DOWNLOAD Sharp XL-HP600 Service Manual ↓ Size: 1.37 MB | Pages: 32 in PDF or view online for FREE

03/1/31

XL-HP600E(E)3.fm

XL-HP600E

To stop playback:
Press the   (TAPE  ) button.

Fast forward/rewind on side A:
To advance the tape, press the 

 button. To rewind it, press the

 button.

Fast forward/rewind on side B:
To advance the tape, press the 

 button. To rewind it, press the

 button.

Caution:
! To remove the cassette, press the   (TAPE  ) button, and then

open the compartment.

! Before changing from one tape operation to another, press the 

(TAPE ) 

button.

! If a power failure occurs during tape operation, the tape head will

remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.

Before recording:
! When recording important selections, make a preliminary test to

ensure that the desired material is properly recorded.

! SHARP is not liable for damage or loss of your recording arising

from malfunction of this unit.

! The volume and sound controls can be adjusted with no effect on

the recorded signal (Variable Sound Monitor).

! For recording, use only normal tapes. Do not use metal or

Erase-prevention tab of cassette tapes:
! When recording on a cassette tape, 

make sure that the erase-prevention 
tabs are not removed. Cassettes have 
removable tabs that prevent accidental 
recording or erasing.

! To protect the recorded sound, remove 

the tab after recording. Cover the tab 
hole with adhesive tape to record on the 
tape without the tab.

Side A

Tab for 
side B

Tab for 
side A

03/1/31

XL-HP600E(E)3.fm

XL-HP600E

" Recording from a CD (CDs)  

You can record the desired CD using the DISC SELECT   -   (  1
-  

3) 

buttons.

Wind past the leader of the tape, on which recording cannot be 
performed.

...

To record on both sides.

...

To record on only one 
side.

Recording will be paused.

Press one of the DISC SELECT   -   (  1 -   3) buttons to
start recording.
! To record on both sides, begin with side A. (If recording is 

started from side B, the tape will not switch over to side A.)

! Recording is started from the selected CD. When the play-

back of the last track is finished or the end of the tape is 
reached, the CD and the cassette will stop automatically.

! CD playback will start approximately 7 seconds after the 

tape starts.

03/1/31

XL-HP600E(E)3.fm

XL-HP600E

To stop recording:
Press the   (TAPE  ) button.
The CD and tape will stop.

Auto restart function:
If the recording side is switched from side A to B during recording,
the system will record the interrupted track on side B from its begin-
ning. The recording will be made without cutting the beginning of the
track on side B.

" Recording from the radio

To interrupt recording:
Press the 

 button.

To resume recording, press the same recording button you pressed
in step 5. Other buttons do not allow resuming.

To stop recording:
Press 

the  

(TAPE ) 

button.

Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
 

" Erasing recorded tapes

1

Press the TAPE button.

2

Follow steps 2 - 5 in "Recording from the radio".

1 Perform steps 1 - 5 in "Recording from a CD (CDs)" on page 22.
2 Press the   /   ( ) button to record on side A, or the   button for 

side B.

1 Programme discs and tracks. (See page 17.)
2 Press the 

 button.

3 Press the   /   ( ) button to record on side A, or the   button for 

side B.

Wind past the leader of the tape, on which recording cannot be 
performed.

...

To record on both sides.

...

To record on only one 
side.

Recording will be paused.

To record on both sides, begin with side A. (If recording is start-
ed from side B, the tape will not switch over to side A.)

03/1/31

XL-HP600E(E)3.fm

XL-HP600E

Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at
the preset time.

Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.

Sleep operation:
The radio, compact disc and cassette tape can all be turned off
automatically.

" Timer playback or timer recording

1 Press the CLOCK button to check that the clock is set to the cor-

rect time. (Refer to page 13.)

2 For timer play-

back:

Load a cassette or discs to be played.

For timer re-
cording:

Load a cassette for recording in the cassette 
compartment.

To select the timer playback source:

Press CD, TUNER (BAND) or TAPE.

To select the timer recording source:

Press TUNER (BAND).

Do not turn the volume up too high.

White

Red