Sharp XL-DAB9H User Manual / Operation Manual ▷ View online
05/7/12
XL-DAB9H(E)2.fm
14
TINSEA068SJZZ
XL-DAB9H
Disc Playbac
k
Advanced disc playback
To select the desired folder or track by name
(CD-R/RW discs recorded in the MP3 or WMA
format only)
(CD-R/RW discs recorded in the MP3 or WMA
format only)
To locate the beginning of a track
Note:
You can skip to any track by pressing the
You can skip to any track by pressing the
or
button repeat-
edly until the desired track number appears.
To locate the desired portion
CD sound is heard except for CD-R/RW in the MP3 or WMA format.
(Check elapsed time on the display.)
(Check elapsed time on the display.)
Notes:
z
Normal playback will resume when the
or
button is
released.
z
When the end of the last track is reached during fast forward,
"END" will appear on the display and disc operation will be
paused. When the beginning of the first track is reached during
fast reverse, the disc will start playback automatically.
"END" will appear on the display and disc operation will be
paused. When the beginning of the first track is reached during
fast reverse, the disc will start playback automatically.
z
You can locate the desired portion by moving the operation lever
toward
toward
or .
To use the operation lever on the unit, move it to-
ward the corresponding directions.
1
Whilst in the stop mode, press the CD
DISPLAY button to display the folder
name.
DISPLAY button to display the folder
name.
2
Select the desired folder by pressing the
or
button.
3
Press the CD DISPLAY button to dis-
play the track name.
play the track name.
4
Select the desired track by pressing the
or
button.
5
Press the button to begin playback.
To move to the beginning of the next track:
Press the
button for less than 0.5 seconds during playback.
To restart the track being played:
Press the
button for less than 0.5 seconds during playback.
For fast forward:
Press and hold down the
button during playback.
For fast reverse:
Press and hold down the
button during playback.
4
05/7/12
XL-DAB9H(E)2.fm
15
TINSEA068SJZZ
XL-DAB9H
Disc Playbac
k
Advanced disc playback (continued)
Direct search of the track
By using the direct search buttons, the desired tracks can be
played.
played.
To stop playback:
Press the button.
Press the button.
Notes:
z
The selected track can be started simply by pressing the direct
search buttons during playback. (It is not necessary to press the
search buttons during playback. (It is not necessary to press the
button.)
z
A track number higher than the number of tracks on the disc can-
not be selected.
not be selected.
z
During random play, direct search is not possible.
z
For CD-R/RW discs recorded in the MP3 or WMA format, you
can select the track number but cannot select the folder by press-
ing the direct search buttons.
can select the track number but cannot select the folder by press-
ing the direct search buttons.
1
Whilst in the stop mode, use
the direct search buttons on
the remote control to select the
desired track.
the direct search buttons on
the remote control to select the
desired track.
Selected track number
z
The direct search buttons allow you to select up to number 9.
z
When selecting number 10 or higher, use the "+10" button.
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "3" button.
B. For example, to choose 30
1 Press the "+10" button three times.
2 Press the "0" button.
2
Press the button to start playback.
Playback of the selected track is started. When the last track on
the disc has finished playing, the unit will stop automatically.
the disc has finished playing, the unit will stop automatically.
05/7/12
XL-DAB9H(E)2.fm
16
TINSEA068SJZZ
XL-DAB9H
Disc Playbac
k
Repeat play
All tracks or a programmed sequence can be continuously
repeated.
repeated.
To cancel repeat play:
Press the REPEAT button again. " " will go out.
Press the REPEAT button again. " " will go out.
Caution:
After performing repeat play, be sure to press the button. Other-
wise, the disc will play continuously.
After performing repeat play, be sure to press the button. Other-
wise, the disc will play continuously.
Random play
The tracks can be played in random order automatically.
To cancel random play:
Whilst in the stop mode, press the RANDOM button again.
"Random" will go out.
Whilst in the stop mode, press the RANDOM button again.
"Random" will go out.
Notes:
z
When you press the RANDOM button during playback, the main
unit switches to random play.
unit switches to random play.
z
Random play will stop automatically when all tracks are played
once. (The same track will not be played back twice.)
once. (The same track will not be played back twice.)
z
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
(You cannot select the order of the tracks.)
z
If you press the
button during random play, you can move to
the next track by the random operation. On the other hand, the
button does not allow you to move to the previous track. The
beginning of the track being played will be located.
To repeat all tracks:
1
Press the REPEAT button.
2
Press the button.
To repeat a desired track:
1
Perform steps 1 - 3 in the "Programmed play" section on page
17 and then press the REPEAT button.
17 and then press the REPEAT button.
2
Press the button.
To repeat random play:
Press the REPEAT button during random play.
Whilst in the stop mode, press the
RANDOM button and the button se-
quentially to begin random play.
RANDOM button and the button se-
quentially to begin random play.
4
05/7/12
XL-DAB9H(E)2.fm
17
TINSEA068SJZZ
XL-DAB9H
Disc Playbac
k
Advanced disc playback (continued)
Programmed play
You can choose up to 32 selections for playback in the order you
like.
like.
To clear the programmed selections:
Whilst the "Memory" indicator is lit, set the CD to the stop mode and
then press the CLEAR button.
Each time the button is pressed, one track will be cleared, beginning
with the last track programmed. When all the tracks are cleared,
"Memory" will disappear.
Whilst the "Memory" indicator is lit, set the CD to the stop mode and
then press the CLEAR button.
Each time the button is pressed, one track will be cleared, beginning
with the last track programmed. When all the tracks are cleared,
"Memory" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "Memory" indicator
will be displayed. Then follow steps 1 - 2 to add tracks. The new
tracks will be stored after the last track of the original programme.
If a programme has been previously stored, the "Memory" indicator
will be displayed. Then follow steps 1 - 2 to add tracks. The new
tracks will be stored after the last track of the original programme.
Notes:
z
The programmed sequence is cancelled when the disc is
removed.
removed.
z
If you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the pro-
grammed selections will not be cleared.
mode or change the function from CD to another, the pro-
grammed selections will not be cleared.
z
During the programme operation, random play is not possible.
z
For CD-R/RW discs recorded in the MP3 or WMA format, you
can select the track number but cannot select the folder by press-
ing the direct search buttons.
can select the track number but cannot select the folder by press-
ing the direct search buttons.
1
Whilst in the stop mode, use the
direct search buttons to select the
desired track.
direct search buttons to select the
desired track.
Selected track number
You can also select a track by pressing the
or
button.
2
Press the MEMORY button to
save the track number.
save the track number.
Playback order
When the track is memorised, "Memory" will appear.
3
Repeat steps 1 - 2 for other tracks. Up to 32 tracks can be
programmed.
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
by pressing the CLEAR button.
4
Press the button to start playback.
To use the operation lever on the unit, move it
toward the corresponding directions.
toward the corresponding directions.
Click on the first or last page to see other XL-DAB9H service manuals if exist.