Sharp DV-740 (serv.man21) User Manual / Operation Manual ▷ View online
- 23 -
BASIC OPERATION OF PLAYBACK
Preparation:
?
If a television set is used, turn on its power and select the appropriate input AV, S-Video or SCART. If the SCART
connection is used then the TV will switch to the correct input when the DVD player is turned on.
connection is used then the TV will switch to the correct input when the DVD player is turned on.
?
If a sound system is used, turn on the amplifier first and make sure its outputs are set properly.
<
START Playback
1.
Press the
OPERATE
button to turn on the DVD player.
2.
Press the
OPEN/CLOSE
button to open the disc tray.
3.
Place a disc onto the tray and make sure that it is
placed squarely on the tray.
placed squarely on the tray.
4. Press the
OPEN/CLOSE
or
ENT/PLAY
button to play the
disc.
NOTES:
i
When using a DVD disc, some menu selections and some DVD
playback functions are available during playback.
i
When using a VCD disc with PBC, the PBC menu will be displayed
on the screen. You can use the PBC menu, or press the PBC button
to set PBC off and the disc will play immediately.
i
For a VCD disc without PBC or an Audio CD, the disc will be played
immediately.
<
SKIP Playback
l
DVD Playback
?
Press the
SKIP
:
button to skip to the next chapter.
Before press
SKIP:
button
After press
SKIP:
button
?
Press the
9
SKIP
button to skip to the beginning of the
current chapter or previous chapter.
Before press
9
SKIP
button
After press
9
SKIP
button
l
VCD/Audio CD Playback
?
PBC ON (VCD 2.0 above only):
Press the
SKIP
:
or 9
SKIP
button will go back to the
PBC menu.
PLAYING
VCD PBC MENU
Note:
i
There will be a case that playback stops when
SKIP:
or
9
SKIP
is pressed.
?
PBC OFF or Audio CD
Press the
SKIP
:
or 9
SKIP
button will skip to the
next or previous track of VCD or Audio CD.
Note:
i
PBC: Play Back Control. See page 29.
This function is only available for Video-CD version 2.0 or higher.
The PBC operation may differ by disc, therefore, refer to the
instructions for each disc.
<
STILL/PAUSE Playback
Step playback is available while playing discs other than
Audio CD. It provides a frame-by-frame still picture image.
Audio CD. It provides a frame-by-frame still picture image.
?
Press the
STILL/PAUSE
button to freeze the image.
Press the
STILL/PAUSE
button again to skip to the next
frame, and so on.
?
Press the
ENT/PLAY
button to return to normal play.
Frame 1
Frame 2
TITLE 002/04 CHAPTER
01
/09
TITLE 002/04 CHAPTER
02
/09
TITLE 002/04 CHAPTER
02
/09
TITLE 002/04 CHAPTER
01
/09
9
:
;
;
Song 1
Song 2
Song 3
Song 4
Song 5
Song 6
Song 2
Song 3
Song 4
Song 5
Song 6
- 24 -
<
FAST FORWARD/REVERSE SCAN
Using the
FWD
8
and 7
REV
buttons to fast forward and
reverse scan.
l
DVD Playback
?
When the
FWD
8
or 7
REV
button is pressed, the
speed of playback changes in cycles of
2à 4à 6à
8à Playà 2
8
2
8
8
7
2
7
8
?
When the
ENT/PLAY
button is pressed during fast
forward/reverse scan, normal playback will be
resumed.
resumed.
l
VCD/Audio CD Playback
?
When the
FWD
8
or 7
REV
button is pressed, the
speed of playback changes in cycles of 1à 2à 3à
4à Playà 1.
4à Playà 1.
8
1
8
4
?
When the
ENT/PLAY
button is pressed during fast
forward/reverse scan, normal playback will be
resumed.
resumed.
NOTES:
i
It is normal that video image may seem discontinuous during fast
forward/reverse scan.
i
When the fast forward scan reaches the end of a track (Audio
CD/VCD) or a title (DVD), normal playback of the next track/title will
be resumed.
i
When the fast reverse scan reaches the beginning of a track (Audio
CD/VCD) or a title (DVD), the normal playback of the track/title will
be resumed.
<
SLOW-MOTION Playback
l
DVD Playback
?
When the
SLOW
button is pressed, the speed of
playback changes in cycles of slow forward 2à
4à 8 and then slow reverse
2à
4à
8.
2
8
2
8
?
When the
ENT/PLAY
button is pressed during slow
forward/reverse scan, normal playback will be
resumed.
resumed.
l
VCD Playback
?
When the
SLOW
button is pressed, the speed of
playback changes in cycles of slow forward
1à
2à
3 à PLAYà
1.
1
3
?
When the
ENT/PLAY
button is pressed during slow
forward/reverse scan, normal playback will be
resumed.
resumed.
NOTES:
i
During slow-motion play, you will not be able to hear the audio
portion of the track.
8
2
8
8
2
8
3
8
1
8
4
2
8
Slow Forward
Slow Reverse
Slow Forward
Fast Forward
Fast Forward
7
2
7
8
Fast Reverse
1
- 25 -
<
STOP Playback
l
DVD Playback
Pressing the
STOP
button once pre-stops (pauses)
playback. You must press the
STOP
button twice to totally
stop the playback.
PLAYING
PRE-STOP
STOP
RESUME
PLAY
STOP
STOP
NOTES
i
When the unit is not in use, please remove the disc and press the
OPERATE
button to turn off DVD player.
l
VCD/Audio CD Playback
?
PBC ON (VCD 2.0 above only):
Press
STOP
button will go back to PBC Menu.
PLAYING
VCD PBC MENU
Note:
i
Some function keys will be differed from its original definition even
cease to function in some discs. The main cause is those specific
discs were already contained its operation function in process of
manufacturing. In this case, to operate the function key, please follow
on-screen indication for operation. The particular feature only exists
in those specific discs; it will not further affect DVD player’s normal
operation.
i
When PBC mode is ON, even when STOP button is pressed some
discs will not go back to PBC Menu and
is shown on the
screen.
?
PBC OFF or Audio CD
Press
STOP
button will stop playback during PBC off or
Audio CD playback..
PLAYING (VCD)
STOP
PLAYING (Audio CD)
STOP
PRESS PLAY TO CONTINUE
4
<
Press the STOP button
ONCE will Pre-stop
playback.
ONCE will Pre-stop
playback.
Press the STOP button
TWICE will totally stop
playback.
TWICE will totally stop
playback.
Press the ENT/PLAY
button will resume
playback.
button will resume
playback.
Song 1
Song 2
Song 3
Song 4
Song 5
Song 6
Song 2
Song 3
Song 4
Song 5
Song 6
<
<
- 26 -
ADVANCED OPERATION OF PLAYBACK
<
REPEATED Playback
l
TITLE/CHAPTER Repeat
When the
REPEAT
button is pressed, the repeated
playback is triggered and the OSD message is
changed in cycles of “CHAPTER REPEAT ON”,
“TITLE REPEAT ON”, and “REPEAT OFF.”
changed in cycles of “CHAPTER REPEAT ON”,
“TITLE REPEAT ON”, and “REPEAT OFF.”
?
CHAPTER REPEAT
Enables the repeated playback of a chapter for a DVD
disc or track for a Audio CD disc or a VCD disc.
disc or track for a Audio CD disc or a VCD disc.
?
TITLE REPEAT
Enables the repeated playback of a title for a DVD disc
or a disc for a Audio CD disc or a VCD disc.
or a disc for a Audio CD disc or a VCD disc.
?
REPEAT OFF
Resumes normal play.
l
A-B Repeat
You are able to perform a repeated playback between
any two points of a track or a chapter.
any two points of a track or a chapter.
1. Press the
A-B REPEAT
button during playback to set the
beginning point (A). The OSD message “A TO B SET
A “ will be shown on the right lower screen corner.
A “ will be shown on the right lower screen corner.
2. Press the
A-B REPEAT
button again to set the end point
(B). The OSD message “A TO B SET B ” will be shown.
In the meantime, the repeated playback begins
between the two points, A and B.
In the meantime, the repeated playback begins
between the two points, A and B.
3. Pressing the
A-B REPEAT
button again resumes normal
play. The OSD message “A TO B CANCELLED” will
be shown.
be shown.
SET A
SET B
<
PROGRAM Playback
Here the program playback function is only available for
Audio CD, or a VCD with PBC off.
Audio CD, or a VCD with PBC off.
l
Track Program
1. Press the
PROGRAM
button to program the tracks for
program playback during STOP status.
2. Use the numbers on the remote control to begin
programming. Press the corresponding track number
in the same sequence as your desired playback order.
in the same sequence as your desired playback order.
For example:
To program tracks 2, 4, 6 (in the same order), simply
press key digits
press key digits
2
, digit
4
, digit
6
sequentially.
Set track 2 as first sequence
Set track 4 as second sequence
?
A number larger than 10 must be keyed by using
+10
additionally. For example, “22” is keyed in by pressing
+10
twice and then
2
once.
NOTES:
i
The maximum program capability is 99 tracks.
l
Start/Cancel the Program Playback
?
Press the
PLAY
button to start the program playback in
the order that you programmed it.
?
Press the
STOP
button to stop playback, press
PROGRAM
to
reset program order, press
PROGRAM
again to cancel the program function.
?
During the program playback, the
SKIP
:
button and
the 9
SKIP
button can be used to advance to the next
programmed track or go back to the previous
programmed track.
programmed track.
CHAPTER REPEAT ON
TITLE REPEAT ON
A TO B SET A
A TO B SET B
PROGRAM P01: 02
PROGRAM P02: 04
PROGRAM P00: 00
Click on the first or last page to see other DV-740 (serv.man21) service manuals if exist.