Sharp XL-530H User Manual / Operation Manual ▷ View online
HEADPHONES
●
Before plugging in or unplugging the head-
phones, make sure the volume level is re-
duced.
phones, make sure the volume level is re-
duced.
●
Be sure your headphones have a 3.5 mm
(1/8") diameter plug and are between 16 ohms
and 50 ohms impedance. The recommended
impedance is 32 ohms.
(1/8") diameter plug and are between 16 ohms
and 50 ohms impedance. The recommended
impedance is 32 ohms.
●
When headphones are connected, the speak-
ers are disconnected automatically. Adjust the
VOLUME control for desired volume.
ers are disconnected automatically. Adjust the
VOLUME control for desired volume.
MAINTENANCE
■
Internal care
●
Do not touch the Laser pickup lens. If finger-
prints or dust accumulate on the pickup, clean
it gently with a dry cotton swab.
prints or dust accumulate on the pickup, clean
it gently with a dry cotton swab.
●
Dirty heads, capstan or pinch roller can cause
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
●
After long use, the deck’s heads and capstan
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording time by using a commer-
cia l tap e head demagnetiser. Read the
demagnet-iser’s instructions carefully before
use.
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording time by using a commer-
cia l tap e head demagnetiser. Read the
demagnet-iser’s instructions carefully before
use.
■
External care
●
Periodically wipe the cabinet with a soft cloth
and a diluted soap solution, then wipe with a
dry cloth.
and a diluted soap solution, then wipe with a
dry cloth.
●
Do not use chemically treated cleaning cloths
or other chemicals.
or other chemicals.
RESETTING THE MICRO-
COMPUTER
COMPUTER
Reset the microcomputer under the following
conditions:
conditions:
●
To erase all of the stored memory contents (clock
and timer settings, and tuner and CD presets).
and timer settings, and tuner and CD presets).
●
If the display is not correct.
●
If the operation is not correct.
1
Press the ON/STAND-BY button to enter the
stand-by mode.
stand-by mode.
2
Unplug the AC power lead from the AC INPUT
socket on this unit.
socket on this unit.
3
Whilst pressing down the MEMORY/SET button
and the BASS/TREBLE button, plug the AC
power lead into the AC INPUT socket on this unit.
and the BASS/TREBLE button, plug the AC
power lead into the AC INPUT socket on this unit.
Caution:
●
The operation explained above will erase all data
stored in memory, such as clock and timer set-
tings, and tuner and CD presets.
stored in memory, such as clock and timer set-
tings, and tuner and CD presets.
1
3
3
2,3
XL-530E(SUK) TINSE0017SJZZ
16
SPECIFICATIONS
As a part of our policy of continuous improve-
ment, SHARP reserves the right to make de-
sign and specification changes for product
improvement without prior notice. The perfor-
mance specification figures indicated are nom-
inal values of production units. There may be
some deviations from these values in individual
units.
ment, SHARP reserves the right to make de-
sign and specification changes for product
improvement without prior notice. The perfor-
mance specification figures indicated are nom-
inal values of production units. There may be
some deviations from these values in individual
units.
■
Main unit
●
General
Power source:
AC 230 V, 50 Hz
Power
consumption:
consumption:
Stand-by; 0.6 W
Power on; 24 W
Power on; 24 W
Dimensions:
Width; 160 mm (6-5/16")
Height; 241 mm (9-1/2")
Depth; 249 mm (9-13/16")
Height; 241 mm (9-1/2")
Depth; 249 mm (9-13/16")
Weight:
2.6 kg (5.7 lbs.)
●
Amplifier section
Output power:
RMS; 10 W (5 W + 5 W)
(10 % T.H.D.)
(10 % T.H.D.)
Output terminals:
Speakers; 4 ohms
Headphones; 16-50 ohms
(recommended; 32 ohms)
Headphones; 16-50 ohms
(recommended; 32 ohms)
●
Tuner section
Frequency range:
FM; 87.5-108 MHz
AM; 522-1,620 kHz
AM; 522-1,620 kHz
●
Compact disc player section
Type:
Compact disc player
Signal readout:
Non-contact, 3-beam semi-
conductor laser pickup
conductor laser pickup
D/A converter:
1-bit D/A converter
Filter:
8-times oversampling digital
filter
filter
Frequency
response:
response:
20 - 20,000 Hz
Wow and flutter:
Unmeasurable
(less than 0.001% W. peak)
(less than 0.001% W. peak)
●
Cassette deck section
Frequency
response:
response:
50 - 14,000 Hz (Normal
tape)
tape)
Signal/noise ratio:
50 dB
Wow and flutter:
0.25 % (WRMS)
■
Speaker
Type:
Full range speaker system
Speakers:
10 cm (4") full-range
speaker
speaker
Rated input power:
5 W
Maximum input
power:
power:
10 W
Impedance:
4 ohms
Dimensions:
Width; 145 mm (5-3/4")
Height; 240 mm (9-1/2")
Depth; 191 mm (7-1/2")
Height; 240 mm (9-1/2")
Depth; 191 mm (7-1/2")
Weight:
1.4 kg (3.1 lbs.)/each
XL-530E(SUK) TINSE0017SJZZ
17
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. ("Sharp") guarantees to provide for the repair, or at its option the
replacement, of this product subject to the conditions listed below:-
replacement, of this product subject to the conditions listed below:-
1. This guarantee shall only apply to faults which are due to inferior workmanship or materials.
It does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect,
tampering with the product, or repair other than by a Service Facility appointed by Sharp.
tampering with the product, or repair other than by a Service Facility appointed by Sharp.
2. As this product is intended for private domestic use only, the guarantee will not apply if the
product is used in the course of a business, trade or profession.
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its
appointed Service Facility within one year from the date this product was purchased. Proof
of purchase must be provided.
of purchase must be provided.
4. The guarantee does not cover carriage costs, jewelled styli, audio tapes, compact discs or
batteries.
5. In the unlikely event of this product requiring repair, please contact the supplier from whom
it was purchased. Where this is not possible, please contact the Sharp Customer Information
Centre on the telephone number given below.
Centre on the telephone number given below.
6. No person has any authority to vary the terms or conditions of this guarantee.
7. This guarantee is offered as an additional benefit to your statutory rights, and does not affect
these rights in any way.
If you have any difficulty operating this product, or would like information or other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.
please telephone the Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 0345 125387
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
TINSE0017SJZZ
A9902.SM
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. ("Sharp") guarantees to provide for the repair, or at its option the
replacement, of this product subject to the conditions listed below:-
replacement, of this product subject to the conditions listed below:-
1. This guarantee shall only apply to faults which are due to inferior workmanship or materials.
It does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect,
tampering with the product, or repair other than by a Service Facility appointed by Sharp.
tampering with the product, or repair other than by a Service Facility appointed by Sharp.
2. As this product is intended for private domestic use only, the guarantee will not apply if the
product is used in the course of a business, trade or profession.
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its
appointed Service Facility within one year from the date this product was purchased. Proof
of purchase must be provided.
of purchase must be provided.
4. The guarantee does not cover carriage costs, jewelled styli, audio tapes, compact discs or
batteries.
5. In the unlikely event of this product requiring repair, please contact the supplier from whom
it was purchased. Where this is not possible, please contact the Sharp Customer Information
Centre on the telephone number given below.
Centre on the telephone number given below.
6. No person has any authority to vary the terms or conditions of this guarantee.
7. This guarantee is offered as an additional benefit to your statutory rights, and does not affect
these rights in any way.
If you have any difficulty operating this product, or would like information or other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.
please telephone the Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 0345 125387
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
TINSE0017SJZZ
A9902.SM
