Sharp ORDERMAN (serv.man6) Service Manual ▷ View online
Installation Manual
ORDERSOLUTION
- 9 -
8. Get the base data form the Host System
•
Connect the ORDERMAN® Base Station2 to the host
system to a free RS232 channel (using the correct
adapter; see also host system manuals).
system to a free RS232 channel (using the correct
adapter; see also host system manuals).
•
Check that the host system is in the normal
communication or order mode.
communication or order mode.
•
Restart the ORDERMAN® Don.
After the Power on, the ORDERMAN® Don displays
a status message for about two seconds.
If the ECR-Interface is not OK after 10 seconds
a status message for about two seconds.
If the ECR-Interface is not OK after 10 seconds
=> restart the ORDERMAN® Don
(see the figure on the right).
(see the figure on the right).
INFORMATION:
The ORDERSOLUTION now also supports automatic database updates to be triggered
The ORDERSOLUTION now also supports automatic database updates to be triggered
from the ECR. Please also refer to your ECR’s manual if the following steps are
necessary.
necessary.
ATTENTION:
Don’t press the Touch to start. During the configuration of your system a radio-
connection to the ORDERMAN Base Station2 is required. This is only guaranteed when
connection to the ORDERMAN Base Station2 is required. This is only guaranteed when
both OKs are received in the start window.
•
After the ORDERMAN® Don has booted select the SETUP button.
•
Enter the System Menu
Here you can also see the “Menu Card…”
and the “User Flags…” section. These are
secured by a password that can be changed
in the ORDERMAN® OSC software at the
“Text Translation Table” at text entry 399.
The default value is 2545 if the password is
activated in the “User Flags…”.
Installation Manual
ORDERSOLUTION
- 10 -
•
Enter the secret code 2545 (default)
This secret code can be changed in the ORDERMAN® OSC software at the “Text
This secret code can be changed in the ORDERMAN® OSC software at the “Text
Translation Table” at text entry 398.
•
Update Database
•
The ORDERMAN® Base Station2 starts loading the data from the host system.
Wait until the ORDERMAN® Don / MAX has finished
updating the data.
•
Exit the set up menu with the finished buttons.
ATTENTION:
Uploading data from the host system and synchronizing the ORDERMAN® Don / MAX
can take several minutes. It depends on the amount of data to load.
can take several minutes. It depends on the amount of data to load.
At the first time no MenuCard data is available and the ORDERMAN® Don / MAX stops
updating. => if this happens go on with the next step to configure the menu card.
updating. => if this happens go on with the next step to configure the menu card.
9. Configure your System
Here you can find a brief overview on the ORDERMAN® OSC software. For a detailed
description see online help of the ORDERMAN® OSC (by simply press the F1 key in the
ORDERMAN® OSC software).
description see online help of the ORDERMAN® OSC (by simply press the F1 key in the
ORDERMAN® OSC software).
•
Connect the ORDERMAN® Base Station2 to the PC with the PC connector
•
Start the ORDERMAN® OSC software
(the ORDERMAN® OSC software is part of the ORDERSOLUTION package and
can be started from the start menu after being installed).
can be started from the start menu after being installed).
Installation Manual
ORDERSOLUTION
- 11 -
•
Select File => New in the menu bar
or the New button in the tool bar.
•
If the program is started the first time or no settings for the serial port are
found a dialog is shown to select the port. Later you can change these settings
found a dialog is shown to select the port. Later you can change these settings
at the ComSettings via the Options Menu.
•
Import the MenuCard files
The needed files are created with the ORDERMAN® MenuCardDesigner.
To reach the next step both files have to be entered.
To reach the next step both files have to be entered.
Press OK.
•
Now the ORDERMAN® OSC starts uploading the data from the ORDERMAN®
Base Station2
Base Station2
Installation Manual
ORDERSOLUTION
- 12 -
If the uploading process doesn’t start after 30 seconds, check the used COM port and
try again.
try again.
•
Configure your system via PC
•
After the ECR Data is loaded the Menu tree is displayed.
•
The Text Translation Table
Here you can change the
messages displayed to the user.
If the User Message is not
defined, a Default Message is
displayed.
This can be used to translate the
application to different
This can be used to translate the
application to different
languages.
•
The PLU ScanCode assignment
Here you can assign items, groups, functions and cooking instructions to the scan
codes of the ORDERMAN® Don MenuCard by doing Drag & Drop.
codes of the ORDERMAN® Don MenuCard by doing Drag & Drop.
Click on the first or last page to see other ORDERMAN (serv.man6) service manuals if exist.