Sharp XL-MP8H (serv.man2) User Manual / Operation Manual ▷ View online
05/6/10
XL-MP8H(E)1.fm
6
TINSZA056SJZZ
XL-MP8H
Prepar
ation for
Use
System connections
Aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
Position the FM aerial wire and rotate the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
Notes:
z
Placing the aerial on the unit or near the AC power lead may
cause noise pickup. Place the aerial away from the unit for better
reception.
cause noise pickup. Place the aerial away from the unit for better
reception.
z
Do not connect the attached FM aerial to an external aerial as
this may cause trouble.
this may cause trouble.
Installing the AM loop aerial:
Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
plain wire to the plus (+) terminal.
plain wire to the plus (+) terminal.
Caution:
Right speaker
AM loop aerial
FM aerial
Left speaker
Make sure to unplug the AC power lead
before making any connections.
before making any connections.
Plain
White line
Wall socket
(AC 230 V, 50 Hz)
(AC 230 V, 50 Hz)
< Assembling >
< Attaching to the wall >
Wall
Screws (not supplied)
z
Do not let the bare speaker wires touch each
other.
other.
Incorrect
z
Use speakers with an impedance of 4 ohms or
more, as lower impedance speakers can damage
the unit.
more, as lower impedance speakers can damage
the unit.
z
Do not mistake the right and the left channels.
The right speaker is the one on the right side
when you face the unit.
The right speaker is the one on the right side
when you face the unit.
z
Do not allow any objects to fall into or to be placed
in the bass reflex ducts.
in the bass reflex ducts.
2
05/6/10
XL-MP8H(E)1.fm
7
TINSZA056SJZZ
XL-MP8H
Prepar
ation for
Use
System connections (continued)
AC power connection
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
Notes:
z
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
be in use for a prolonged period of time.
z
Never use a power lead other than the one supplied. Otherwise,
a malfunction or an accident may occur.
a malfunction or an accident may occur.
To turn the power on
Press the ON/STAND-BY button to turn the power on.
Wall socket
(AC 230 V, 50 Hz)
(AC 230 V, 50 Hz)
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
mode.
05/6/10
XL-MP8H(E)1.fm
8
TINSZA056SJZZ
XL-MP8H
Prepar
ation for
Use
Remote control
Battery installation
Precautions for battery use:
z
Replace all old batteries with new ones at the same time.
z
Do not mix old and new batteries.
z
Remove the batteries if the unit is not to be used for long periods
of time. This will prevent potential damage due to battery leak-
age.
of time. This will prevent potential damage due to battery leak-
age.
Caution:
z
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
z
Installing the batteries incorrectly may cause the unit to malfunc-
tion.
tion.
Battery removal:
Remove the battery cover. Push each battery toward the battery
terminal and take them out.
Remove the battery cover. Push each battery toward the battery
terminal and take them out.
Notes concerning use:
z
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic.
operation becomes erratic.
z
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
sensor on the unit with a soft cloth.
z
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
operation. Change the lighting or the direction of the unit.
z
Keep the remote control away from moisture, heat, shock, and
vibrations.
vibrations.
Test of the remote control
Check the remote control after checking all the connections.
Point the remote control directly at the remote sensor on the unit.
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now,
you can enjoy music.
Press the ON/STAND-BY button. Does the power turn on? Now,
you can enjoy music.
Use 2 "AAA" size batteries (UM-4, R03, HP-16 or similar).
Batteries are not included.
Batteries are not included.
1
Remove the battery cover.
2
Insert the batteries according to the direction indicated in
the battery compartment.
the battery compartment.
When inserting or removing the batteries, push them toward the
battery terminals.
3
Replace the cover.
Remote sensor
0.2 m - 6 m
(8" - 20')
(8" - 20')
2
05/6/10
XL-MP8H(E)1.fm
9
TINSZA056SJZZ
XL-MP8H
Basic
Operati
o
n
Sound control
Adjusting the volume
Main unit operation:
Move the operation lever toward VOLUME + or VOLUME - to
increase or decrease the volume.
Move the operation lever toward VOLUME + or VOLUME - to
increase or decrease the volume.
Remote control operation:
Press the VOLUME (- or +) button to increase or decrease the vol-
ume.
Press the VOLUME (- or +) button to increase or decrease the vol-
ume.
Adjusting the bass
Main unit operation:
1
1
Press the BASS/TREBLE button to select "BASS".
2
Within 5 seconds, move the operation lever toward VOLUME +
or VOLUME - to adjust the bass.
or VOLUME - to adjust the bass.
Remote control operation:
1
1
Press the BASS/TREBLE button to select "BASS".
2
Within 5 seconds, press the VOLUME (- or +) button to adjust
the bass.
the bass.
Adjusting the treble
Main unit operation:
1
1
Press the BASS/TREBLE button to select "TRE".
2
Within 5 seconds, move the operation lever toward VOLUME +
or VOLUME - to adjust the treble.
or VOLUME - to adjust the treble.
Remote control operation:
1
1
Press the BASS/TREBLE button to select "TRE".
2
Within 5 seconds, press the VOLUME (- or +) button to adjust
the treble.
the treble.
2
1
28
29 MAX
MIN
.....
0
4
-3
...
...
0
4
-3
...
...
Click on the first or last page to see other XL-MP8H (serv.man2) service manuals if exist.