Sharp XL-570E User Manual / Operation Manual ▷ View online
■
Aerial connection
(1) Supplied FM aerial
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the direction
where the strongest signal can be received.
socket and position the FM aerial wire in the direction
where the strongest signal can be received.
(2) Supplied AM loop aerial
Connect the AM loop aerial wire to the AM LOOP
socket. Position the AM loop aerial for optimum re-
ception.
Place the AM loop aerial on a shelf, etc., or attach
it to a stand or wall with screws (not supplied).
socket. Position the AM loop aerial for optimum re-
ception.
Place the AM loop aerial on a shelf, etc., or attach
it to a stand or wall with screws (not supplied).
Notes:
●
Do not place the aerial on the main unit as it may
result in noise pickup from the internal digital elec-
tronics.
Place the aerial away from the unit for better re-
ception.
result in noise pickup from the internal digital elec-
tronics.
Place the aerial away from the unit for better re-
ception.
●
If the AM loop aerial and the FM aerial wire are
placed near the AC power lead, it may cause in-
terference in radio reception.
placed near the AC power lead, it may cause in-
terference in radio reception.
(3) External FM aerial
Use an external FM aerial if you need better recep-
tion.
Consult your dealer.
tion.
Consult your dealer.
ANTENNA
LOOP
FM
75
OHMS
1
2
3
(1)
(2)
FM aerial
AM loop
aerial
aerial
ANTENNA
LOOP
FM
75
OHMS
(3)
External FM aerial
(Continued)
■
Removing the speaker grilles
1
Remove the lower part of the speaker grille
first.
first.
2
Remove the upper part of the speaker grille.
Caution:
When the speaker grilles are removed, the
speaker diaphragms are exposed. Make sure
nothing comes into contact with the speaker di-
aphragms.
When the speaker grilles are removed, the
speaker diaphragms are exposed. Make sure
nothing comes into contact with the speaker di-
aphragms.
■
Mounting the speaker grilles
Fit the four posts on the speaker grille into the
mounting holes and push them lightly with the
palm of your hand to secure.
mounting holes and push them lightly with the
palm of your hand to secure.
XL-560E\XL-570E(SUK) TINSE0019SJZZ
4
■
Remote control
●
When inserting or removing the batteries, push
them towards the
them towards the
ë
battery terminals.
●
Installing the batteries incorrectly may cause the
unit to malfunction.
unit to malfunction.
Precautions for battery use:
●
Insert the batteries according to the direction indi-
cated in the battery compartment.
cated in the battery compartment.
●
Replace all old batteries with new ones at the
same time.
same time.
●
Do not mix old and new batteries.
●
Remove the batteries if they are weak or if the
unit will not be used for long periods of time. This
will prevent potential damage due to battery leak-
age.
unit will not be used for long periods of time. This
will prevent potential damage due to battery leak-
age.
Caution:
Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
Notes concerning use:
●
Replace the batteries if the operating distance is
reduced or if the operation becomes erratic.
reduced or if the operation becomes erratic.
●
Periodically clean the transmitter LED on the re-
mote control and the sensor on the main unit with
a soft cloth.
mote control and the sensor on the main unit with
a soft cloth.
●
Exposing the sensor on the main unit to strong
light may interfere with operation. Change the
lighting or the direction of the unit.
light may interfere with operation. Change the
lighting or the direction of the unit.
●
Keep the remote control away from moisture, ex-
cessive heat, shock, and vibrations.
cessive heat, shock, and vibrations.
●
2 "AA" size batteries
( U M / S U M - 3 , R 6 ,
HP-7 or similar)
( U M / S U M - 3 , R 6 ,
HP-7 or similar)
15
15
0.2 m - 6 m
(8" - 20")
(8" - 20")
(Continued)
●
Batteries are
not included.
not included.
■
Connecting the AC power lead
Connect the AC power lead to the AC power
input socket, then connect the AC power lead
plug to an AC socket.
input socket, then connect the AC power lead
plug to an AC socket.
Notes:
●
Unplug the AC power lead from the AC socket
if the unit is not to be used for a prolonged
period of time.
if the unit is not to be used for a prolonged
period of time.
●
Never use a power lead other than the one
supplied. Otherwise, a malfunction or an acci-
dent may occur.
supplied. Otherwise, a malfunction or an acci-
dent may occur.
AC 230 V, 50 Hz
To AC INPUT
To an AC socket
XL-560E\XL-570E(SUK) TINSE0019SJZZ
5
SOUND CONTROL
■
Volume
(Main unit operation)
When the VOLUME control is turned clockwise,
the volume will increase. When it is turned anti-
clockwise, the volume will decrease.
the volume will increase. When it is turned anti-
clockwise, the volume will decrease.
(Remote control operation)
Press the VOLUME button to increase the
volume and the VOLUME button to decrease
the volume.
volume and the VOLUME button to decrease
the volume.
●
The volume display can be changed within the
range of "MIN" to "MAX".
range of "MIN" to "MAX".
VOLUME / MULTI JOG
D
O
W
N
PRESET
U
P
C
D
C
D
(Main unit)
(Remote control)
MIN 1 2 28 29 MAX
■
Bass
(Main unit operation)
1
Press the BASS/TREBLE button to select
"BASS".
"BASS".
2
Turn the jog dial to adjust the bass.
●
The bass level can be changed within the
range of "-2" to "5".
range of "-2" to "5".
(Remote control operation)
Press the BASS ( or ) button to adjust the
bass.
bass.
VOLUME / MULTI JOG
D
O
W
N
PRESET
U
P
CD
CD
(Main unit)
(Remote control)
-2 -1 3 4 5
■
Treble
(Main unit operation)
1
Press the BASS/TREBLE button to select
"TRE".
"TRE".
2
Turn the jog dial to adjust the treble.
●
The treble level can be changed within the
range of "-1" to "2".
range of "-1" to "2".
(Remote control operation)
Press the TREBLE ( or ) button to adjust
the treble.
the treble.
VOLUME / MULTI JOG
D
O
W
N
PRESET
U
P
C
D
C
D
(Main unit)
(Remote control)
-1 0 1 2
XL-560E/XL-570E(SUK) TINSE0019SJZZ
6
SETTING THE CLOCK
In this example, the clock is set for the 24-hour
(0:00) system.
(0:00) system.
1
Press the CLOCK/TIMER/SLEEP button to enter
the time check mode.
the time check mode.
2
Within 3 seconds, press the MEMORY/SET but-
ton.
ton.
3
Turn the jog dial to select the time display mode.
"0:00"
"0:00"
→
The 24-hour display will appear.
(0:00 - 23:59)
(0:00 - 23:59)
"AM 12:00"
→
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
●
Note that this can only be set when the unit is first
installed or it has been reset (see page 17).
installed or it has been reset (see page 17).
4
Press the MEMORY/SET button.
5
Adjust the hour by turning the jog dial.
●
When the jog dial is turned one click clockwise,
the time will increase by 1 hour. When it is turned
one click anti-clockwise, the time will decrease by
1 hour.
Keep turning the jog dial to change the time con-
tinuously.
the time will increase by 1 hour. When it is turned
one click anti-clockwise, the time will decrease by
1 hour.
Keep turning the jog dial to change the time con-
tinuously.
●
When the 12-hour display is selected, "AM" will
change automatically to "PM".
change automatically to "PM".
6
Press the MEMORY/SET button.
7
Adjust the minutes by turning the jog dial.
●
When the jog dial is turned one click clockwise,
the time will increase by 1 minute. When it is
turned one click anti-clockwise, the time will de-
crease by 1 minute.
Keep turning the jog dial to change the time con-
tinuously.
the time will increase by 1 minute. When it is
turned one click anti-clockwise, the time will de-
crease by 1 minute.
Keep turning the jog dial to change the time con-
tinuously.
●
The hour setting will not advance even if minutes
advance from "59" to "00".
advance from "59" to "00".
8
Press the MEMORY/SET button.
●
The clock starts operating from "0" seconds. (Sec-
onds are not displayed.)
onds are not displayed.)
Note:
●
In the event of a power failure or when the AC
power lead is disconnected, the clock display will
go out.
When the AC power supply is restored, the clock
display will flash on and off to indicate the time
when the power failure occurred or when the AC
power lead was disconnected.
If this happens, follow the procedure below to
change the clock time.
power lead is disconnected, the clock display will
go out.
When the AC power supply is restored, the clock
display will flash on and off to indicate the time
when the power failure occurred or when the AC
power lead was disconnected.
If this happens, follow the procedure below to
change the clock time.
To change the clock time:
Perform steps 1, 2 and 5 - 8 above.
To change the time display mode:
1
Perform steps 1 - 3 in the section "RESETTING
THE MICROCOMPUTER", on page 17.
THE MICROCOMPUTER", on page 17.
2
Perform steps 1 - 8 above.
MEMORY/
SET
CLOCK/TIMER/
SLEEP
SLEEP
Jog dial
(Main unit operation)
0:00 AM 12:00
2
3
4
5
6
7
8
XL-560E/XL-570E(SUK) TINSE0019SJZZ
7
Click on the first or last page to see other XL-570E service manuals if exist.