Sharp XE-A137 (serv.man3) User Manual / Operation Manual ▷ View online
47
■
Function parameters for
V
AB
A
To program “0” for all items
@
V
To program again
Item:
Selection:
Entry:
A
V
key function
Allow*
0
Disallow
1
B
Position of decimal point (from right: tab)
0-3 (default: 2)
Example
Key operation
Print
02
@
V
A
From left, AB
48
■
Function parameters for
R
,
t
,
C
,
c
and
A
key function
ABC
A
To program “0” for all items
To program for another key
*
1
:Press
s
key for
A
key setting.
@
s
,
C
,
c
,
R
or
t
*
1
Item:
Selection:
Entry:
A
Footer printing*
2
Allow
1
Disallow*
0
B
Amount tendered entry*
2
Compulsory
1
Non-compulsory (for
C
and
A
)* 0
Inhibit (for
c
)*
0
C
Entry digit limit
For
C
,
c
and
A
0-8 (default: 8)
For
R
and
t
0-9 (default: 9)
*2: When programming for
R
or
t
, always enter 0 for item(A) and item(B)
Footer printing (only for
C
,
c
and
A
)
• This programming decides whether or not the machine should print a message at the foot of a receipt when
a specified media key is used. With regard to programming method of footer logo message, refer to “Logo
messages” section.
messages” section.
Amount tendered entry (only for
C
,
c
and
A
)
• You may select amount tendered, compulsory or optional, for the
C
, and
A
keys.
• You may select amount tendered, compulsory or inhibited, for the
c
key.
Entry digit limit
• For the
C
,
c
,
R
and
t
keys program upper limit entry amount for the tendered amount.
For the
A
key, program upper limit entry for total cash amount which can be handled on the register.
The entry digit limit is represented by the number of allowable digits for the maximum entry or total amount.
When “0” is set, the operation of the corresponding key is prohibited.
When “0” is set, the operation of the corresponding key is prohibited.
NOTE
This function is activated, when “HALO function; valid” (job code 62 on page 55) is programmed.
Example
Key operation
Print
018
@
C
A
From left, ABC
49
2
Other Text Programming
Please refer to “Guidance for text programming” on page 12 or “Entering character codes with numeric keys on
the keyboard” on page 43 as for how to entering characters.
the keyboard” on page 43 as for how to entering characters.
■
Foreign currency symbol
(4 characters)
Foreign currency symbol for the
V
key is printed with a foreign currency exchange amount obtained using a
preset rate.
Character entry
(max. 4 characters)
A
s
To keep the current setting
s
@
106
Example
Key operation
Print
s
106
@
US
S
036
:
s
A
Foreign currency
symbol
Entry using
character code
(U:0
, S:8
)
■
Domestic currency symbol
(4 characters)
“ ? ” is set as a default setting. When you want to change the domestic currency symbol, change the setting.
Character entry
(max. 4 characters)
A
s
To keep the current setting
s
85
@
Example
Key operation
Print
s
85
@
S
S
S
213
:
s
A
Domestic
currency symbol
Entry using
character code
50
■
Function text
(12 characters)
s
@
103
@
*Function no.
(max. 2 digits)
Character entry
(max. 12 characters)
A
To keep the current setting
s
To program another function text
* Function no.: See “List of function texts” shown on the following page.
Example
Key operation
Print
s
103
@
25
@
CARD
s
A
A
Programming “CARD” for credit
(C:2
(C:2
, A:0
, R:7
, D:3
)
Click on the first or last page to see other XE-A137 (serv.man3) service manuals if exist.