Sharp BD-HP35S (serv.man9) User Manual / Operation Manual ▷ View online
51
Settings
SETTINGS
Software Update Settings
In this player, the software version can be updated
using either one of the following methods.
• Auto Update from Network
• Manual Update from Network
• Manual Update from USB memory device
Auto Update from Network
This function allows you to perform the update by
accessing an Internet connection automatically to
check if there is a new firmware version every time
the player is turned on.
When using this function, it is required to perform
the following settings in advance.
NOTE
• Make sure that the LAN cable or the wireless LAN
adapter is connected to this player and make sure that
the wireless router/access point is connected to the
Internet if using the wireless LAN adapter. (See pages
18–19.)
• Make sure to perform the communication settings. (See
pages 46–49.)
• It may take time to access and download the update
depending on the Internet connection and other factors.
CAUTION
• Do not remove the LAN cable or the wireless LAN
adapter or unplug the AC cord while downloading or
updating software.
Setup
1
Press a/b to select “Settings”, then press d or
ENTER.
2
Press a/b to select “Software Update
Settings”, then press d or ENTER.
3
Press a/b to select “Auto Update Setting”,
then press d or ENTER.
4
Press a/b to select “Yes”, then press ENTER.
• After this, an Internet connection will be made
automatically every time this player is turned on.
Update process
1
When this player is turned on, the Internet
connection starts automatically.
• “
Accessing...” blinks on the screen.
• The current version of this unit software and the
latest version of the update file on the network are
displayed when latest version of firmware has been
found.
To update this player software with update file,
select “Yes”, and go to step 2.
Latest version of firmware has been found.
Firmware update is available.
Proceed with update?
If “Yes” will be selected, version update will start.
Current Version :
Latest Version :
Latest Version :
xxxxxxxxxx
yyyyyyyyyy
Yes
No
• If the latest firmware version has been already
updated, nothing is displayed on the screen.
2
Press
ENTER to start updating.
Downloading latest firmware…
Version :
yyyyyyyyyy
30%
3
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
• If the update has failed, an error message appears.
Retry the update after checking if the broadband
Internet connection (pages 18–19) and
communication settings (pages 46–49) are
performed properly.
4
Press B to turn off the player before using
again.
52
SETTINGS
Manual Update from Network
This function allows you to perform the update
operation by accessing an Internet connection
manually to check if there is a new firmware version.
NOTE
• Make sure that the LAN cable or the wireless LAN
adapter is connected to this player and make sure that
the wireless router/access point is connected to the
Internet if using the wireless LAN adapter. (See pages
18–19.)
• Make sure to perform the communication settings. (See
pages 46–49.)
• It may take time to access and download the update
depending on the Internet connection and other factors.
CAUTION
• Do not remove the LAN cable or the wireless LAN
adapter or unplug the AC cord while downloading or
updating software.
1
Press a/b to select “Settings”, then press d or
ENTER.
2
Press a/b to select “Software Update
Settings”, then press d or ENTER.
3
Press a/b to select “Manual Update”, then
press d or ENTER.
4
Press a/b to select “Network”, then press
ENTER.
5
During access to the network and checking the
latest version of firmware, “Accessing” blinks.
• The current version of this unit software and the
latest version of the update file on the network are
displayed when latest version of firmware has been
found.
To update this player software with update file,
select “Yes”, and go to step 6.
Latest version of firmware has been found.
Firmware update is available.
Proceed with update?
If “Yes” will be selected, version update will start.
Current Version :
Latest Version :
Latest Version :
xxxxxxxxxx
yyyyyyyyyy
Yes
No
• If the Internet connection has failed, an error
message appears.
Retry the update after checking if the broadband
Internet connection (pages 18–19) and
communication settings (pages 46–49) are
performed properly.
6
Press
ENTER to start updating.
Downloading latest firmware…
Version :
yyyyyyyyyy
30%
7
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
• If the update has failed, an error message appears.
Retry the update after checking if the broadband
Internet connection (pages 18–19) and
communication settings (pages 46–49) are
performed properly.
8
Press B to turn off the player.
Manual Update from USB memory
device
This function allows software updates by inserting
a USB memory device with the update file into the
USB1 or USB2 terminal on this player.
• When a software update is performed, the software
update data must be written onto the USB memory
device in advance using a PC.
• The USB memory device must be clear of all files
except software update data to allow new software
uploading.
To check for the availability of a software update,
visit www.sharp.co.uk/gb.
• When software update data is released, copy the data
onto a USB memory device after downloading it to a
PC.
• For methods such as downloading and copying to a
USB memory device, carefully read the description
shown on the website before performing the operation.
53
Settings
SETTINGS
NOTE
• Only USB memory devices formatted with FAT 32/16 are
compatible.
When formatting a USB memory device using a PC,
perform the following settings.
Format File System: FAT32
Allocation Unit Size: Default Allocation Size
• Do not extract the firmware update file to any folders
other than the root directory on the USB memory
device. The firmware update file must be only one file
directly in the root directory.
CAUTION
• Do not remove the USB memory device or unplug the
AC cord while the software is being updated.
When you insert or remove a USB memory device,
be sure to turn the main power off and make sure
that “Quick Start” is set to “No” (See page 43).
1
Insert the USB memory device with the update
file into the USB1 or USB2 terminal on this
player.
• It is recommended that the USB memory device be
connected to the USB2 terminal on the front of the
player.
NOTE
• A USB memory device can be used with either the
USB1 or USB2 terminal. When two USB memory
devices are connected to both terminals at the same
time, in certain situations the USB1 terminal may give
priority to Local Storage and the USB1 terminal cannot
be used for Software Update.
Front
USB memory device
2
Press B to turn on the power.
3
Press a/b to select “Settings”, then press d or
ENTER.
4
Press a/b to select “Software Update
Settings”, then press d or ENTER.
5
Press a/b to select “Manual Update”, then
press d or ENTER.
6
Press a/b to select “USB Memory”, then press
ENTER.
• If you have not yet set the PIN code, go to step 7.
7
Enter the 4-digit number using 0–9.
Enter 4-digit PIN code
8
Press
ENTER to start checking data in the USB
memory device.
Insert USB memory device containing
the software update file.
OK
9
During the data checking, “Checking” blinks.
Now checking the data in USB memory device.
Checking
• The current version of this unit software and the
version of the update file on the USB memory
device are displayed. To update this player software
with update file, select “Yes”, and press
ENTER.
Software update file is detected in the USB memory device.
Start update?
Current Ver. :
Update Ver. :
Update Ver. :
xxxxxxxxxx
yyyyyyyyyy
Yes
No
(Continued on the next page)
54
SETTINGS
• If the USB memory device is not properly installed
or the correct update file cannot be found on
the USB memory device, an error message is
displayed.
Check the file on the USB memory device, and then
reinsert the USB memory device correctly.
Software update file is not detected in the USB memory device.
Confirm that you have transferred the file
to the USB memory device and retry software update.
Confirm that you have inserted the USB memory device
into the correct device.
Confirm that you have transferred the file
to the USB memory device and retry software update.
Confirm that you have inserted the USB memory device
into the correct device.
OK
There is more than one software file
in the USB memory device.
Confirm that only the software update file is
in the USB memory device.
in the USB memory device.
Confirm that only the software update file is
in the USB memory device.
OK
10
Press ENTER to start updating.
• The screen becomes dark for a while until the
update screen can be displayed. Please wait for
the update screen to appear. Do not unplug the AC
cord.
The picture will temporarily go dark until
the software update display appears.
Wait several minutes and do not unplug the AC cord.
the software update display appears.
Wait several minutes and do not unplug the AC cord.
OK
Now updating
Do not unplug AC cord.
Update Version
*
30%
yyyyyyyyyy
11
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
• If the update has failed, check the file in the USB
device and try Software Update again.
12
Press B to turn off the player.
• Delete unneeded software update data using a PC
after the software update process is completed.
13
Remove the USB memory device.
About Output of Audio Formats
Audio format
Maximum number of
channels
HDMI
DIGITAL OUT
PCM
Bitstream
PCM
Bitstream
Dolby TrueHD
7.1ch (48kHz/96kHz)
7.1ch *
3
7.1ch *
4
2ch *
2
5.1ch *
1/
*
3
5.1ch (192kHz)
5.1ch *
3
5.1ch *
4
2ch *
2
5.1ch *
1/
*
3
Dolby Digital PLUS
7.1ch (48kHz)
7.1ch
7.1ch *
4
2ch *
2
5.1ch *
1/
*
3
DTS-HD Master Audio
7.1ch (48kHz/96kHz)
7.1ch *
3
7.1ch *
4
2ch *
2
5.1ch *
1/
*
3
5.1ch (192kHz)
5.1ch *
3/
*
5
5.1ch *
4
2ch *
2
5.1ch *
1/
*
3
DTS-HD High Resolution Audio
7.1ch (48kHz/96kHz)
7.1ch *
3
7.1ch *
4
2ch *
2
5.1ch *
1/
*
3
LPCM
7.1ch (48kHz/96kHz)
7.1ch *
3
—
2ch *
2
—
5.1ch (192kHz)
5.1ch *
3
—
2ch *
2
—
I
Core only
J
Down mixed
K
When “Secondary Audio” is set to “On”, the audio is output as 48kHz.
L
When “Secondary Audio” is set to “On”, the audio is output as PCM.
M
When 5.1ch (192kHz), the audio output is downsampled to 96kHz.
M
When 2ch, the audio is output as 192kHz.
Click on the first or last page to see other BD-HP35S (serv.man9) service manuals if exist.