Sharp XL-HP600 User Manual / Operation Manual ▷ View online
03/1/31
XL-HP600E(E)3.fm
25
XL-HP600E
Adv
a
nced F
eatures
To reset or change the timer setting:
Perform "Timer playback or timer recording" from the beginning.
Perform "Timer playback or timer recording" from the beginning.
Note:
When performing timer playback or recording using another unit con-
nected to the VIDEO/AUX sockets, select "VIDEO/AUX" in step 2.
At this time, only this unit will be turned on or enter the power stand-
by mode automatically. It will enter the power stand-by mode when
the end of the recording tape is reached in timer recording or 1 hour
after the playback starts in timer playback. However, the other unit
will not be turned on or off.
When performing timer playback or recording using another unit con-
nected to the VIDEO/AUX sockets, select "VIDEO/AUX" in step 2.
At this time, only this unit will be turned on or enter the power stand-
by mode automatically. It will enter the power stand-by mode when
the end of the recording tape is reached in timer recording or 1 hour
after the playback starts in timer playback. However, the other unit
will not be turned on or off.
5
Press the TUNING/TIME ( or ) button to specify the hour
to start, then press the MEMORY/SET button.
to start, then press the MEMORY/SET button.
The illustrations show the timer playback setting.
6
Press the TUNING/TIME ( or ) button to specify the min-
utes, then press the MEMORY/SET button.
utes, then press the MEMORY/SET button.
The unit will enter the timer stand-by mode automatically.
To cancel the timer playback/timer recording:
Press the ON/STAND-BY button to turn the power on.
7
When the preset time is reached, playback or recording will
start.
start.
The volume will increase gradually until it reaches the volume
you were listening to before your system entered the timer
stand-by mode.
you were listening to before your system entered the timer
stand-by mode.
In timer playback:
If you select CD or TAPE, the unit will enter the stand-by mode
after the playback. If you select TUNER, it will enter the stand-
by mode one hour after the timer playback starts.
after the playback. If you select TUNER, it will enter the stand-
by mode one hour after the timer playback starts.
In timer recording:
When the recording tape reaches its end, the timer recording
will end, and the unit will enter the stand-by mode.
will end, and the unit will enter the stand-by mode.
03/1/31
XL-HP600E(E)3.fm
26
XL-HP600E
Adv
a
nced F
eatures
Timer and sleep operation (continued)
! Sleep operation
To cancel the sleep operation:
Press the ON/STAND-BY button whilst the sleep timer is set.
Press the ON/STAND-BY button whilst the sleep timer is set.
To confirm the remaining sleep time:
Press the TIMER/SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 5 seconds.
Press the TIMER/SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 5 seconds.
Enhancing your system
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
able lead as shown below.
! Listening to the playback sounds from VCR,
DVD, etc.
Note:
To prevent noise interference, place the unit away from the televi-
sion.
To prevent noise interference, place the unit away from the televi-
sion.
1
Play back the desired sound source.
2
Press the TIMER/SLEEP button repeatedly until "SLEEP" is
displayed.
displayed.
To change the sleep time:
Whilst the sleep time is displayed, press the TUNING/TIME (
or )
or )
button.
(Maximum: 3 hours - Minimum: 1 minute)
" 3 hours - 5 minutes 5-minute intervals
" 5 minutes - 1 minute 1-minute intervals
" 3 hours - 5 minutes 5-minute intervals
" 5 minutes - 1 minute 1-minute intervals
3
Press the MEMORY/SET button.
4
Your system will enter the power stand-by mode automat-
ically after the preset time has elapsed.
ically after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep op-
eration finishes.
eration finishes.
1
Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
VIDEO/AUX sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
4
Play the connected equipment.
VCR, DVD, etc.
To the line
output sockets
output sockets
Red
RCA lead
(not supplied)
(not supplied)
White
Red White
03/1/31
XL-HP600E(E)3.fm
27
XL-HP600E
Adv
a
nced F
eatures
! To record on a tape
! Headphones
" Before plugging in or unplugging the headphones, reduce the
volume.
" Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.
mended impedance is 32 ohms.
" Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
! Subwoofer connection
When a commercially available speaker with a built-in amplifier is
connected to this unit, you can enjoy sound with emphasised bass.
Connect an RCA lead from a commercially available speaker with a
built-in amplifier to the SUBWOOFER socket.
connected to this unit, you can enjoy sound with emphasised bass.
Connect an RCA lead from a commercially available speaker with a
built-in amplifier to the SUBWOOFER socket.
1
Insert a cassette in the cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the
button.
4
Press the / ( ) or button.
5
Play the VCR, DVD, etc.
Speaker with a
built-in amplifier
built-in amplifier
03/1/31
XL-HP600E(E)3.fm
28
XL-HP600E
Referenc
es
Troubleshooting chart
Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
! General
! CD player
! Tuner
! Cassette deck
Symptom
Possible cause
" The clock is not set to the
correct time.
" Did a power failure occur? Reset
the clock. (Refer to page 13.)
" When a button is pressed,
the unit does not respond.
" Set the unit to the power stand-
by mode and then turn it back on.
" If the unit still malfunctions, reset
it. (Refer to page 29.)
" No sound is heard.
" Is the volume level set to "0"?
" Are the headphones connected?
" Are the speaker wires discon-
" Are the headphones connected?
" Are the speaker wires discon-
nected?
Symptom
Possible cause
" Playback does not start.
" Is the disc loaded upside down?
" Playback stops in the mid-
dle or is not performed
properly.
properly.
" Does the disc satisfy the stan-
dards?
" Is the disc distorted or
scratched?
" Playback sounds are
skipped, or stopped in the
middle of a track.
middle of a track.
" Is the unit located near excessive
vibrations?
" Is the disc very dirty?
" Has condensation formed inside
" Has condensation formed inside
the unit?
Symptom
Possible cause
" Radio makes unusual
noise consecutively.
" Is the unit placed near the TV or
computer?
" Is the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead if
it's located nearby.
away from the AC power lead if
it's located nearby.
Symptom
Possible cause
" Cannot record.
" Is the erase-prevention tab re-
moved?
" Cannot record tracks with
proper sound quality.
" Is it a normal tape? (You cannot
record on a metal or CrO tape.)
" Cannot erase completely.
" Sound skipping.
" Sound skipping.
" Is there slack in the tape?
" Is the tape stretched?
" Is the tape stretched?
" Cannot hear treble.
" Are the capstans, pinch rollers,
or heads dirty?
" Sound fluctuation.
" Cannot remove the tape.
" Cannot remove the tape.
" If a power failure occurs during
playback, the heads remain en-
gaged with the tape. Do not open
the compartment with great
force.
gaged with the tape. Do not open
the compartment with great
force.
Click on the first or last page to see other XL-HP600 service manuals if exist.