DOWNLOAD Sharp DV-620 (serv.man15) Service Manual ↓ Size: 2.56 MB | Pages: 75 in PDF or view online for FREE

■ Digital Connection

DIGITAL  IN

OPTICAL

COAXIAL

DIGITAL

OUT

OPTICAL

DIGITAL OUT

AV OUT

VIDEO

S-VIDEO

RGB

S-VIDEO

OUT

OUTPUT

SELECTOR

VIDEO

OUT

AUDIO

OUT

L

R

Coaxial digital cable (commercially available)

Optical digital cable (commercially available)

or

You can make this connection
using either a coaxial digital
cable or an optical digital cable.

To coaxial
DIGITAL OUT jack

To OPTICAL 
DIGITAL OUT
jack

or

To coaxial
digital input jack

To optical
digital input
jack

Optical digital cable 
(commercially available)

Coaxial digital cable 
(commercially available)

Audio equipment with
optical/coaxial digital input jack

Some Audio CDs and VIDEO CDs have a short silent section between musical tracks. When sound from discs
such as these is digitally recorded by connecting the Player directly to a digital recorder (such as an MD player),
the music may be recorded continuously and track numbers may be lost.

■ Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder
• Audio CD or VIDEO CD

Play the disc as you normally would, with the audio mode set to “L+R” (see page 65). With a digital
connection, audio of a disc recorded with DTS sounds abnormal in this case.

• DVD

With a digital connection, audio cannot be produced from a DVD recorded with Dolby Digital (5.1 channel),
Dolby Surround (Pro Logic), DTS or MPEG Audio, so you should use an analogue connection to play such
discs. Discs with linear PCM audio should play normally.

Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround processor or a Dolby Digital/
DTS/MPEG Audio surround processor to your Player’s optical/coaxial digital jack provides richer and more
powerful audio play.

• This connection is not possible if the processor or amplifier to which you want to connect does not have an optical/

coaxial digital input jack.

■ Connection to a processor or amplifier with an optical/coaxial digital input jack

DIGITAL  IN

OPTICAL

COAXIAL

S-VIDEO

OUT

OUTPUT

SELECTOR

VIDEO

OUT

AUDIO

OUT

L

R

DIGITAL

OUT

OPTICAL

DIGITAL OUT

AV OUT

VIDEO

S-VIDEO

RGB

Coaxial digital cable (commercially available)

Optical digital cable (commercially available)

or

To coaxial
DIGITAL OUT jack

To OPTICAL 
DIGITAL OUT
jack

To coaxial
digital input jack

To optical
digital input
jack

Coaxial digital cable 
(commercially available)

Optical digital cable 
(commercially available)

Dolby Digital (5.1ch)/
DTS/MPEG Audio processor or amplifier

You can make this connection
using either a coaxial digital
cable or an optical digital cable.

or

Turn on the TV and select the “VIDEO” or “AV” mode.

Switch the Player on by pressing OPERATE.
• The startup screen shown below appears on the TV screen.

This Player has these two working modes.
When turning off the Player, it goes in the Standby mode.
When turning it on, it goes in the Active mode.

These two modes work as shown on the following table.

Front Panel

STANDBY

VIDEO

Pick up

Display

LED indicator Output signal

activity

Active

On

Off

On

On

mode

Standby

Off

On

Off

Off

mode

• In the Active mode, all functions are available.

• In the Standby mode, you can change to the Active mode by

pressing OPERATE or î OPEN/CLOSE.

Press OPERATE to turn off the Player which is in the Active mode. At
this time, the STANDBY LED indicator on the Player lights and the
Player goes in the Standby mode.

• If the Player is stopped and not used in any way for 5 minutes,

“SHARP DVD VIDEO PLAYER” appears on the Player’s front
panel display.

• After another 25 minutes of non-operation, the STANDBY LED

indicator lights and the Player enters the Standby mode
automatically.

• In the Standby mode, all buttons are disabled, except for

î OPEN/CLOSE and OPERATE.

Startup Screen

OPEN/

CLOSE

OPERATE

DISPLAY

DIMMER

SETUP

ZOOM

ON

SCREEN

AUDIO

TITLE

MENU

VIRTUAL

FUNCTION

CONTROL

SUBTITLE

ANGLE

RETURN

REV

FWD

ENTER

REPEAT

A B REPEAT

PROGRAM

DIRECT

CLEAR

MEMORY

PAUSE

RESUME

SLOW

F.ADV

SLOW

STILL

DVD VIDEO PLAYER

SKIP

SKIP

PLAY

STOP

OPERATE

STANDBY

This section describes how to specify various basic settings using the
SETUP screen. The list below shows all the items you can set and
adjust. See the following pages for details on each setup procedure.
• The setting procedures described on the following pages are

available only in stop mode.

• The OSD (On Screen Display) screens used in this Operation

Manual are purely for the purposes of explanation. The actual
screens may differ slightly from what is shown here.

(Example) TV MODE SETUP

• Use this setting for increasing the average volume

of Dolby Digital audio when playing a DVD.

• Use this setting for specifying either “BITSTREAM” 

or “D-PCM”/“PCM” as the digital type output.

• Use this setting for selecting languages of

subtitle, audio track and disc menu recorded on 
a disc.

• Use this setting for selecting OSD languages.

TV MODE SETUP 

PARENTAL SETUP [1 to 8 (ON)/OFF] 

AUDIO SETUP

DISC LANGUAGE

OSD LANGUAGE SETUP

COMPRESSION [ON/OFF]

SUBTITLE

DIGITAL

AUDIO

TV MODE

NTSC

MENU

NTSC

NTSC

→PAL

Languages you 
can select are 
same as above.

Languages you 
can select are 
same as above.

4 : 3

16 : 9

 

LB

PS

4 : 3

BITSTREAM

D-PCM

MPEG

BITSTREAM

PCM

• Specifies the setting for the type of TV connected

and the playback format for wide-screen video 
material.

• Used to specify the colour system in accordance

with the TV connected when playing back an 
NTSC disc.

• Sets or changes the parental level (1 to 8).

• Sets the password used to prevent the parental

level from being changed too easily.

ENGLISH
FRANÇAIS

DEUTSCH
ITALIANO
ESPAÑOL

SVENSKA
NEDERLANDS

ENGLISH
FRENCH

GERMAN
ITALIAN
SPANISH

JAPANESE
SWEDISH
DUTCH
OTHER

 TV MODE SETUP        

    TV MODE:     
    NTSC:      NTSC

→PAL

• Numbers in          refer to the pages where the setting

procedures are described.