DOWNLOAD Sharp DV-740 (serv.man21) Service Manual ↓ Size: 3.1 MB | Pages: 36 in PDF or view online for FREE

 

- 19 -     

<

 

There are four available selections: ANGLE MARK, OSD 
LANG, CAPTIONS, and SCR SAVER. 

l

  ANGLE MARK  

During playback of a title with multiple angle sections, 
the message " 

" will appear on the upper corner of 

the screen. 

?

 

When ANGLE MARK is set to "ON", the angle mark 

OSD will stay on the screen until the end of the 
playback title or chapter. 

?

 

When ANGLE MARK is set to "OFF", the angle mark 

OSD will stay on the screen for 3 sec and then 
disappear. 

 
 
 
 
 
 
 
 
 
 

l

  OSD LANGUAGE 

You can select the language for the setup menu or the 
operation message display. There are six available 
OSD languages: ENGLISH, FRENCH, SPANISH, 
ITALIAN, SWEDISH and GERMAN for display.  

 
 
 
 
 
 
 
 
 
 
 

l

  CAPTIONS  

Closed Caption (CC) is a standardized method of 
encoding text into an NTSC television signal. A TV can 
display the text with a built-in decoder. Closed Caption 
can be carried on DVD. If a DVD title contains a  CC 
mark on the rear of the box, then you can set Captions 
to “ON” and read written captions on the TV screen. 
Default is set to “OFF”. 

 
 
 
 
 
 
 
 
 
 

l

  SCREEN SAVER 

When this DVD player is idle (after about 5 minutes of 
inactivity), the screen saver can be activated to prolong 
the TV monitor’s life. 

 
 
 
 
 
 
 
 
 
 

NOTES: 

i

  Caution: The DVD player can hold a still video image or OSD image 

on your television screen indefinitely. If you leave the still video 

image or OSD image displayed on your TV for a very long time. It 

may cause the permanent damage to your TV screen. 

 

- 20 -     

<

 

Preferences allow you to set the default AUDIO, SUBTITLE, 
DISC MENU, PARENTAL, PASSWORD, and factory 
DEFAULTS of this player. This setting is only available 
when the DVD player is in the STOP mode by pressing the 

 button twice. 

NOTES 

i

  Pressing the 

 button once only pause the playback. You must 

press the 

 button 

twice

 to stop the playback.  

l

  AUDIO 

This unit supports six audio selections, as shown below, 
for your preferred audio setting. 

 

 
 
 
 
 
 
 
 
 

l

  SUBTITLE  

This unit supports six subtitle selections, as shown 
below, for your preferred default subtitle setting.  When 
“OFF” is selected, there will be no subtitle is displayed 
during playback. 

 
 
 
 
 
 
 
 
 
 
 
 

l

  DISC MENU 

This unit supports six DISC MENU languages. 

 
 
 
 
 
 
 
 
 
 
 
 

l

  PARENTAL 

Functions to limit the playback of some discs that 
contain mature scenes. The limitation varies from disc 
to disc; when it is activated, playback is completely 
prohibited. There are eight levels of parental setting of 
this unit. 
 

 
 
 
 
 
 
 
 
 

When you want to change the parental rating level, you 
will be asked to enter a password.  

 

 

 

 

 

 

 

NOTES: 

i

  Use “3308” to override the forgotten password and re-enter a new 

password. 

 

- 21 -     

l

  PASSWORD  

The password is a 4-digit number. When you want to 
change the password, select “CHANGE” as shown 
below.  

 
 
 
 
 
 
 
 
 
 
You will be asked to enter the old password, then enter the 
new password, and confirm it. 
 
 
 
 
 
 
 
 
 
 

NOTES: 

i

  The default password number is”3308”.

 

l

  DEFAULTS 

When you select “RESET”, all the initial settings will be 
restored to the default setting. 

 
 
 
 
 
 
 
 
 
 
 
 
 

 

- 22 -     

<

 

There are two OSD display modes available when playing 
a DVD disc.  

l

 

Mode 1 

 

Shows the status of the pressed button and some special 
messages are displayed on the screen. For example, 
when the 

button is pressed, the OSD shows:

 

 
 
 
 
 
 
 

l

  Mode 2  

Shows the playback information of a movie or title. 

?

 

When pressing the 

 button on R/C, the 

information OSD will display on the screen in the 
sequence as shown below:

 

 
 
 
 
 
 
 

 
 
 
 
 
 
 

?

 

When pressing the 

 button on the remote 

control again, it will turn off the OSD.

 

<

 

There are two OSD display modes available when playing 
a VCD, and Audio CD disc.  

l

 

Mode 1 

 

Shows the status of the pressed button and some special 
messages are displayed on the screen as previous 
description.  

l

  Mode 2  

Shows the playback time information of a disc. 

?

 

When pressing the 

 button on R/C, the 

information OSD will display on the screen in the 
sequence as shown below:

 

 
 
 
 
 
 
 
PBC OFF or Audio CD playback: 

 
 
 
 
 
 
 

 
 
 
 
 
 
 

?

 

When pressing the 

 button on the remote 

control again, it will turn off the OSD.

 

 

³

³