Sharp ER-A450 (serv.man5) User Manual / Operation Manual ▷ View online
15
PROGRAMMING
Your machine allows you to program in two modes: PGM1 and PGM2. The PGM1 mode is for programming
those items that need to be changed often: unit prices of departments/PLUs, and percentages. The PGM2
mode is used for programming all PGM1-mode programs and those items that require less frequent changes:
date, time, tax rate, and the functions of each key. We describe below the programming or setting procedures of
various items.
Program every item necessary for your store following the appropriate procedures.
those items that need to be changed often: unit prices of departments/PLUs, and percentages. The PGM2
mode is used for programming all PGM1-mode programs and those items that require less frequent changes:
date, time, tax rate, and the functions of each key. We describe below the programming or setting procedures of
various items.
Program every item necessary for your store following the appropriate procedures.
* To set the mode switch to the PGM1 position, use the manager or submanager key; and to set to the PGM2
position, use the manager key.
Preparations for Programming
1.
Plug your machine into a standard wall outlet.
2.
Put the manager or submanager key in the mode switch and turn it to the PGM1 or PGM2 position
depending upon the programming you are about to do.
depending upon the programming you are about to do.
3.
Check to see whether both journal and receipt rolls are present in the machine. If they are missing, install
journal and receipt paper rolls correctly referring to the procedure in “4. Installing and removing the paper
roll” under “OPERATOR MAINTENANCE”.
journal and receipt paper rolls correctly referring to the procedure in “4. Installing and removing the paper
roll” under “OPERATOR MAINTENANCE”.
4.
Program necessary items into your machine.
Direct Programming
Date
Enter the day (one or two digits), month (two digits), and year (two digits) in this sequence.
26 August, 1998
Date
260898
=
Print
Key operation
Example
=
Date (five or six digits)
X X X X X X
Procedure
PGM 2
Setting the date and time
1
16
Time
Set the time using the 24-hour format. For example, when the time is set to 2:30 AM, enter 230; and when it is
set to 2:30 PM, enter 1430. Once you set the time, the internal clock unit will continue to run as long as the
built-in battery is alive and update the date (day, month, year) properly.
set to 2:30 PM, enter 1430. Once you set the time, the internal clock unit will continue to run as long as the
built-in battery is alive and update the date (day, month, year) properly.
Setting the time as 2:30 PM (14:30)
Your machine is equipped with 20 standard departments and up to 50 optional departments.
Your machine allows you to perform the following programming for each department:
Your machine allows you to perform the following programming for each department:
Unit price
* Unit price: max. six digits (9999.99)
Programming the unit price 10.00 for department 1
1.
Press the department 1 key.
1
• The current unit price will be displayed.
2.
Enter the unit price “1000.”
1000
3.
Press the
:
key to program this setting.
:
4.
Press the
;
key to finalize the programming
and generate a programming report.
;
0 . 0 0
0 2 0 . 0 0
0 1 1 0 0 0
0 1 0 . 0 0
Example
:
;
Unit price
*
Department
key
key
To keep the current setting
To program for the following dept.
To program for another dept.
Procedure
PGM 2
PGM 1
Programming for departments
2
Time
1430
=
Print
Key operation
Example
=
Time (max. four digits)
X X X X
Procedure
PGM 2
17
Functional selection
* Item:
Selection:
Entry:
A
Always enter 0.
0
B
VAT6 or TAX6
No
0
Yes
1
C
VAT5 or TAX5
No
0
Yes
1
D
VAT4 or TAX4
No
0
Yes
1
E
VAT3 or TAX3
No
0
Yes
1
F
VAT2 or TAX2
No
0
Yes
1
G
VAT1 or TAX1
No
0
Yes
1
H
Normal/SICS (Single Item Cash Sale)/ Normal
0
SIF (Single Item Finalization)
SICS
1
SIF
2
I
Significant digit for HALO
1 through 9
J
Number of zeros to follow the significant digit for HALO
0 through 7
Tax status
• The tax system of your machine has been factory–set to automatic VAT1–6. If you desire to
• The tax system of your machine has been factory–set to automatic VAT1–6. If you desire to
select any of automatic tax 1–6, manual VAT1–6, manual VAT1, manual tax 1–6, and the
combination of the automatic VAT 1–3 and the automatic tax 4–6, consult your dealer.
combination of the automatic VAT 1–3 and the automatic tax 4–6, consult your dealer.
• When the combination of the automatic VAT1–3 and automatic tax 4–6 system is selected, one of
the VAT1(G), VAT2(F) and VAT3(E) can be selected in combination with tax 4–6.
Example: BCDEFG= 100100, 110100, 111010
Example: BCDEFG= 100100, 110100, 111010
Note
≈
;
c
Department
key
key
Department
key
key
*A B C D E F G H I J
To keep the current setting
To program for the following dept.
To program for another dept.
Department
key
key
Procedure
PGM 2
Unit price
Dept. code
Print
18
Normal department/SICS (Single Item Cash Sale) / SIF (Single Item Finalization)
• If an entry of a department programmed for SICS is made first, the sale will be finalized as soon
• If an entry of a department programmed for SICS is made first, the sale will be finalized as soon
as the department key is pressed. If the entry is made after entering a department not
programmed for SICS, the sale will not be finalized until the
programmed for SICS, the sale will not be finalized until the
;
key is pressed.
• Whenever a sale is made to a department set for SIF, the sale is finalized as soon as the
department key is pressed.
HALO (High Amount Lockout)
• You can set an upper limit amount (HALO) for each department. The limit is effective for the
• You can set an upper limit amount (HALO) for each department. The limit is effective for the
REG-mode operations and can be overridden in the MGR mode.
• IJ is the same as I x 10
J
.
For example, presetting 14 (100.00) here means that amount entries of up to 100.00 are allowed
in the REG mode. When you preset 17, however, the upper limit amount is 99999.99.
in the REG mode. When you preset 17, however, the upper limit amount is 99999.99.
Programming for department 4 as follows: A=0, B=0, C=0, D=0, E=0, F=0, G=1, H=0, I=9 and
J=5
J=5
1.
Press the department 4 key twice.
4 4
• The current parameter setting will be displayed.
2.
Set the parameters as follows:
• You can change the value at the blinker.
• You can change the value at the blinker.
Go to the desired position with the following keys:
.
.......Moves the blinker to the right.
➞
º
.......Moves the blinker to the left.
➞
• Enter the figure.
0000001095
3.
Press the
≈
key to program this setting.
≈
4.
Press the
;
key to finalize the programming
and generate a programming report.
;
Taxable 1
Normal dept.
HALO limit
Print
0 . 0 0
0 0 0 0 0 0 0 0 1 7
0 0 0 0 0 0 1 0 9 5
0 0 0 0 0 0 0 0 1 7
0 0 0 0 0 0 0 0 1 7
0 0 0 0 0 0 0 0 1 7
0 0 0 0 0 0 0 0 1 7
0 0 0 0 0 0 0 0 1 7
A B C D E F G H I J
Example
Click on the first or last page to see other ER-A450 (serv.man5) service manuals if exist.