Sharp XL-530H User Manual / Operation Manual ▷ View online
(Continued)
■
Connecting the AC power lead
Connect the AC power lead to the AC power
input socket, then connect the AC power lead
plug to an AC socket.
input socket, then connect the AC power lead
plug to an AC socket.
Notes:
●
Unplug the AC power lead from the AC socket
if the unit is not to be used for a prolonged
period of time.
if the unit is not to be used for a prolonged
period of time.
●
Never use a power lead other than the one
supplied. Otherwise, a malfunction or an acci-
dent may occur.
supplied. Otherwise, a malfunction or an acci-
dent may occur.
■
Remote control
●
When inserting or removing the batteries, push
them towards the
them towards the
ë
battery terminals.
●
Installing the batteries incorrectly may cause
the unit to malfunction.
the unit to malfunction.
Precautions for battery use:
●
Insert the batteries according to the direction
indicated in the battery compartment.
indicated in the battery compartment.
●
Replace all old batteries with new ones at the
same time.
same time.
●
Do not mix old and new batteries.
●
Remove the batteries if they are weak or if the
unit will not be used for long periods of time.
This will prevent potential damage due to bat-
tery leakage.
unit will not be used for long periods of time.
This will prevent potential damage due to bat-
tery leakage.
Caution:
Do not use rechargeable batteries (nickel-cad-
mium battery, etc.).
Notes concerning use:
Do not use rechargeable batteries (nickel-cad-
mium battery, etc.).
Notes concerning use:
●
Replace the batteries if the operating distance is
reduced or if the operation becomes erratic.
reduced or if the operation becomes erratic.
●
Periodically clean the transmitter LED on the re-
mote control and the sensor on the main unit with
a soft cloth.
mote control and the sensor on the main unit with
a soft cloth.
●
Exposing the sensor on the main unit to strong
light may interfere with operation. Change the
lighting or the direction of the unit.
light may interfere with operation. Change the
lighting or the direction of the unit.
●
Keep the remote control away from moisture, ex-
cessive heat, shock, and vibrations.
cessive heat, shock, and vibrations.
AC 230 V, 50 Hz
To AC INPUT
To an AC socket
●
2 "AA" size batteries
( U M / SU M - 3 , R 6 ,
HP-7 or similar)
( U M / SU M - 3 , R 6 ,
HP-7 or similar)
15
15
0.2 m - 6 m
(8" - 20")
(8" - 20")
●
Batteries are
not included.
not included.
XL-530E(SUK) TINSE0017SJZZ
4
SOUND CONTROL
■
Volume
(Main unit operation)
When the VOLUME control is turned clockwise,
the volume will increase. When it is turned anti-
clockwise, the volume will decrease.
the volume will increase. When it is turned anti-
clockwise, the volume will decrease.
(Remote control operation)
Press the VOLUME button to increase the
volume and the VOLUME button to decrease
the volume.
volume and the VOLUME button to decrease
the volume.
●
The volume display can be changed within the
range of "0" to "30".
range of "0" to "30".
■
Bass
(Main unit operation)
1
Press the BASS/TREBLE button to select
"BASS".
"BASS".
2
Turn the jog dial to adjust the bass.
●
The bass level can be changed within the
range of "-2" to "5".
range of "-2" to "5".
(Remote control operation)
Press the BASS ( or ) button to adjust the
bass.
bass.
■
Treble
(Main unit operation)
1
Press the BASS/TREBLE button to select
"TrE".
"TrE".
2
Turn the jog dial to adjust the treble.
●
The treble level can be changed within the
range of "-1" to "2".
range of "-1" to "2".
(Remote control operation)
Press the TREBLE ( or ) button to adjust
the treble.
the treble.
VOLUME / MULTI JOG
D
O
W
N
PRESET
U
P
CD
CD
(Main unit)
(Remote control)
0 1 2 28 29 30
VOLUME / MULTI JOG
D
O
W
N
PRESET
U
P
CD
CD
(Main unit)
(Remote control)
-2 -1 3 4 5
VOLUME / MULTI JOG
D
O
W
N
PRESET
U
P
C
D
C
D
(Main unit)
(Remote control)
-1 0 1 2
XL-530E(SUK) TINSE0017SJZZ
5
SETTING THE CLOCK
In this example, the clock is set for the 24-hour
(0:00) system.
(0:00) system.
1
Press the CLOCK/TIMER/SLEEP button to enter
the time check mode.
the time check mode.
2
Within 3 seconds, press the MEMORY/SET but-
ton.
ton.
3
Turn the jog dial to select the time display mode.
"0:00"
"0:00"
→
The 24-hour display will appear.
(0:00 - 23:59)
(0:00 - 23:59)
"AM 12:00"
→
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
●
Note that this can only be set when the unit is first
installed or it has been reset (see page 16).
installed or it has been reset (see page 16).
4
Press the MEMORY/SET button.
5
Adjust the hour by turning the jog dial.
●
When the jog dial is turned one click clockwise,
the time will increase by 1 hour. When it is turned
one click anti-clockwise, the time will decrease by
1 hour.
Keep turning the jog dial to change the time con-
tinuously.
the time will increase by 1 hour. When it is turned
one click anti-clockwise, the time will decrease by
1 hour.
Keep turning the jog dial to change the time con-
tinuously.
●
When the 12-hour display is selected, "AM" will
change automatically to "PM".
change automatically to "PM".
6
Press the MEMORY/SET button.
7
Adjust the minutes by turning the jog dial.
●
When the jog dial is turned one click clockwise,
the time will increase by 1 minute. When it is
turned one click anti-clockwise, the time will de-
crease by 1 minute.
Keep turning the jog dial to change the time con-
tinuously.
the time will increase by 1 minute. When it is
turned one click anti-clockwise, the time will de-
crease by 1 minute.
Keep turning the jog dial to change the time con-
tinuously.
●
The hour setting will not advance even if minutes
advance from "59" to "00".
advance from "59" to "00".
8
Press the MEMORY/SET button.
●
The clock starts operating from "0" seconds. (Sec-
onds are not displayed.)
onds are not displayed.)
Note:
●
In the event of a power failure or when the AC
power lead is disconnected, the clock display will
go out.
When the AC power supply is restored, the clock
display will flash on and off to indicate the time
when the power failure occurred or when the AC
power lead was disconnected.
If this happens, follow the procedure below to
change the clock time.
power lead is disconnected, the clock display will
go out.
When the AC power supply is restored, the clock
display will flash on and off to indicate the time
when the power failure occurred or when the AC
power lead was disconnected.
If this happens, follow the procedure below to
change the clock time.
To change the clock time:
Perform steps 1, 2 and 5 - 8 above.
To change the time display mode:
1
Perform steps 1 - 3 in the section "RESETTING
THE MICROCOMPUTER", on page 16.
THE MICROCOMPUTER", on page 16.
2
Perform steps 1 - 8 above.
CLOCK/TIMER/
SLEEP
SLEEP
MEMORY/
SET
Jog dial
(Main unit operation)
0:00 AM 12:00
2
3
4
5
6
7
8
XL-530E(SUK) TINSE0017SJZZ
6
COMPACT DISC OPERATION
■
Care of compact discs
Compact discs are fairly resistant to damage,
however mistracking can occur due to an accu-
mulation of dirt on the disc surface.
Follow the guidelines below for maximum enjoy-
ment from your CD collection and player.
however mistracking can occur due to an accu-
mulation of dirt on the disc surface.
Follow the guidelines below for maximum enjoy-
ment from your CD collection and player.
●
Do not write on either side of the disc, partic-
ularly the non-label side. Signals are read from
the non-label side. Do not mark this surface.
ularly the non-label side. Signals are read from
the non-label side. Do not mark this surface.
●
Keep your discs away from direct sunlight,
heat, and excessive moisture.
heat, and excessive moisture.
●
Always hold the CDs by the edges. Finger-
prints, dirt, or water on the CDs can cause
noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth,
wiping straight out from the centre, along the
radius.
prints, dirt, or water on the CDs can cause
noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth,
wiping straight out from the centre, along the
radius.
■
CD playback
1
Press the ON/STAND-BY button to turn the
power on.
power on.
2
Press the FUNCTION button until "Cd" ap-
pears in the display.
pears in the display.
●
Press the CD button on the remote control.
3
Press the
7
CD EJECT button to open the
CD compartment.
4
Place a compact disc on the spindle, label
side up.
side up.
5
Close the CD compartment by firmly pushing
the corner marked "PUSH CLOSE".
the corner marked "PUSH CLOSE".
●
The total number of tracks and the total playing
time will be displayed.
time will be displayed.
6
Press the
0
/ CD
6
(
0 6
) button to start
playback from track 1.
●
When the last track on the disc has finished
playing, the unit will stop automatically.
playing, the unit will stop automatically.
To interrupt playback:
1
Press the
0
/ CD
6
(
0 6
) button.
2
Press the
0
/ CD
6
(
0 6
) button again to
resume playback from the same point.
To stop playback:
Press the
■
button.
After use:
Press the ON/STAND-BY button to enter the
stand-by mode.
stand-by mode.
NO
YES
Correct
Correct
3
4
5
1
2
6
2
1
6
XL-530E(SUK) TINSE0017SJZZ
7
Click on the first or last page to see other XL-530H service manuals if exist.