Sharp XL-530H User Manual / Operation Manual ▷ View online
(Continued)
■
APSS (Auto Program Search System)
APSS automatically locates the beginning of any
track.
track.
To listen again to the track being played:
(Main unit operation)
1
Press the VOLUME/JOG button.
●
The track number will flash.
2
Whilst the track number is flashing, turn the
jog dial anti-clockwise.
jog dial anti-clockwise.
(Remote control operation)
Press the
5
3
button for less than 0.5 sec-
onds during playback.
To move to the beginning of the next track:
(Main unit operation)
1
Press the VOLUME/JOG button.
●
The track number will flash.
2
Whilst the track number is flashing, turn the
jog dial clockwise.
jog dial clockwise.
(Remote control operation)
Press the
2
4
button for less than 0.5 sec-
onds during playback.
●
To skip a number of tracks at one time, press
the
the
5 3
or
2 4
button on the remote
control repeatedly until the desired track num-
ber is shown.
ber is shown.
●
To start playing at a desired track, press the
5 3
or
2 4
button on the remote con-
trol whilst in the stop mode to select the track
number, and then press the
number, and then press the
0
/ CD
6
(
0 6
)
button.
■
Cue and review
1
Load a disc and begin playback.
2
Hold the
2
button down for audible fast for-
ward, and hold the
3
button down for audi-
ble fast reverse.
3
Normal playback will resume when the
2
or
3
button is released.
Notes:
●
When the end of the disc is reached whilst
cueing, the "End" will appear in the display and
CD operation is paused. Press the
cueing, the "End" will appear in the display and
CD operation is paused. Press the
■
button
to stop CD operation.
●
If the beginning of the disc is reached whilst
reviewing, the mode will automatically switch
to normal playback at that point.
reviewing, the mode will automatically switch
to normal playback at that point.
■
Repeat and random play
(Remote control operation)
1
Press the RANDOM/REPEAT button.
●
Each time this button is pressed, the mode will
change in the following order:
change in the following order:
Repeat play
Random play
Normal play
2
Press the
0
/ CD
6
(
0 6
) button to start
playback.
To cancel repeat or random play:
Press the RANDOM/REPEAT button until "
R
" or
"RANDOM" disappears.
To repeat playback of selected tracks:
After entering the programme for the tracks you
want to hear using "APMS", select repeat play
and start playback.
want to hear using "APMS", select repeat play
and start playback.
Notes:
●
When using random play or repeat play, be
sure to press the
sure to press the
■
button after you are
through listening. Otherwise, the disc will play
continuously.
continuously.
●
During APMS operation, random play is not
possible.
possible.
RANDOM/
REPEAT
VOLUME
/JOG
Jog dial
XL-530E(SUK) TINSE0017SJZZ
8
Caution:
●
Do not open the CD compartment during play-
back (or whilst paused).
back (or whilst paused).
●
If the disc is damaged, dirty, or loaded upside
down, "no dISC" or "READ ERR" will appear in
the display.
Clean, replace, or reload the disc properly.
down, "no dISC" or "READ ERR" will appear in
the display.
Clean, replace, or reload the disc properly.
●
Keep foreign objects out of the CD compart-
ment.
ment.
●
Subjecting the unit to shock or vibration may
cause mistracking.
cause mistracking.
●
When the unit is not being used, be sure to
close the CD compartment. If it is left open, the
lens may become covered with dust and the unit
may not operate properly.
close the CD compartment. If it is left open, the
lens may become covered with dust and the unit
may not operate properly.
●
Playing certain compact discs at a high volume
may cause mistracking. In this case, listen at a
lower volume.
may cause mistracking. In this case, listen at a
lower volume.
●
If TV or radio interference occurs during CD op-
eration, move the unit away from the TV or
radio.
eration, move the unit away from the TV or
radio.
(Continued)
■
APMS (Automatic Programmable
Music Selector)
Music Selector)
●
The CD can be programmed to play the tracks
in any order, or skip certain tracks.
in any order, or skip certain tracks.
1
Load a compact disc and close the CD com-
partment.
partment.
2
Press the MEMORY/SET (MEMORY) button
to prepare for programming.
to prepare for programming.
●
"MEMORY" will flash.
3
Within 30 seconds, turn the jog dial on the
main unit or press the
main unit or press the
3
/
5
or
2
/
4
button on the remote control to select the de-
sired track.
sired track.
4
Press the MEMORY/SET (MEMORY) button.
●
The selected track number and the pro-
grammed playback order will be displayed.
grammed playback order will be displayed.
●
After 2 seconds, the total playing time of the
programmed tracks will be displayed automat-
ically.
programmed tracks will be displayed automat-
ically.
5
Repeat steps 3 - 4 for any other track Up to
20 tracks can be programmed.
20 tracks can be programmed.
●
If you make a mistake whilst in the program-
ming mode (when MEMORY is flashing) or if
you change your mind, the programmed tracks
can be cleared by pressing the CLEAR button
on the remote control. The tracks will be
cleared sequentially starting with the last en-
tered track.
ming mode (when MEMORY is flashing) or if
you change your mind, the programmed tracks
can be cleared by pressing the CLEAR button
on the remote control. The tracks will be
cleared sequentially starting with the last en-
tered track.
6
Press the
0
/ CD
6
(
0 6
) button to start
playback of programmed selections.
To clear all the programmed selections:
To cancel a programmed sequence, press the
CLEAR button on the remote control whilst the
disc is stopped and the "MEMORY" indicator is
lit.
CLEAR button on the remote control whilst the
disc is stopped and the "MEMORY" indicator is
lit.
Notes:
●
Opening the CD compartment automatically
cancels the programmed sequence.
cancels the programmed sequence.
●
Even if you press the ON/STAND-BY button to
enter the stand-by mode or the function is
changed from CD to some other function, the
programmed selections will not be cleared.
enter the stand-by mode or the function is
changed from CD to some other function, the
programmed selections will not be cleared.
●
Programming is not possible during CD play-
back. It must be performed whilst the CD is
stopped.
back. It must be performed whilst the CD is
stopped.
●
When in the random play mode (whilst "RAN-
DOM" is lit), programming is not possible.
To perform some programming, cancel the ran-
dom play mode.
DOM" is lit), programming is not possible.
To perform some programming, cancel the ran-
dom play mode.
Selected track number
Playback order
Total playing time
CLEAR
2,4
3
1
6
2,4
6
3
3
XL-530E(SUK) TINSE0017SJZZ
9
CASSETTE OPERATION
■
Cassette tape
●
For playback, use normal or low-noise tape for
the best sound. (Metal or CrO
the best sound. (Metal or CrO
2
tape is not rec-
ommended.)
For recording, use only normal tape.
For recording, use only normal tape.
●
Do not use C-120 tapes, tapes with large di-
ameter reels, or poor-quality tapes, as they
may cause malfunctions.
ameter reels, or poor-quality tapes, as they
may cause malfunctions.
●
Before loading a tape into the cassette com-
partment, tighten the slack with a pen or pencil.
partment, tighten the slack with a pen or pencil.
●
Cassettes have removable tabs which prevent
accidental recording or erasing from taking
place. Removing the tab will protect the corre-
sponding side from being erased. Cover the
tab holes with adhesive tape to erase or record
again.
accidental recording or erasing from taking
place. Removing the tab will protect the corre-
sponding side from being erased. Cover the
tab holes with adhesive tape to erase or record
again.
■
Tape playback
1
Press the ON/STAND-BY button to turn the
power on.
power on.
2
Press the FUNCTION button until "TP" ap-
pears in the display.
pears in the display.
●
Press the TAPE button on the remote control.
3
Open the cassette door by pushing the area
marked "
marked "
7
PUSH EJECT".
4
Load the cassette into the cassette compart-
ment.
ment.
5
Press the
0
button.
To stop playback:
Press the
■
button.
Fast forward/rewind:
To advance the tape, press the
■
button, then
press the
2
button. To rewind, press the
■
but-
ton, then press the
3
button.
Caution:
●
When removing the cassette tape, press the
■
button, and then open the cassette compart-
ment.
●
Before changing from one tape operation to
another, press the
another, press the
■
button.
●
If a power failure occurs during tape operation,
the tape head will remain engaged with the
tape and the cassette door will not open. In
this case, wait until power is restored.
the tape head will remain engaged with the
tape and the cassette door will not open. In
this case, wait until power is restored.
●
Even if the
0
button is pressed during tape
playback, the unit will not enter the pause
mode.
mode.
Side A (1)
Tab for side B (2)
Tab for side A (1)
1
2
5
1
5
2
4
3
XL-530E(SUK) TINSE0017SJZZ
10
RADIO OPERATION
■
Tuning
1
Press the ON/STAND-BY button to turn the
power on.
power on.
2
Press the FUNCTION button until "FM" or "AM"
appears in the display.
appears in the display.
3
Press the BAND button to select the desired fre-
quency band. (FM ST, FM or AM)
quency band. (FM ST, FM or AM)
4
Press the TUNING (
X
or
W
) button to tune in
to the desired station.
Manual tuning:
Press the TUNING (
X
or
W
) button as many times
as required to adjust the frequency shown on the
display to the frequency of the desired station.
display to the frequency of the desired station.
Auto tuning:
When the TUNING (
X
or
W
) button is pressed for
more than 0.5 seconds, scanning will start automat-
ically and the tuner will stop at the first receivable
broadcast station.
ically and the tuner will stop at the first receivable
broadcast station.
Notes:
●
When radio interference occurs during auto scan
tuning, auto scan tuning may stop automatically at
that point.
tuning, auto scan tuning may stop automatically at
that point.
●
If a weak station signal is found during auto scan
tuning, the station will be skipped.
tuning, the station will be skipped.
●
To stop the auto tuning, press the TUNING (
X
or
W
) button again.
5
To receive an FM stereo transmission, press the
BAND button so that the "ST" indicator on the
display lights up.
BAND button so that the "ST" indicator on the
display lights up.
●
"
j
" will appear when an FM broadcast is in ste-
reo.
6
If the FM reception is weak, press the BAND but-
ton so that the "ST" indicator goes out.
ton so that the "ST" indicator goes out.
●
The reception changes to monaural, the sound be-
comes clearer.
comes clearer.
Note:
●
The last station tuned in will be recalled, even after
changing the tuning band or the function, or after
switching the unit to the stand-by mode.
changing the tuning band or the function, or after
switching the unit to the stand-by mode.
■
Preset tuning
You can store up to 30 stations in memory (30
stations consisting of any combination of FM and
AM stations you like) and recall them at the push
of a button.
stations consisting of any combination of FM and
AM stations you like) and recall them at the push
of a button.
To enter stations into memory:
1
Perform steps 1 - 6 in the "Tuning" section.
2
Press the MEMORY/SET button.
●
"MEMORY" will flash.
3
Within 5 seconds, turn the jog dial to make
the preset channel number flash in the dis-
play.
the preset channel number flash in the dis-
play.
●
Store the stations in memory, in order, starting
with preset channel 1.
with preset channel 1.
4
Within 5 seconds, press the MEMORY/SET
button to store that station in the selected sta-
tion preset number memory.
button to store that station in the selected sta-
tion preset number memory.
●
If the "MEMORY" and preset number indicators
go out before the station is memorised, repeat
the operation from step 2.
go out before the station is memorised, repeat
the operation from step 2.
5
Repeat steps 1 - 4 to set other preset stations,
or to change a preset station.
or to change a preset station.
After use:
Press the ON/STAND-BY button to enter the
stand-by mode.
stand-by mode.
1
2
3,5,6
4
(Main unit operation)
2,4
3
(Main unit operation)
XL-530E(SUK) TINSE0017SJZZ
11
Click on the first or last page to see other XL-530H service manuals if exist.