Sharp XL-1000 User Manual / Operation Manual ▷ View online
17
XL-1000H(E)2.fm
01/1/17
C
D
P
lay
b
a
ck
- List
ening t
o
a
CD -
To remove the CD:
Whilst in the stop mode, press the (OPEN/CLOSE) button.
Press the CD eject button and remove the CD.
Press the CD eject button and remove the CD.
Notes:
z
After removing the CD, make sure to press the (OPEN/CLOSE) button and
close the CD compartment.
close the CD compartment.
z
When the unit enters the stand-by mode, the opened CD compartment cover will
be closed automatically.
be closed automatically.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Caution:
z
Do not stop or move the CD compartment cover manually. It may cause mal-
functions to the unit.
functions to the unit.
z
Be careful not to jam your fingers in the CD compartment cover.
z
If the power fails whilst the compartment is open, wait until the power is restored.
z
If a disc is damaged, dirty, or loaded upside down, "NO DISC" or "READ ERR" will
appear on the display.
appear on the display.
z
Keep foreign objects out of the CD compartment.
z
Subjecting the unit to shock or vibration may cause mistracking.
z
When the unit is not being used, be sure to close the CD compartment. If it is left
open, the lens may be covered with dust and the unit may not operate properly.
open, the lens may be covered with dust and the unit may not operate properly.
z
If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
the TV or radio.
„
To locate the beginning of a track
„
To locate the desired portion
Notes:
z
Normal playback will resume when the
or
button is released.
z
When the end of the last track is reached during fast forward, "END" will appear on
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, playback will start when you release the
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, playback will start when you release the
button.
z
The
or
button on the remote control allows you to locate the desired por-
tion.
CD Eject Button
To move to the beginning of the next track:
Press the
button for less than 0.5 seconds during playback.
z
You can skip to any track by pressing the
button re-
peatedly until the desired track number appears.
To restart the track being played:
Press the
button for less than 0.5 seconds during playback.
z
You can skip to any track by pressing the
button re-
peatedly until the desired track number appears.
For audible fast forward:
Press and hold down the
button during playback.
For audible fast reverse:
Press and hold down the
button during playback.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
18
XL-1000H(E)2.fm
01/1/17
C
D
P
lay
b
a
ck
- Repe
at or
Ra
nd
om
P
la
y
-
Repeat or Random Play
You can select one of the CD playback mode; "Repeat play", "Random play" and
"Normal play".
"Normal play".
To repeat a programmed sequence:
Perform steps 1 - 5 in the "Programmed Play" section and then select the repeat play-
back.
back.
Notes:
z
In random play, the CD player will select and play tracks automatically. (You cannot
select the order of the tracks.)
select the order of the tracks.)
z
If you press the
button during random play, you can move to the track selected
next by the random operation. On the other hand, the
button does not allow
you to move to the previous track. The beginning of the track being played will be
located.
located.
Caution:
After performing repeat or random play, be sure to press the button. Otherwise, the
disc will play continuously.
disc will play continuously.
To cancel repeat or random play:
Press the RANDOM/REPEAT button on the remote control repeatedly to select the
normal playback mode.
normal playback mode.
1
When in the CD mode, press the RANDOM/REPEAT button on the
remote control repeatedly to select the playback mode.
remote control repeatedly to select the playback mode.
Repeat playback mode
Random playback mode
Normal playback mode
2
Press the button to start playback.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
19
XL-1000H(E)2.fm
01/1/17
C
D
P
lay
b
a
ck
- Pr
ogr
a
mmed Pla
y
-
Programmed Play
By specifying tracks from 1 to 99, you can choose up to 20 selections for playback in
the order you like.
the order you like.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be dis-
played. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the
last track of the original programme.
played. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the
last track of the original programme.
Notes:
z
Opening the CD compartment automatically cancels the programmed sequence.
z
Even if you press the ON/STAND-BY button to enter the stand-by mode or the
function is changed from CD to some other function, the programmed selections
will not be cleared.
function is changed from CD to some other function, the programmed selections
will not be cleared.
z
During programme operation, random play is not possible.
1
Whilst in the stop mode, press the MEMORY/SET (MEMORY) but-
ton to enter the programming save mode.
ton to enter the programming save mode.
2
Within 30 seconds, press the
or
button to select the desired
track.
Selected track number
Playback time
3
Press the MEMORY/SET (MEMORY) button to save the track
number.
number.
Playback order
Total playback time
4
Repeat steps 2 - 3 for other tracks. Up to 20 tracks can be pro-
grammed.
grammed.
5
Press the
( ) button to start playback.
To clear the programmed selections:
Press the CLEAR button on the remote control
whilst the "MEMORY" indicator is flashing.
Each time the button is pressed, one track will be
cleared, beginning with the last track pro-
grammed.
whilst the "MEMORY" indicator is flashing.
Each time the button is pressed, one track will be
cleared, beginning with the last track pro-
grammed.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indi-
cator is lit, press the CLEAR button on the remote
control. The "MEMORY" indicator will disappear
and all the programmed contents will be cleared.
cator is lit, press the CLEAR button on the remote
control. The "MEMORY" indicator will disappear
and all the programmed contents will be cleared.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
20
XL-1000H(E)2.fm
01/1/17
Radio
- Liste
n
in
g
to
the R
a
dio -
Listening to the Radio
To receive an FM stereo transmission:
Press the FUNCTION (BAND) button to display the "ST" indicator.
z
"
" will appear when an FM broadcast is in stereo.
z
If the FM reception is weak, press the FUNCTION (BAND) button to extinguish the
"ST" indicator. The reception changes to monaural, and the sound becomes
clearer.
"ST" indicator. The reception changes to monaural, and the sound becomes
clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "FM" or "AM" appears on the dis-
play.
play.
When operating with the remote control, press the TUNER button, and then the
BAND button to select "FM" or "AM".
BAND button to select "FM" or "AM".
3
Press the TUNING ( or ) button to tune in to the desired station.
Manual tuning:
Press the TUNING button as many times as required to tune in to the desired
station.
station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 seconds, scanning will
start automatically and the tuner will stop at the first receivable broadcast station.
start automatically and the tuner will stop at the first receivable broadcast station.
Notes:
z
This can be operated by pressing the TUN. ( or ) button on the remote
control.
control.
z
When radio interference occurs, auto scan tuning may stop automatically at
that point.
that point.
z
Auto scan tuning will skip weak signal stations.
z
To stop the auto tuning, press the TUNING button again.
FM stereo mode indicator
FM stereo receiving indicator
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other XL-1000 service manuals if exist.