DOWNLOAD Sharp UP-800 (serv.man26) Service Manual ↓ Size: 724.52 KB | Pages: 62 in PDF or view online for FREE

Model
UP-800 (serv.man26)
Pages
62
Size
724.52 KB
Type
PDF
Document
Service Manual
Brand
Device
ECR / UP-800, UP-810 Program Manual
File
up-800-sm26.pdf
Date
PREV: Sharp UP-800 (serv.man25) Service Manual

Sharp UP-800 (serv.man26) Service Manual ▷ View online

UP-800F/810F (V)
SRV MODE PROGRAMMING (“SETTING”)
3 – 39
9. [09 SUPERVISOR]
DISPLAY: Setting item select screen
Select "09 SUPERVISOR" and press the ENTER key.
$
DISPLAY: Supervisor ON/OFF screen
Note:All modes can be accessed without cleak assignment when super-
riser mode is “on”.
10. [10 MEMORY INITIALIZE]
All of counter, totalizer and preset memory are initialized.
Except gt memory
11. [11 SSP]
The contents of item are shown in the table below.
12. [12 BACKUP SEND]
The contents of item are shown in the table below.
13. [13 BACKUP RECEIVE]
The contents of item are shown in the table below.
14. [14 CONTACTLESS KEY]
[PROGRAMMING]
CONTACTLESS KEY  
1) When this menu is selected, POS shows the message
“SET A KEY (DEFINE)” to define contactless key and waiting any
key is set.
2) If the contactless key is set, POS shows below programming menu
on screen.
3) If above programming menu is closed (by [TL]-key),
POS shows the programmed clerk code and name. 
4) If confirmation is OK, enter [TL]-key to register its key and clerk
code. If confirmation is NG, enter [CANSEL]-key to cancel the oper-
ation.
Note:
•  Any data for contactless clerk is not printed on printer.
In this job, the JOB header is only printed on journal printer.
•  If the key is set in the scene of a setting end, it sign on by the key. 
If the key is not set, it is the 'NOT ASSGIEND' error.
If it is the error, please cancel the error and set a key.
DISPLAY TEXT
SELECT ITEM
MRS
NOTE
SUPERVIS.
MODE
OFF
OFF
ON
CONTENTS
MEMORY INITIALIZE
DISPLAY TEXT
CONTENTS
SSP INPUT
SSP No. ENTRY
SSP EDIT
SSP No. ENTRY
SSP ALL CLEAR
YES/NO
SSP IND.CLEAR
SSP No. 
SETTING             
09 SUPERVISOR   
10 MEMORY INITIAL
11 SSP
12 BACKUP SEND
13 BACKUP RECEIVE
14 CONTACTLESS KEY
15 CLERK KEY DEL.
4
SUPERVISOR         
        
     
  SUPERVISOR MODE 
         
YES
4
[
࡮] KEY㧦Select YES/NO by toggle method.
ENTER KEY
㧦EXECUTE (DECISION) 
DISPLAY
CONTENTS
SELECT ITEM
MRS
SEND DATA
Send content
select
ALL RAM SSP
ALL RAM
SPEED
Communication 
speed setting
PROGRAMMED
PROGRAMMED
38, 400 bps
19, 200 bps
9, 600 bps
4, 800 bps
2, 400 bps
DISPLAY
CONTENTS
SELECT ITEM
MRS
SPEED
Communication
speed setting
PROGRAMMED
PROGRAMMED
38, 400 bps
19, 200 bps
9, 600 bps
4, 800 bps
2, 400 bps
Item
(Text)
Range/Detail
MRSdefault
Clerk code link CLERK CODE
4 digits (0001 to 9999)  Not defined
(Text)
Range/Detail
CLERK CODE Programmed code 4 digits(0001 to 9999) 
CLERK NAME Programmed clerk name for above clerk code
UP-800F/810F (V)
SRV MODE PROGRAMMING (“SETTING”)
3 – 40
[READING]
CONTACTLESS KEY
1) When this menu is selected, POS shows the message
“SET A KEY (CONFIRM)” to define contactless key and waiting any
key is set.
a) If any key is set, POS goes to Step  2).
b) If [CANSEL]-key is entered, POS finished this menu.
2) If the contactless key is set, POS shows the programmed clerk
code and name.
3) Enter [TL]-key or [CANSEL]-key.
If above key is entered POS goes to STEP  1).
Note:
•  This JOB is “DISPLAY” only function.
•  In this job, any information is not printed on journal printer.
15. [15 CLERK KEY DEL.]
[PROGRAMMING]
CLERK KEY DEL.
The key data is deleted by selected clerk code.
But the sign on key data isn't deleted.
OPERATION:
1) When this menu is selected, POS shows the clerk code input
window.
2) DELETE :Entry clerk code  & Push [ENTER] 
CANSEL : PUSH [CANSEL] 
Go to job end.
3) When entry clerk code & Push [ENTER]
4) When YES is selected, key data is deleted & go to job end. 
4’) When NO is selected, return to  1).
Print: When key data is deleted , Clerk code is printed on Journal.
(Text)
Range/Detail
CLERK CODE Programmed code 4 digits (0001 to 9999) 
CLERK NAME Programmed clerk name for above clerk code
(TEXT)
(RANGE)
CLERK CODE 0001-9999
(TEXT)
DETAIL
YES
Confirm
NO
Not confirm
UP-800F/810F (V)
SRV MODE PROGRAMMING (“3 IRC SET UP”)
4 – 1
CHAPTER 4. SRV MODE PROGRAMMING (“3 IRC SET UP”)
Before trying to perform inline setup, make sure to create (or delete) the
files required by the inline system using the following procedure: [SRV
MODE] - [2 SETTING] - [10 FILE]. And then perform inline setup.
DISPLAY: SRV mode screen
Select "3 IRC SET UP" and press the ENTER key.
 
$
DISPLAY: IRC SET UP item selection screen
Select the item and press the ENTER key.
 
$
The item setting input screen is displayed.
1. [1 TERMINAL SETTING]
DISPLAY: Setting item selection screen
Select the item to be changed and press the ENTER key.
The contents of setting are shown in the table below.
[1 SATELLITE]
DISPLAY: Setting screen
 
$
Select the item to be changed and press the ENTER key.
The setting content is described below.
*Regarding IP address 1-3, use the same address for all machines
(master, back-up master, and satellites) on the inline system.
*For IP address 4, enter the terminal No. on the inline system.
When all the machine are set, press the [TL] key.
The [IRC SET UP] screen appears to start the setup.
P UP
SRV MODE
SRV
E09
1  READING 
2  SETTING 
3  IRC SET UP 
4  DOWN LOAD 
5  DIAGNOSTIC 
6  PRINTER 
7  SD CARD MODE
PREV.
NEXT
LIST
P DOWN
P UP
IRC SET UP
SRV
1  TERMINAL SETTING 
2  IRC RESET
PREV.
NEXT
LIST
P DOWN
P UP
IRC SET UP
SRV
1  TERMINAL SETTING 
2  IRC RESET
PREV.
NEXT
LIST
P DOWN
DISPLAY TEXT
CONTENTS
SELECT ITEM
MRS
IP ADDRESS 1
192
IP ADDRESS 2
168
IP ADDRESS 3
000
IP ADDRESS 4
Terminal No.
001-254
000
CLERK
Clerk system
CENTRALIZED
CENTRALIZED
INDIVIDUAL
GLU
GLU system
CENTRALIZED
CENTRALIZED
INDIVIDUAL
OTHER SAVE
FILE
Other save file
EXIST
NOT
NOT
BACKUP
MASTER
Backup
master function
EXIST
NOT
NOT
P UP
TERMINAL SETTING
SRV
1  SATELLITE 
2  MASTER
3  BACKUP MASTER
4  STD. WITH IRC
5  STAND ALONE
PREV.
NEXT
LIST
P DOWN
P UP
SATELLITE
4
SRV
IP ADDRESS 1
IP ADDRESS 2 
IP ADDRESS 3 
IP ADDRESS 4
MWS PORT NO.
PLU/EAN TOTALIZER
PLU/EAN STOCK
CLERK
192 
168 
000 
000
 
49152 
CENTRALIZED
CENTRALIZED
CENTRALIZED
PREV.
NEXT
LIST
P DOWN
UP-800F/810F (V)
SRV MODE PROGRAMMING (“3 IRC SET UP”)
4 – 2
[2 MASTER]
DISPLAY: Setting screen
 
$
Select the item to be changed and press the ENTER key.
The setting content is described below.
* Regarding IP address 1-3, use the same address for all machines
(master, back-up master, and satellites) on the inline system.
* For IP address 4, enter the terminal No. on the inline system.
When all the machine are set, press the [TL] key.
The [IRC SET UP] screen appears to start the setup.
[3 BACKUP MASTER]
DISPLAY: Setting screen
 
$
Select the item to be changed and press the ENTER key.
The setting content is described below.
*Regarding IP address 1-3, use the same address for all machines
(master, back-up master, and satellites) on the inline system.
*For IP address 4, enter the terminal No. on the inline system.
When all the machine are set, press the [TL] key.
The [IRC SET UP] screen appears to start the setup.
DISPLAY TEXT
CONTENTS
SELECT ITEM
MRS
IP ADDRESS 1
192
IP ADDRESS 2
168
IP ADDRESS 3
000
IP ADDRESS 4
Terminal No.
001-254
000
CLERK
Clerk system
CENTRALIZED
CENTRALIZED
INDIVIDUAL
GLU
GLU system
CENTRALIZED
CENTRALIZED
INDIVIDUAL
OTHER SAVE
FILE
Other save file
EXIST
NOT
NOT
BACKUP
MASTER
Backup master
function
EXIST
NOT
NOT
P UP
TERMINAL SETTING
SRV
1  SATELLITE
2  MASTER
3  BACKUP MASTER
4  STD. WITH IRC
5  STAND ALONE
PREV.
NEXT
LIST
P DOWN
P UP
MASTER
4
SRV
IP ADDRESS 1
IP ADDRESS 2 
IP ADDRESS 3 
IP ADDRESS 4
MWS PORT NO.
PLU/EAN TOTALIZER
PLU/EAN STOCK
CLERK
PREV.
NEXT
LIST
P DOWN
192 
168 
000 
000
 
49152 
CENTRALIZED
CENTRALIZED
CENTRALIZED
DISPLAY TEXT
CONTENTS
SELECT ITEM
MRS
IP ADDRESS 1
192
IP ADDRESS 2
168
IP ADDRESS 3
000
IP ADDRESS 4
Terminal No.
001-254
000
CLERK
Clerk system
CENTRALIZED
CENTRALIZED
INDIVIDUAL
GLU
GLU system
CENTRALIZED
CENTRALIZED
INDIVIDUAL
OTHER SAVE
FILE
Other save file
EXIST
NOT
NOT
P UP
TERMINAL SETTING
SRV
1  SATELLITE
2  MASTER
3  BACKUP MASTER
4  STD. WITH IRC
5  STAND ALONE
PREV.
NEXT
LIST
P DOWN
P UP
BACKUP MASTER
4
SRV
IP ADDRESS 1
IP ADDRESS 2 
IP ADDRESS 3 
IP ADDRESS 4
MWS PORT NO.
PLU/EAN TOTALIZER
PLU/EAN STOCK
CLERK
PREV.
NEXT
LIST
P DOWN
192 
168 
000 
000
 
49152 
CENTRALIZED
CENTRALIZED
CENTRALIZED
Page of 62
Display

Click on the first or last page to see other UP-800 (serv.man26) service manuals if exist.

RANDOM: