Sharp XL-1000 User Manual / Operation Manual ▷ View online
9
XL-1000H(E)1.fm
01/1/17
Ge
ne
ral Inf
o
rma
tion
- Cont
ro
ls a
n
d
Indicator
s -
„
Speaker system
1. Tweeter
2. Woofer
3. Bass Reflex Duct
4. Speaker Terminals
2. Woofer
3. Bass Reflex Duct
4. Speaker Terminals
Speaker grilles are removable:
Make sure nothing comes into contact with the speaker diaphragms when you
remove the speaker grilles.
remove the speaker grilles.
Placing the speaker system:
There is no distinction between the right and the left speakers.
4
3
2
1
Left speaker
Right speaker
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
10
XL-1000H(E)1.fm
01/1/17
Pre
p
ar
at
ion
f
o
r U
s
e
-
S
y
s
te
m
Connections
-
System Connections
Right speaker
Left speaker
FM aerial
AM loop aerial
VCR, DVD, etc.
Wall socket
(AC 230 V, 50 Hz)
MD recorder
not supplied
not supplied
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
11
XL-1000H(E)2.fm
01/1/17
Pre
p
ar
at
ion
f
o
r U
s
e
-
S
y
s
te
m
Connections
-
„
Aerial connection
Notes:
z
Placing the aerial on the unit or near the AC power lead may cause noise pickup.
Place the aerial away from the unit for better reception.
Place the aerial away from the unit for better reception.
z
When static is still heard even after adjusting the position of the AM loop aerial, try
reversing the wire connections.
reversing the wire connections.
Installing the AM loop aerial:
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception. Consult your dealer.
Notes:
z
When an external FM aerial is used, disconnect the supplied FM aerial wire from
the FM 75 OHMS socket.
the FM 75 OHMS socket.
z
When using an external AM aerial, be sure to keep the wire of the AM loop aerial
connected.
connected.
„
Speaker connection
Connect the wire with the white line to the minus (-) terminal and the black wire to the
plus (+) terminal.
plus (+) terminal.
Caution:
z
Connect the speaker wires to the speakers first, then to the unit.
z
Use speakers with an impedance of 8 ohms or more, as lower impedance speak-
ers can damage the unit.
ers can damage the unit.
z
Do not mistake the right and the left channels. The right speaker is the one on the
right side when you face the unit.
right side when you face the unit.
z
Do not let the bare speaker wires touch each other.
„
Connecting the AC power lead
After checking all the connections have been made correctly, connect the AC power
lead to the AC power input socket, then plug the AC power lead of this unit into the
wall socket.
lead to the AC power input socket, then plug the AC power lead of this unit into the
wall socket.
Notes:
z
Unplug the unit if it will not be used for a prolonged period of time.
z
Never use a power lead other than the one supplied. Otherwise, a malfunction or
an accident may occur.
an accident may occur.
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the di-
rection where the strongest signal can be re-
ceived.
socket and position the FM aerial wire in the di-
rection where the strongest signal can be re-
ceived.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM and
GND terminals. Position the AM loop aerial for
optimum reception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
GND terminals. Position the AM loop aerial for
optimum reception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
< Assembling >
< Attaching to the wall >
Wall
Screws
(not
supplied)
External
FM aerial
FM aerial
External AM aerial
15 m (49 feet)
7.5 m (25 feet)
AM loop aerial
Earth rod
Right speaker
Left speaker
Incorrect
Incorrect
Black
White line
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
12
XL-1000H(E)2.fm
01/1/17
Pre
p
ar
at
ion
f
o
r U
s
e
- Re
mo
te
Cont
ro
l -
Remote Control
„
Battery installation
Precautions for battery use:
z
Replace all old batteries with new ones at the same time.
z
Do not mix old and new batteries.
z
Remove the batteries if the unit will not be used for long periods of time. This will
prevent potential damage due to battery leakage.
prevent potential damage due to battery leakage.
Caution:
z
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
z
Installing the batteries incorrectly may cause the unit to malfunction.
Notes concerning use:
z
Replace the batteries if the operating distance is reduced or if the operation
becomes erratic.
becomes erratic.
z
Periodically clean the transmitter on the remote control and the sensor on the unit
with a soft cloth.
with a soft cloth.
z
Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.
Change the lighting or the direction of the unit.
z
Keep the remote control away from moisture, heat, shock, and vibrations.
„
Test of the remote control
Face the remote control directly to the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy the
music.
music.
Use 2 "AAA" size batteries (UM-4, R03, HP-16 or similar).
Batteries are not included.
Batteries are not included.
1 Remove the battery cover.
2 Insert the batteries according to the direction indicated in the bat-
2 Insert the batteries according to the direction indicated in the bat-
tery compartment.
When inserting or removing the batteries, push them towards the battery termi-
nals.
nals.
3 Replace the cover.
0.2 m - 6 m
(8" - 20')
(8" - 20')
Remote sensor
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other XL-1000 service manuals if exist.