Sharp DV-600H (serv.man5) User Manual / Operation Manual ▷ View online
11
GB
Remote Control Unit of Your DVD Player
u SKIP button (À/à)
(Reverse/Forward)
(see page 25)
(see page 25)
i STILL/PAUSE (â) button
(see page 22)
o SLOW button ( )
(see page 23)
p FWD (è) button
(see page 24)
a REV (È) button
(see page 24)
s RESUME button
(see page 23)
d STOP (Ë) button
(see page 16)
f PLAY (û) button
(see page 22)
g CLEAR (C) button
(see page 16)
h Number buttons
(see page 16)
j RETURN (
) button
(see page 16)
k TITLE button
(see page 30)
l SUBTITLE ON/OFF button
(see page 40)
; SUBTITLE (
) button
(see page 40)
SETUP button
(see page 15)
(see page 15)
VIRTUAL button
(see page 45)
(see page 45)
DIMMER Feature
Use this button to set the front panel display brightness to Bright or Dark.
Inserting the Batteries
First, install the batteries properly. Fit two R6 (UM/SUM-3 or AA) 1.5 volt
batteries (included) or equivalent.
If the remote control stops working, insert new batteries.
Ensure the batteries are inserted correctly, matching the polarities (
batteries (included) or equivalent.
If the remote control stops working, insert new batteries.
Ensure the batteries are inserted correctly, matching the polarities (
/
)
indicated in the remote control.
• Do not subject the remote control to shock, water or excessive humidity.
• The remote control may not function if the DVD Player sensor is in direct
sunlight or any other strong light.
• Incorrect use of batteries may cause them to leak or burst. Read the battery
warnings and use the batteries properly.
• Do not mix old and new batteries, or mix brands in use.
• Remove the batteries if you will not use the remote control for an extended
period of time.
OPEN/
CLOSE
DIMMER
DIGITAL
GAMMA
DIGITAL
S.PICTURE
PICTURE
NEUTRAL
VIRTUAL
DISPLAY
AUDIO
TITLE
SKIP
SKIP
MENU
SETUP
SUBTITLE
ON/OFF
SUBTITLE
ANGLE
ENTER
REPEAT
A B REPEAT
PROGRAM
DIRECT
PAUSE
CLEAR
RESUME
MEMORY
RETURN
SLOW
REV
FWD
M
C
PLAY
STOP
STILL
5
6
7
8
9
0
q
w
e
r
t
y
6
7
8
9
0
q
w
e
r
t
y
u
u
o
p
a
s
d
f
g
h
j
k
l
;
z
x
i
4
1 2
3
1 OPEN/CLOSE (î) button
(see page 21)
2 DIMMER button
(see “DIMMER Feature” below)
3 DIGITAL GAMMA button
(see page 42)
4 DIGITAL S.PICTURE button
(see page 43)
5 PICTURE NEUTRAL button
(see page 44)
6 DISPLAY (OSD) button
(see page 20)
7 ANGLE (
) button
(see page 39)
8 AUDIO (
) button
(see page 41)
9 MENU button
(see page 30)
0 '/", \/| buttons
(see page 15)
q ENTER button
(see page 15)
w REPEAT (
) button
(see page 36)
e A-B REPEAT button
(see page 37)
r PROGRAM button
(see page 33)
t DIRECT button
(see page 31)
y MEMORY (M) button
(see page 30)
GB
12
5
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
2
4
6
1
3
OPTICAL
DIGITAL OUT
AC IN
LINE1 OUT
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
VIDEO
S-VIDEO
RGB
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
2
4
5
6
6
1
3
OPTICAL
DIGITAL OUT
AC IN
LINE1 OUT
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
VIDEO
S-VIDEO
RGB
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
9
8
2
4
56
7
1
3
Basic Connection
A
C
• Set the power switch on the player and equipment to
be connected to OFF before connecting.
• Read through the Operation manual for the equipment
to be connected.
• Be sure that the colours of the connectors and plugs
match up when connecting the lead.
The connections described below are for video
connection to the S-VIDEO OUT, VIDEO OUT or LINE1
OUT (21-pin Euro-SCART) connector.
connection to the S-VIDEO OUT, VIDEO OUT or LINE1
OUT (21-pin Euro-SCART) connector.
Connecting to a Stereo TV Set
A
1 TV set (sold separately)
2 DVD player
3 Video/audio lead (supplied)
4 S-video lead (sold separately)
5 To audio input connectors (red, white)
6 To video input connector (yellow)
7 To S-video input connector
8 AC power lead (supplied)
9 To power outlet (AC 220V-240V, 50/60Hz)
• For LINE1 OUT connection, see page 13.
• Refer “VIRTUAL Surround (Audio) Selection” on page 45.
2 DVD player
3 Video/audio lead (supplied)
4 S-video lead (sold separately)
5 To audio input connectors (red, white)
6 To video input connector (yellow)
7 To S-video input connector
8 AC power lead (supplied)
9 To power outlet (AC 220V-240V, 50/60Hz)
• For LINE1 OUT connection, see page 13.
• Refer “VIRTUAL Surround (Audio) Selection” on page 45.
S-video Output Connector
The S-Video (separate) output connector provides access
to separate colour (C) and luminance (Y) signals before
they are combined into composite video (VIDEO OUT).
This gives a sharper picture as the TV set no longer has to
separate them.
Use the S-video lead (supplied) when connecting the
player to a TV set equipped with an S-video input connec-
tor for the best picture clarity possible.
to separate colour (C) and luminance (Y) signals before
they are combined into composite video (VIDEO OUT).
This gives a sharper picture as the TV set no longer has to
separate them.
Use the S-video lead (supplied) when connecting the
player to a TV set equipped with an S-video input connec-
tor for the best picture clarity possible.
Connecting to a Monaural TV Set
B
1 TV set (sold separately)
2 DVD player
3 Audio lead (not supplied)
4 Video/audio lead (supplied)
5 To audio input connector
6 To video input connector
• For LINE1 OUT connection, see page 13.
2 DVD player
3 Audio lead (not supplied)
4 Video/audio lead (supplied)
5 To audio input connector
6 To video input connector
• For LINE1 OUT connection, see page 13.
Connecting to an Audio Equipment
C
1 Audio equipment (sold separately)
2 TV set (sold separately)
3 DVD player
4 Audio lead (not supplied)
5 To audio input connectors (red, white)
6 Video/audio lead (supplied)
7 S-video lead (not supplied) (See above
2 TV set (sold separately)
3 DVD player
4 Audio lead (not supplied)
5 To audio input connectors (red, white)
6 Video/audio lead (supplied)
7 S-video lead (not supplied) (See above
A
)
• For LINE1 OUT connection, see page 13.
B
Notes on Installation:
Bundling the lead connecting the DVD player and
television with the antenna cable can cause
electrical interference when you are watching
television programmes. Be sure to keep the DVD
player connection leads separate from the
antenna lead when you install the player.
Bundling the lead connecting the DVD player and
television with the antenna cable can cause
electrical interference when you are watching
television programmes. Be sure to keep the DVD
player connection leads separate from the
antenna lead when you install the player.
13
GB
SETTING UP
Connecting to a Monitor or TV Equipped
with a 21-pin Euro-SCART Connector
with a 21-pin Euro-SCART Connector
When connecting the player to a TV set equipped with a 21-pin Euro-
SCART connector, use a 21-pin Euro-SCART cable (commercially
available) connected to the LINE1 OUT connector instead of the
video/audio cable supplied with the player connected to the VIDEO
OUT connector.
The output signal from the LINE1 OUT (21-Pin Euro-SCART) connec-
tor changes according to the position to which the LINE1 OUT (21-
Pin Euro-SCART) output mode changeover switch is moved. (See
page 10.)
SCART connector, use a 21-pin Euro-SCART cable (commercially
available) connected to the LINE1 OUT connector instead of the
video/audio cable supplied with the player connected to the VIDEO
OUT connector.
The output signal from the LINE1 OUT (21-Pin Euro-SCART) connec-
tor changes according to the position to which the LINE1 OUT (21-
Pin Euro-SCART) output mode changeover switch is moved. (See
page 10.)
1
If you switch the DVD player on while you are watching a TV
broadcast, the TV screen automatically switches to AV mode
and starts showing the DVD image.
broadcast, the TV screen automatically switches to AV mode
and starts showing the DVD image.
2
If you press the Ë STOP button on the remote control (DVD
Player: ) and the STOP mode remains for more than 5 minutes
while you are watching a DVD disc on the TV, the DVD image
disappears and the picture reverts to the original image. If you
then press the û PLAY button (DVD Player:
Player: ) and the STOP mode remains for more than 5 minutes
while you are watching a DVD disc on the TV, the DVD image
disappears and the picture reverts to the original image. If you
then press the û PLAY button (DVD Player:
), the DVD
image returns.
On some TVs, the above operations may not work as described.
OPTICAL
DIGITAL OUT
CLASS 1
LASER PRODUCT
LASER PRODUCT
LINE1 OUT
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
OPTICAL
DIGITAL OUT
LINE1 OUT
VIDEO
S-VIDEO
RGB
VIDEO
S-VIDEO
RGB
LINE1 OUT
21-pin Euro-SCART
cable
cable
LINE1 OUT (21-pin Euro-SCART)
output mode changeover switch
output mode changeover switch
Basic Connection
GB
14
Optional Audio Connection
Connecting to a Decoder with
Dolby Digital (AC-3)/MPEG 1/2
Audio Processing or an
Amplifier with a DTS Decoder
Dolby Digital (AC-3)/MPEG 1/2
Audio Processing or an
Amplifier with a DTS Decoder
When DVDs recorded in Dolby Digital or MPEG 1/2
Audio are played, Dolby Digital or MPEG 1/2 Audio bit
stream is output from the DVD player’s OPTICAL
DIGITAL OUT connector and DIGITAL OUT connector.
When the DVD player is connected to a Dolby Digital
or MPEG 1/2 Audio decoder, you can enjoy theatre-
quality audio right in your home.
(An optional optical digital cable is required when an
optional Dolby Digital decoder is used. Similarly, you
must purchase a separate cable when you use the
DIGITAL OUT connector.)
Audio are played, Dolby Digital or MPEG 1/2 Audio bit
stream is output from the DVD player’s OPTICAL
DIGITAL OUT connector and DIGITAL OUT connector.
When the DVD player is connected to a Dolby Digital
or MPEG 1/2 Audio decoder, you can enjoy theatre-
quality audio right in your home.
(An optional optical digital cable is required when an
optional Dolby Digital decoder is used. Similarly, you
must purchase a separate cable when you use the
DIGITAL OUT connector.)
• You can also enjoy DTS sound from DVD discs
recorded in DTS format by connecting your DVD
player to an amplifier equipped with a DTS decoder.
player to an amplifier equipped with a DTS decoder.
• “DTS” and “DTS Digital Surround” are trademarks
of Digital Theater Systems, Inc.
• This DVD player has been equipped with a DTS*-
compatible digital audio output connectors
(optical/coaxial). As an optional audio format for
the DVD-video specification, this enhances
possibilities for future system expansion.
(optical/coaxial). As an optional audio format for
the DVD-video specification, this enhances
possibilities for future system expansion.
*A DTS-compatible AV amplifier and DTS-
compatible discs are necessary to enjoy DTS
high-quality sound.
high-quality sound.
1 TV set (sold separately)
2 DVD player
3 Video/audio lead (supplied)
2 DVD player
3 Video/audio lead (supplied)
S-video lead (not supplied) (See
A
on page 12)
4 Decoder or Amplifier with Dolby Digital (AC-3)/
MPEG 1/2 Audio multi channel (5.1ch) processing
(not supplied)
[or Amplifier with DTS decoder (not supplied)]
(not supplied)
[or Amplifier with DTS decoder (not supplied)]
5 Optical digital cable (not supplied)/or coaxial cable (not supplied).
(Use the appropriate cable for your audio system.)
6 Connector for optical digital sound input or coaxial digital input.
(Use the appropriate connector for your audio system.)
Connect the speakers.
7 Front speaker (Left)
8 Front speaker (Right)
• For LINE1 OUT connection, see page 13.
7 Front speaker (Left)
8 Front speaker (Right)
• For LINE1 OUT connection, see page 13.
Remove the
protective cap
before connecting.
protective cap
before connecting.
• This DVD player has four kinds of digital output audio streams: MPEG, AC-3, LPCM and DTS.
D I G I T A L
DOLBY
on the front panel display lights only for AC-3, and not for MPEG, LPCM and DTS.
• For DTS CD playback, audio mode should be set to “L+R”. The Digital Out signal can not be output correctly if audio
mode is set to “L” or “R”. (See page 41)
CAUTION:
Some audio CDs and video CDs have a short silent section between musical tracks. When sound from discs
such as these is digitally recorded by connected directly to a digital recorder (such as a MD), the music may
be recorded continuously and track numbers may be lost.
such as these is digitally recorded by connected directly to a digital recorder (such as a MD), the music may
be recorded continuously and track numbers may be lost.
OPTICAL
DIGITAL OUT
LINE1 OUT
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
OPTICAL
DIGITAL OUT
LINE1 OUT
VIDEO
S-VIDEO
RGB
VIDEO
S-VIDEO
RGB
7
0
q
w
8
9
1
2
3
3
5
5
6 6
4
9 Centre speaker
0 Subwoofer
0 Subwoofer
q Surround speaker (Left)
w Surround speaker (Right)
w Surround speaker (Right)
Click on the first or last page to see other DV-600H (serv.man5) service manuals if exist.