GEN. Z1
Consolidation General Z1 reset
counter
counter
000
CONSOLI. GEN. Z2
Consolidation General Z2 reset
counter
counter
000
CLERK Z1
Clerk Z1 reset counter
000
HOURLY Z1
Houlry Z1 reset counter
000
PLU Z1
PLU Z1 reset counter
000
GLU Z1
GLU / PBLU Z1 reset counter
000
DRIVE THRU Z1
DRIVE THRU Z1 reset counter
000
DAILY NET Z2
Daily net Z2 reset counter
000
4. [4 GT]
DISPLAY:
Setting item select screen
Select "4 GT" and press the ENTER key.
DISPLAY: GT COUNTER screen
Select the GT to be changed and enter the value
The content of displayed GT are as listed in the table
below.
below.
DISPLAY TEXT
CONTENTS
MRS
POSITIVE GT
GT2 (Positive GT) : Max.13 digits
0.00
NEGATIVE GT
GT3 (Negative GT) : Max.13 digits
0.00
GT1 is obtained by the following equation.
EQUATION: GT1 = GT2 – GT3
Click on the first or last page to see other ER-A770 (serv.man6) service manuals if exist.