Sharp XL-570E User Manual / Operation Manual ▷ View online
(Continued)
■
Sleep operation
The radio, compact disc and cassette deck can
all be turned off automatically.
all be turned off automatically.
■
Simultaneous sleep and timer op-
eration
eration
(Main unit operation)
1
Play back the desired sound source.
2
Press the CLOCK/TIMER/SLEEP button re-
peatedly until "SLEEP" is displayed.
peatedly until "SLEEP" is displayed.
3
Within 5 seconds, press the MEMORY/SET
button.
button.
4
Turn the jog dial to set the time.
(Maximum 3 hours - Minimum 5 minutes, 5-
minute intervals)
(Maximum 3 hours - Minimum 5 minutes, 5-
minute intervals)
OFF
↔
5 minutes ....
↔
3 hours
5
Press the MEMORY/SET button.
6
The unit will enter the stand-by mode auto-
matically after the preset sleep time has
elapsed.
(The volume will gradually decrease one min-
ute before the preset sleep time expires.)
matically after the preset sleep time has
elapsed.
(The volume will gradually decrease one min-
ute before the preset sleep time expires.)
To confirm the remaining sleep time:
Press the CLOCK/TIMER/SLEEP button three
times.
times.
(Remote control operation)
1
Play back the desired sound source.
2
Press the SLEEP button.
●
The sleep timer is initially set to 3 hours.
To change the sleep time:
Press the SLEEP button repeatedly to select the
desired sleep time. The time will decrease as fol-
lows.
desired sleep time. The time will decrease as fol-
lows.
●
The amount of sleep time can also be changed
whilst in the sleep mode.
whilst in the sleep mode.
3 hours
2 hours
1 hour 30 minutes
1 hour
30 minutes
15 minutes
OFF
3
The unit will enter the stand-by mode auto-
matically after the preset sleep time has
elapsed.
(The sound volume will be reduced one min-
ute before the preset sleep time expires.)
matically after the preset sleep time has
elapsed.
(The sound volume will be reduced one min-
ute before the preset sleep time expires.)
To confirm the remaining sleep time:
Press the SLEEP button once.
To cancel the sleep operation:
Press the ON/STAND-BY button to enter the
stand-by mode.
stand-by mode.
1
Prepare for timer playback.
(Perform steps 1 - 6 on page 15)
(Perform steps 1 - 6 on page 15)
2
Press the SLEEP button repeatedly to select
the desired sleep time.
the desired sleep time.
3
Play the desired item (compact disc, tape,
etc.).
etc.).
4
When the preset sleep time has elapsed, the
unit will automatically enter the stand-by
mode.
unit will automatically enter the stand-by
mode.
5
When the timer preset time is reached, timer
playback will start.
playback will start.
Caution:
●
Be sure your tape length is long enough to
perform both functions.
If you want to go to sleep and wake up listen-
ing to a tape, and the length of the tape is
shorter than the sleep timer setting, timer play-
back will not be possible.
perform both functions.
If you want to go to sleep and wake up listen-
ing to a tape, and the length of the tape is
shorter than the sleep timer setting, timer play-
back will not be possible.
2
3,5
4
SLEEP
XL-560E/XL-570E(SUK) TINSE0019SJZZ
16
USING EXTERNAL UNITS
●
Before plugging in or unplugging the headphones,
make sure the volume level is reduced.
make sure the volume level is reduced.
●
Be sure your headphones have a 3.5 mm (1/8")
diameter plug and are between 16 ohms and 50
ohms impedance. The recommended impedance
is 32 ohms.
diameter plug and are between 16 ohms and 50
ohms impedance. The recommended impedance
is 32 ohms.
●
When headphones are connected, the speakers
are disconnected automatically. Adjust the VOL-
UME control for desired volume.
are disconnected automatically. Adjust the VOL-
UME control for desired volume.
■
Headphones
RESETTING THE MICRO-
COMPUTER
COMPUTER
Reset the microcomputer under the following
conditions:
conditions:
●
To erase all of the stored memory contents (clock
and timer settings, and tuner and CD presets).
and timer settings, and tuner and CD presets).
●
If the display is not correct.
●
If the operation is not correct.
1
Press the ON/STAND-BY button to enter the
stand-by mode.
stand-by mode.
2
Unplug the AC power lead from the AC INPUT
socket on this unit.
socket on this unit.
3
Whilst pressing down the MEMORY/SET button
and the BASS/TREBLE button, plug the AC
power lead into the AC INPUT socket on this unit.
and the BASS/TREBLE button, plug the AC
power lead into the AC INPUT socket on this unit.
Caution:
●
The operation explained above will erase all data
stored in memory, such as clock and timer set-
tings, and tuner and CD presets.
stored in memory, such as clock and timer set-
tings, and tuner and CD presets.
1
3
3
2,3
■
VIDEO/AUX (Audio signal) input
External unit
To listen to or record signals from external sources
through this unit:
through this unit:
1
Use an RCA lead to connect the desired external unit
to the VIDEO/AUX sockets.
(red
to the VIDEO/AUX sockets.
(red
→
right channel, white
→
left channel)
●
When using video equipment (Laser Disc player, VCR),
be sure to connect the audio output to this unit and the
video output to a television.
be sure to connect the audio output to this unit and the
video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the FUNCTION button until "AUX" appears in the
display.
display.
4
Operate the external unit.
5
To record the sound from the external unit, perform
steps 2 - 4 of the "Recording from the built-in radio"
section on page 14.
steps 2 - 4 of the "Recording from the built-in radio"
section on page 14.
Note:
●
To prevent hum interference, do not place this unit near
television receivers.
television receivers.
■
CD digital output (optical)
The CD digital signal from this unit can be recorded by
other DAT or MiniDisc recorders.
other DAT or MiniDisc recorders.
1
Remove the DIGITAL OUT socket cover.
2
Use a commercially available digital cable to connect
the unit to the OPTICAL IN socket of a MiniDisc recorder
or a DAT.
the unit to the OPTICAL IN socket of a MiniDisc recorder
or a DAT.
3
Put the external unit in the recording mode.
4
Play a CD on this unit.
Note:
●
Only CD signals can be output.
Commercially available digital cable
XL-560E/XL-570E(SUK) TINSE0019SJZZ
17
SPECIFICATIONS
As a part of our policy of continuous improve-
ment, SHARP reserves the right to make de-
sign and specification changes for product
improvement without prior notice. The perfor-
mance specification figures indicated are nom-
inal values of production units. There may be
some deviations from these values in individual
units.
ment, SHARP reserves the right to make de-
sign and specification changes for product
improvement without prior notice. The perfor-
mance specification figures indicated are nom-
inal values of production units. There may be
some deviations from these values in individual
units.
■
Main unit
●
General
Power source:
AC 230 V, 50 Hz
Power
consumption:
consumption:
Stand-by; 0.6 W
Power on; 50 W
Power on; 50 W
Dimensions:
Width; 160 mm (6-5/16")
Height; 241 mm (9-1/2")
Depth; 249 mm (9-13/16")
Height; 241 mm (9-1/2")
Depth; 249 mm (9-13/16")
Weight:
3.3 kg (7.3 lbs.)
●
Amplifier section
Output power:
RMS; 40 W (20 W + 20
W)
(10 % T.H.D.)
W)
(10 % T.H.D.)
Output terminals:
Speakers; 4 ohms
Headphones; 16-50 ohms
(recommended; 32 ohms)
Headphones; 16-50 ohms
(recommended; 32 ohms)
Input terminals:
Video/Auxiliary (audio sig-
nal); 500 mV/47 kohms
nal); 500 mV/47 kohms
●
Tuner section
Frequency range:
FM; 87.5-108 MHz
AM; 522-1,620 kHz
AM; 522-1,620 kHz
●
Compact disc player section
Type:
Compact disc player
Signal readout:
Non-contact, 3-beam semi-
conductor laser pickup
conductor laser pickup
D/A converter:
1-bit D/A converter
Filter:
8-times oversampling digi-
tal filter
tal filter
Frequency
response:
response:
20 - 20,000 Hz
Wow and flutter:
Unmeasurable (less than
0.001% W. peak)
0.001% W. peak)
●
Cassette deck section
Frequency
response:
response:
50 - 14,000 Hz (Normal
tape)
tape)
Signal/noise ratio: 50 dB
Wow and flutter:
Wow and flutter:
0.25 % (WRMS)
■
Speaker
MAINTENANCE
■
Internal care
●
Do not touch the Laser pickup lens. If finger-
prints or dust accumulate on the pickup, clean
it gently with a dry cotton swab.
prints or dust accumulate on the pickup, clean
it gently with a dry cotton swab.
●
Dirty heads, capstan or pinch roller can cause
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
●
After long use, the deck’s heads and capstan
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording time by using a commer-
cia l tap e head demagnetiser. Read the
demagnet-iser’s instructions carefully before
use.
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording time by using a commer-
cia l tap e head demagnetiser. Read the
demagnet-iser’s instructions carefully before
use.
■
External care
●
Periodically wipe the cabinet with a soft cloth
and a diluted soap solution, then wipe with a
dry cloth.
and a diluted soap solution, then wipe with a
dry cloth.
●
Do not use chemically treated cleaning cloths
or other chemicals.
or other chemicals.
XL-CP560H
Type:
2-way [10 cm (4") woofer
and 1.5 cm (1/16")
tweeter]
and 1.5 cm (1/16")
tweeter]
Rated input
power:
power:
20 W
Maximum input
power:
power:
40 W
Impedance:
4 ohms
Dimensions:
Width; 160 mm (6-5/16")
Height; 240 mm (9-1/2")
Depth; 189 mm (7-7/16")
Height; 240 mm (9-1/2")
Depth; 189 mm (7-7/16")
Weight:
1.8 kg (4.0 lbs.)/each
XL-CP570H
Type:
2-way [12 cm (4-3/4")
woofer and 2.5 cm (1")
tweeter]
woofer and 2.5 cm (1")
tweeter]
Rated input
power:
power:
20 W
Maximum input
power:
power:
40 W
Impedance:
4 ohms
Dimensions:
Width; 160 mm (6-5/16")
Height; 240 mm (9-1/2")
Depth; 189 mm (7-7/16")
Height; 240 mm (9-1/2")
Depth; 189 mm (7-7/16")
Weight:
2.2 kg (4.9 lbs.)/each
XL-560E/XL-570E(SUK) TINSE0019SJZZ
18
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. ("Sharp") guarantees to provide for the repair, or at its option the
replacement, of this product subject to the conditions listed below:-
replacement, of this product subject to the conditions listed below:-
1. This guarantee shall only apply to faults which are due to inferior workmanship or materials.
It does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect,
tampering with the product, or repair other than by a Service Facility appointed by Sharp.
tampering with the product, or repair other than by a Service Facility appointed by Sharp.
2. As this product is intended for private domestic use only, the guarantee will not apply if the
product is used in the course of a business, trade or profession.
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its
appointed Service Facility within one year from the date this product was purchased. Proof
of purchase must be provided.
of purchase must be provided.
4. The guarantee does not cover carriage costs, jewelled styli, audio tapes, compact discs or
batteries.
5. In the unlikely event of this product requiring repair, please contact the supplier from whom
it was purchased. Where this is not possible, please contact the Sharp Customer Information
Centre on the telephone number given below.
Centre on the telephone number given below.
6. No person has any authority to vary the terms or conditions of this guarantee.
7. This guarantee is offered as an additional benefit to your statutory rights, and does not affect
these rights in any way.
If you have any difficulty operating this product, or would like information or other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.
please telephone the Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 0345 125387
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
TINSE0019SJZZ
A9902.SM
