Sharp ORDERMAN (serv.man6) Service Manual ▷ View online
Installation Manual
ORDERSOLUTION
- 5 -
2. Requirements for using the ORDERSOLUTION
Hardware:
ORDERMAN® Base Station2
ORDERMAN® DSP-module.
ORDERMAN® Handhelds (e.g. Max or DON).
Host System supporting the ORDERMAN® ORDERSOLUTION.
Host System supporting the ORDERMAN® ORDERSOLUTION.
DSUB9 / Modular6 Adapter for host system connection (optional)
DSUB9 / Modular6 Adapter for PC
DSUB9 / Modular6 Adapter for PC
Cable for connecting the Modular6 Adapters
Software:
ORDERMAN® MenuCardDesigner
ORDERMAN® OSC (ORDERSOLUTION CONFIGURATOR)
3. Creating the MenuCard
The MenuCard (e.g. figure on the right) is part of
the ORDERMAN Don / MAX and can be configured
for your specific purpose.
Use the ORDERMAN® to create your MenuCard.
(Detailed description for using the ORDERMAN
the ORDERMAN Don / MAX and can be configured
for your specific purpose.
Use the ORDERMAN® to create your MenuCard.
(Detailed description for using the ORDERMAN
MenuCardDesigner see its online help)
A MenuCard consists of two files: *.bly and *.lay
file.
A MenuCard consists of two files: *.bly and *.lay
file.
The *.bly file contains the coordinates of the
buttons on the touch screen of the
ORDERMAN Don / MAX and the *.lay file holds the
scan codes and button texts.
The scan code is a number to identify a button in
the ORDERSOLUTION.
The button scan codes can be linked to the PLU
numbers of your items, groups, cooking instructions
or functions with the ORDERMAN® OSC software.
buttons on the touch screen of the
ORDERMAN Don / MAX and the *.lay file holds the
scan codes and button texts.
The scan code is a number to identify a button in
the ORDERSOLUTION.
The button scan codes can be linked to the PLU
numbers of your items, groups, cooking instructions
or functions with the ORDERMAN® OSC software.
Installation Manual
ORDERSOLUTION
- 6 -
4. Install the ORDERMAN DSP-module
Before starting assembling the ORDERMAN® DSP-module in the ORDERMAN® Base
Station2, you have to plug off the power supply unit.
Station2, you have to plug off the power supply unit.
After unscrewing the antenna loose the nut (both counter-clockwise).
Lift up the plastic cover, together with the plastic ring of the operating light indicator.
The next step is to remove the cover plate which is fixed by a screw.
antenna
nut
plastic cover
screwing point for the antenna
Operating light indicator
unscrew
Installation Manual
ORDERSOLUTION
- 7 -
Push in carefully the ORDERMAN® DSP-module into the ORDERMAN® Base
Station2 by using the guiding assembly.
Station2 by using the guiding assembly.
After attaching the cover plate onto the ORDERMAN® Base Station2 again, you can fix
the screw and mount the plastic cover with the plastic ring and finally the antenna.
guiding slots for the DSP-module
Installation Manual
ORDERSOLUTION
- 8 -
5. Prepare the ORDERMAN® Don / MAX for the
ORDERSOLUTION
•
Plug in the ORDERMAN Base Station2 power supply.
•
Press and hold down on any position in the touch area
Simultaneously, press down the On/Off button until “CALIBRATE…“ is displayed.
•
Release On/Off button and touch area.
•
Briefly press the On/Off button.
The ORDERMAN® Don / MAX is now in the set-up menu for the end user.
•
Touch the DON button on the toolbar.
•
Then press the On/Off button again briefly.
The ORDERMAN® Don / MAX is now in the set-up menu for dealers.
•
In order to initiate the update procedure, touch the update symbol on the
display.
•
The updating procedure is completed when “Finished” appears on the display.
6. Settings for the host system
Please have a look at your installation package for the settings of your host system or
contact your host system support.
7. Set baud rate for host / ecr communication
The default baud rate is 115200. If your host / ecr system uses a different baud rate you must
change this baud rate by using the ORDERSOLUTION Configuratior. Otherwise go on with
step 8.
a.) Connect the OMB2 to your PC which has the ORDERSOLUTION Configurator (OSC)
installed.
b.) Upload the configuration from the
change this baud rate by using the ORDERSOLUTION Configuratior. Otherwise go on with
step 8.
a.) Connect the OMB2 to your PC which has the ORDERSOLUTION Configurator (OSC)
installed.
b.) Upload the configuration from the
ORDERMAN® Base Station2 to the PC by using the
OSC.
c.) Select the “Flags View” and change the baud rate to the needed one.
d.) Download the new settings to the
c.) Select the “Flags View” and change the baud rate to the needed one.
d.) Download the new settings to the
ORDERMAN® Base Station2 and go on with step 8.
Click on the first or last page to see other ORDERMAN (serv.man6) service manuals if exist.