Sharp XL-MP8H (serv.man2) User Manual / Operation Manual ▷ View online
05/6/10
XL-MP8H(E)2.fm
18
TINSZA056SJZZ
XL-MP8H
Radio
Listening to the memorised station
Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
the push of a button. (Preset tuning)
Notes:
z
On the remote control, press the SHIFT button and then the
MEMORY button in step 2 and 4.
MEMORY button in step 2 and 4.
z
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead dis-
connection.
hours should there be a power failure or the AC power lead dis-
connection.
To recall a memorised station
Move the operation lever toward PRESET or PRESET for less
than 0.5 seconds to select the desired station.
than 0.5 seconds to select the desired station.
To select a preset station with the direct number buttons:
Press the corresponding number ("0" - "+10").
Press the corresponding number ("0" - "+10").
Example:
To select 28, press "+10", "+10" and "8".
To select 28, press "+10", "+10" and "8".
To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
set memory scan)
To clear a memorised station
To erase entire preset memory
1
Perform steps 1 - 3 in "Listening to the radio" on page 17.
2
Press the MEMORY/SET button to
enter the preset tuning saving
mode.
enter the preset tuning saving
mode.
3
Within 5 seconds, move the opera-
tion lever toward PRESET or
PRESET to select the preset
channel number.
tion lever toward PRESET or
PRESET to select the preset
channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 5 seconds, press the MEM-
ORY/SET button to store that sta-
tion in memory.
ORY/SET button to store that sta-
tion in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
memorised will be erased.
1
Move the operation lever toward PRESET or PRESET for
more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Move the operation lever toward PRESET or PRESET again
when the desired station is located.
when the desired station is located.
1
Recall the memorised station.
2
Whilst it is displayed, press the MEMORY/SET button.
z
On the remote control, press the SHIFT button and then the
MEMORY button.
MEMORY button.
3
Within 5 seconds, press the CLEAR button.
z
On the remote control, press the SHIFT button and then the
CLEAR button.
CLEAR button.
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
mode.
2
Whilst pressing down the MEMORY/SET button and move the
operation lever toward PRESET , press the ON/STAND-BY
button until "TUCL" appears.
operation lever toward PRESET , press the ON/STAND-BY
button until "TUCL" appears.
5
05/6/10
XL-MP8H(E)2.fm
19
TINSZA056SJZZ
XL-MP8H
Advanc
e
d Featu
res
Timer and sleep operation
Timer playback:
The unit turns on and plays the desired source (disc or tuner) at a
preset time.
The unit turns on and plays the desired source (disc or tuner) at a
preset time.
Sleep operation:
The radio or disc can be turned off automatically.
The radio or disc can be turned off automatically.
Before setting timer:
You can use buttons on the remote control instead of the operation
lever.
Press the SHIFT button before pressing the TIMER or the MEM-
ORY button.
Timer playback
1
Check that the clock is set to the correct time (refer to page 10).
2
Load a disc to be played.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button to select the desired source
(disc or tuner).
(disc or tuner).
Depending on the source, insert a disc or tune in to a station.
3
Adjust the volume using the volume control.
Do not turn the volume up too high.
4
Press the TIMER button. Within 8 seconds, press the MEM-
ORY/SET button.
ORY/SET button.
5
Within 1 minute, move the operation lever toward PRESET
or PRESET to specify the hour to start, then press the
MEMORY/SET button.
6
Within 1 minute, move the operation lever toward PRESET
or PRESET to specify the minutes to start, then press
the MEMORY/SET button.
z
The timer playback starting time, function, and volume will be
displayed, and then the unit will enter the stand-by mode au-
tomatically.
displayed, and then the unit will enter the stand-by mode au-
tomatically.
z
" " will appear and the current time will be displayed.
To cancel the timer playback:
Press the ON/STAND-BY button to turn the power on.
05/6/10
XL-MP8H(E)2.fm
20
TINSZA056SJZZ
XL-MP8H
Advanc
e
d Featu
res
To reset or change the timer setting:
Perform "Timer playback" from the beginning.
Perform "Timer playback" from the beginning.
Note:
When performing timer playback using another unit connected to
the LINE sockets, select "AUX" in step 2. At this time, only this unit
will be turned on or enter the power stand-by mode automatically. It
will enter the power stand-by mode 1 hour after the timer playback
starts. However, the other unit will not be turned on or off.
When performing timer playback using another unit connected to
the LINE sockets, select "AUX" in step 2. At this time, only this unit
will be turned on or enter the power stand-by mode automatically. It
will enter the power stand-by mode 1 hour after the timer playback
starts. However, the other unit will not be turned on or off.
To use timer and sleep operation together
Example: To fall asleep and wake up to the same radio station
You can play back the same source only (the function cannot be
switched).
You can play back the same source only (the function cannot be
switched).
Sleep operation
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, press the SLEEP button until "OFF" appears on the
display.
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, press the SLEEP button until "OFF" appears on the
display.
z
On the remote control, press the SHIFT button and then the
SLEEP button.
SLEEP button.
To confirm the remaining sleep time:
Press the SLEEP button once whilst the sleep timer is set.
Press the SLEEP button once whilst the sleep timer is set.
z
On the remote control, press the SHIFT button and then the
SLEEP button.
SLEEP button.
The remaining sleep time is displayed for about 8 seconds.
7
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the volume
you were listening at before your system enters the timer stand-
by mode.
you were listening at before your system enters the timer stand-
by mode.
8
The unit will enter the stand-by mode one hour after the
timer playback starts. However, when disc playback time is
one hour or less, it will enter the stand-by mode after com-
pleting playback.
timer playback starts. However, when disc playback time is
one hour or less, it will enter the stand-by mode after com-
pleting playback.
1
Set the sleep time (steps 1 - 2 on the right).
2
Whilst the sleep timer is set, set the desired playback time
(steps 4 - 6, page 19).
(steps 4 - 6, page 19).
Sleep timer setting
Timer playback setting
Sleep operation will
automatically stop.
automatically stop.
Timer playback
start time
start time
5 minutes - 3 hours
1
Play back the desired sound source.
2
Press the SLEEP button.
On the remote control, press the SHIFT
button and then the SLEEP button.
button and then the SLEEP button.
To change the sleep time:
Time decreases as follows each time they are pressed.
The amount of sleep time can also be changed whilst in the
sleep mode.
sleep mode.
(Maximum: 3 hours - Minimum: 5 minutes)
3
Your system will enter the power stand-by mode automat-
ically after the preset time has elapsed.
ically after the preset time has elapsed.
The volume will turn down 30 seconds before the sleep opera-
tion finishes.
tion finishes.
3:00
2:00
1:30
1:00
10
15
30
5
OFF
6
05/6/10
XL-MP8H(E)2.fm
21
TINSZA056SJZZ
XL-MP8H
Advanc
e
d Featu
res
Enhancing your system
Headphones
z
Before plugging in or unplugging the headphones, reduce the
volume.
volume.
z
Be sure your headphones have a 3.5 mm (1/8") diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
z
Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the volume control.
cally. Adjust the volume using the volume control.
Connecting source equipment
You can listen to sound of source equipment through the unit. Set
the function to "AUX" beforehand.
the function to "AUX" beforehand.
Connecting recording equipment
You can record sound of the unit to recording equipment. Use an
audio cable for connection.
audio cable for connection.
Notes:
z
Plug in each cable fully to prevent noise interference.
z
Refer to the manual for the connected equipment.
z
Do not connect the input and output sockets to the same external
equipment. Howling may result.
equipment. Howling may result.
z
To prevent noise interference, place the unit away from the tele-
vision.
vision.
Source equipment
Recording equipment
To audio output socket
(Commercially available)
(Commercially available)
To audio input sockets
(Commercially available)
(Commercially available)
Note:
The LINE IN/OUT sockets accept 2.5 mm (3/32") mini plugs
only.
Use the supplied 3.5 mm (1/8") to 2.5 mm (3/32") plug
adaptor. (Only one plug adaptor is supplied with the unit.)
The LINE IN/OUT sockets accept 2.5 mm (3/32") mini plugs
only.
Use the supplied 3.5 mm (1/8") to 2.5 mm (3/32") plug
adaptor. (Only one plug adaptor is supplied with the unit.)
Turn off all other equipment before making this connection.
Click on the first or last page to see other XL-MP8H (serv.man2) service manuals if exist.