Sharp XL-DAB9H User Manual / Operation Manual ▷ View online
05/7/12
XL-DAB9H(E)1.fm
10
TINSEA068SJZZ
XL-DAB9H
Basic
Operati
o
n
Setting the clock
In this example, the clock is set for the 24-hour (0:00) display.
To confirm the time display:
Press the CLOCK button.
The time display will appear for about 8 seconds.
Press the CLOCK button.
The time display will appear for about 8 seconds.
Note:
The "0:00" or time will flash when the AC power supply is restored
after a power failure or unplugging the unit.
Readjust the clock as follows.
The "0:00" or time will flash when the AC power supply is restored
after a power failure or unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from the beginning. If the "0:00" is not
flashing in step 1, step 2 (for selecting the 24-hour or 12-hour dis-
play) will be skipped.
Perform "Setting the clock" from the beginning. If the "0:00" is not
flashing in step 1, step 2 (for selecting the 24-hour or 12-hour dis-
play) will be skipped.
To change the 24-hour or 12-hour display:
1
Press the CLOCK button and within 8 seconds, press the
MEMORY button.
MEMORY button.
2
Within 1 minute, press the PRESET ( or ) button to se-
lect 24-hour or 12-hour display and then press the MEMO-
RY button.
lect 24-hour or 12-hour display and then press the MEMO-
RY button.
"0:00"
The 24-hour display will appear.
(0:00
-
23:59)
"AM12:00"
The 12-hour display will appear.
(AM12:00
-
PM11:59)
3
Within 1 minute, press the PRESET ( or ) button to ad-
just the hour and then press the MEMORY button.
just the hour and then press the MEMORY button.
Press the PRESET ( or ) button once to advance the time
by 1 hour. Hold it down to advance continuously.
by 1 hour. Hold it down to advance continuously.
4
Within 1 minute, press the PRESET ( or ) button to ad-
just the minutes and then press the MEMORY button.
just the minutes and then press the MEMORY button.
Press the PRESET ( or ) button once to advance the time
by 1 minute. Hold it down to advance continuously.
by 1 minute. Hold it down to advance continuously.
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 37 for details.]
memory (reset)" on page 37 for details.]
2
Perform "Setting the clock" from the beginning.
3
05/7/12
XL-DAB9H(E)2.fm
11
TINSEA068SJZZ
XL-DAB9H
Disc Playbac
k
CD or MP3/WMA disc playback
This system can play back a standard CD, CD-R/RW in the CD for-
mat and CD-R/RW with MP3 or WMA files, but cannot record on
them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the equipment used for recording.
mat and CD-R/RW with MP3 or WMA files, but cannot record on
them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the equipment used for recording.
MP3:
MP3 is a form of compression. It is an acronym which stands for
MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant com-
pression from the original audio source with very little loss in sound
quality.
MP3 is a form of compression. It is an acronym which stands for
MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant com-
pression from the original audio source with very little loss in sound
quality.
z
The MP3 track indicator will light up when an MP3 track is read.
z
This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
VBR files.
z
During VBR file playback, time counter in the display may differ
from its actual playback time.
from its actual playback time.
z
Supported bit rates for MP3 files range from 64 kbps to 160 kbps.
WMA:
WMA files are ASF (Advanced Systems Format) audio files which
are compressed with Windows Media Audio codec. WMA is devel-
oped by Microsoft as an audio format file for Windows Media Player.
z
The WMA track indicator will light up when a WMA track is read.
z
Supported bit rates for WMA files range from 64 kbps to 160
kbps.
kbps.
05/7/12
XL-DAB9H(E)2.fm
12
TINSEA068SJZZ
XL-DAB9H
Disc Playbac
k
To stop playback:
Press the button.
Press the button.
To remove the disc:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "CD NO DISC" appears
on the display.
on the display.
When operating with the remote control, press the CD button.
3
Insert a disc into the disc slot with the label on the right.
z
The disc enters automatically.
Notes:
z
Do not push in the disc. Damage may result.
z
Load an 8 cm disc gently in the middle of the disc slot (do not
use an adaptor).
use an adaptor).
z
Due to the structure of the disc information, it takes longer to
read a CD-R/RW disc recorded in the MP3 or WMA format
than a normal CD.
read a CD-R/RW disc recorded in the MP3 or WMA format
than a normal CD.
Disc slot
Label side
Total number of tracks
Total number
of tracks
of tracks
[CD]
Total playing
time
time
WMA track indicator
[WMA]
Total number of tracks
MP3 track indicator
[MP3]
4
Press the
button to start playback from track 1.
When the last track on the disc has finished playing, the unit will
stop automatically.
stop automatically.
To interrupt playback:
Main unit operation:
Press the
Main unit operation:
Press the
button.
To resume playback, press the
button
again.
Remote control operation:
Press the button.
To resume playback, press the button.
Remote control operation:
Press the button.
To resume playback, press the button.
1
Press the button.
2
Remove the disc.
Disc play indicator
4
05/7/12
XL-DAB9H(E)2.fm
13
TINSEA068SJZZ
XL-DAB9H
Disc Playbac
k
CD or MP3/WMA disc playback (continued)
Caution:
z
Be careful not to damage the disc when inserting or removing it.
z
A disc does not play if damaged, dirty or loaded upside down.
z
Make sure to remove the disc before transporting the main unit.
Otherwise the disc inside may cause malfunction.
Otherwise the disc inside may cause malfunction.
z
Do not let coins, clips, etc. get into the disc slot. Malfunction may
occur.
occur.
z
Subjecting the unit to shock or vibration may cause mistracking.
z
If TV or radio interference occurs during disc operation, move the
unit away from it.
unit away from it.
To change the display (CD-R/RW discs
recorded in the MP3 or WMA format only)
recorded in the MP3 or WMA format only)
Whilst in the stop mode or playback mode, press the CD DISPLAY
button.
Each time the button is pressed, the display will change as follows.
button.
Each time the button is pressed, the display will change as follows.
[When in the stop mode]
z
To check the total number of tracks, press the button.
[When in the playback mode]
Caution when inserting disc:
z
Do not touch the playback side.
z
Do not insert two or more discs in the disc slot.
z
Discs with labels, stickers or glue attached
may cause damage to the main unit.
may cause damage to the main unit.
z
Do not use discs of special shapes (heart,
octagon, etc.) or 8 cm discs with an adaptor.
Malfunction may result.
octagon, etc.) or 8 cm discs with an adaptor.
Malfunction may result.
z
A disc with scratches or fingerprints may not play properly. Refer
to "Care of discs" (page 37) and clean the disc.
to "Care of discs" (page 37) and clean the disc.
z
Insert or remove the disc straight.
Otherwise, damage may result.
Otherwise, damage may result.
Total number
of tracks
of tracks
Folder name
Track name
1st track
Elapsed
playback
time
playback
time
Track
number
number
Folder name
Artist name
Title name
Album name
Track name
Click on the first or last page to see other XL-DAB9H service manuals if exist.