DOWNLOAD Sharp ER-A450 (serv.man5) Service Manual ↓ Size: 1.64 MB | Pages: 127 in PDF or view online for FREE

This section illustrates how to program items using job codes. Using job codes allows you to program a wide
variety of items in comparison with direct programming.

Start this programming by entering a corresponding job code as shown below.

All the items which can be programmed by the job-code-based programming are listed on this page and the
following, and those which can also be programmed by the direct programming are marked with the symbol 
“ 

” that follows job codes.

When setting the parameters for a job code, the digit that is blinking is the one that can be changed.
To go to the position of the parameter that you want to change, press either of the following keys :

.

 

Moves the blinker to the right.

º

 

Moves the blinker to the left.

Enter day (one or two digits), month (two digits), and year (two digits) in this sequence.

Date

2610 

. ≈

260898 

;

2610

.

≈

;

Date (five or six digits)

1

2110

.

≈

Set the time using the 24-hour format.  For example, when the time is set to 2:30 AM, enter 230; and when it is
set to 2:30 PM, enter 1430.

2611

.

≈

;

Time (max. four digits)

When your store has two or more registers, it is practical to set separate register numbers for their identification.
You may set them in a maximum of six digits.

Register number

2612 

. ≈

123456 

;

2612

.

≈

;

Register number 

(one to six digits)

To set the register number “0”

2

Time

2611 

. ≈

1430 

;

The consecutive number is increased by one each time a receipt is issued.
Enter a number (one to four digits) that is one less than the desired starting number.

.

≈

2613

;

A number (one to four digits) that is one 

less than the desired starting number

To begin the count from 0001

Consecutive 
number

2613 

. ≈

1000 

;

*A: Enter a corresponding tax rate number. For example, when you program a tax rate as tax rate 1, enter 1

and when you program it as tax rate 6, enter 6.

**

Sign and tax rate: XYYY.YYYY

• The lowest taxable amount is valid only when you select add on tax system. If you select VAT

(Value added system), it is ignored.

• If you make an incorrect entry before pressing the third 

≈

key in programming a tax rate, cancel

it with the 

c

key; and if you make an error after pressing the third 

≈

key, cancel it with the 

:

key.  Then program again from the beginning correctly.

• If you select VAT system, the sign which you program is ignored.

Lowest taxable
amount

Tax rate 2

Tax rate : 4%

2711 

. ≈

2 

≈

4 

≈

12 

;

2711

*

A

.

≈

≈

≈

;

:

When the lowest taxable amount is zero

To delete

max. five digits: 
0.00 to 999.99

1 to 6

Lowest taxable

amount

**Sign and

tax rate

3

Tax rate= 0.0001 to 100.0000

Sign 

-

/

+ 

= 

1

/

0

Your machine is equipped with 20 standard departments and up to 50 optional departments. 
Your machine allows you to perform the following programming for each department:

You can set each department for:

• SICS

If the first registration is to a department set for SICS, the sale is finalized as soon as the department key is
pressed. If the sale is preceded by registrations to departments not set for SICS, a sale to a department set
for SICS does not finalize and can be repeated until the 

;

key is pressed.

• SIF

Whenever a sale is made to a department set for SIF, the sale is finalized as soon as the department key is
pressed.

You may select one of the following four types of unit price entry for each department. 
• Open and preset
• Preset only
• Open only
• Inhibit department key

4

A to D

Always enter 0.

0

SIF/SICS /Normal

SIF

2

SICS

1

Normal

0

Always enter 0.

0

Type of unit price entry

Open and preset

3

Preset only

2

Open only

1

Inhibit department key

0

2110

.

≈

≈

:

;

c

Dept. code

* A B C D E F G

To program for the dept. other than the following dept.

To keep the current setting

To program for the following dept.

The current

setting 

is displayed.