DOWNLOAD Sharp XL-HP600 Service Manual ↓ Size: 1.37 MB | Pages: 32 in PDF or view online for FREE

03/1/31

XL-HP600E(E)1.fm

XL-HP600E

! Battery installation

 
Precautions for battery use:
" Replace all old batteries with new ones at the same time.
" Do not mix old and new batteries.
" Remove the batteries if the unit is not to be used for long periods

of time. This will prevent potential damage due to battery leak-
age.

Caution:
" Do not use rechargeable batteries (nickel-cadmium battery, etc.).
" Installing the batteries incorrectly may cause the unit to malfunc-

tion.

Notes concerning use:
" Replace the batteries if the operating distance is reduced or if the

operation becomes erratic.

" Periodically clean the transmitter on the remote control and the

sensor on the unit with a soft cloth.

" Exposing the sensor on the unit to strong light may interfere with

operation. Change the lighting or the direction of the unit.

" Keep the remote control away from moisture, heat, shock, and

vibrations.

 

! Test of the remote control

Check the remote control after checking all the connections (see
pages 10 - 11).
Point the remote control directly at the remote sensor on the unit.

The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now,
you can enjoy music.

Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).

Batteries are not included.

 

When inserting or removing the batteries, push them towards the 

 battery terminals.

0.2 m - 6 m
(8" - 20')

Remote sensor

03/1/31

XL-HP600E(E)1.fm

XL-HP600E

! Aerial connection

Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position
the FM aerial wire in the direction where the strongest signal can be
received.

Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).

Note:
Placing the aerial on the stereo system or near the AC power lead
may cause noise pickup. Place the aerial away from the stereo sys-
tem for better reception.

 
External FM aerial:
Use an external FM aerial if you require better reception. Consult
your dealer.

Black

Red

Black

Red

< Assembling >

< Attaching to the wall >

 Wall  

Screws 

(not 

supplied)

External FM aerial

03/1/31

XL-HP600E(E)2.fm

XL-HP600E

! Speaker connection

Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.

Caution:
" Connect the speaker wires to the speakers first, then to the

" Use speakers with an impedance of 6 ohms or more, as lower

impedance speakers can damage the unit.

" Do not mistake the right and the left channels. The right speaker

is the one on the right side when you face the unit.

" Do not let the bare speaker wires touch each other.
" Do not allow any objects to fall into or to be placed in the bass

reflex ducts.

" Do not stand or sit on the speakers. You may be injured.

! Connecting the AC power lead

After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.

Notes:
" The unit will start the tape initialisation when plugged in to the AC

socket. During this process, initialising sound will be heard and
the unit cannot be turned on. Wait until the process is finished.

" Unplug the AC power lead from the wall socket if the unit will not

be in use for a prolonged period of time.

 

! Demonstration mode

To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode),
press the X-BASS/DEMO button. The unit will enter the low power
consumption mode.

To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.

Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.

 

! To turn the power on

Press the ON/STAND-BY button to turn the power on.

Make sure nothing comes into contact 
with the speaker diaphragms when you 
remove the speaker grilles.

The first time the unit is plugged in, the 
unit will enter the demonstration mode. 
You will see words scroll.

Press the ON/STAND-BY button to enter the power stand-by 
mode.

03/1/31

XL-HP600E(E)2.fm

XL-HP600E

 

! Volume control

Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.

Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the vol-
ume.

! Bass control

When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and "X-BASS" will
appear. To cancel the extra bass mode, press the X-BASS/DEMO
(X-BASS) button.

 
 

! Equaliser

When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat-
edly until the desired sound mode appears.

1

2

29

30 MAXIMUM

0

.....

X-BASS indicator

ROCK

FLAT

CLASSIC

The sound is not modified.

Bass and treble are emphasised.

POPS

Bass and treble are slightly emphasised.

JAZZ

Treble is slightly emphasised.

Treble is cut a little.

VOCAL

Vocals (midrange tones) are emphasised.