Sharp XL-1000 (serv.man3) User Manual / Operation Manual ▷ View online
ENGLISH
01/1/13
XL-1000H(H)E1.fm
E-8
Pr
ep
ar
ati
o
n
f
o
r U
s
e
-
Remote Con
tr
o
l
-
Remote Control
„
Battery installation
Precautions for battery use:
z
Replace all old batteries with new ones at the same time.
z
Do not mix old and new batteries.
z
Remove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leak-
age.
of time. This will prevent potential damage due to battery leak-
age.
Caution:
z
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
z
Installing the batteries incorrectly may cause the unit to malfunc-
tion.
tion.
Notes concerning use:
z
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 "AAA" size batteries (UM-
4, R03, HP-16 or similar).
operation becomes erratic. Purchase 2 "AAA" size batteries (UM-
4, R03, HP-16 or similar).
z
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
sensor on the unit with a soft cloth.
z
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
operation. Change the lighting or the direction of the unit.
z
Keep the remote control away from moisture, heat, shock, and
vibrations.
vibrations.
„
Test of the remote control
Face the remote control directly to the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy the music.
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy the music.
1
Remove the battery cover.
2
Insert the batteries according to the direction indicated in
the battery compartment.
the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
3
Replace the cover.
0.2 m - 6 m
(8" - 20')
(8" - 20')
Remote sensor
01/1/13
XL-1000H(H)E1.fm
ENGLISH
E-9
Bas
ic Ope
ratio
n
-
G
e
ner
a
l Contr
o
l -
General Control
„
To turn the power on
Press the ON/STAND-BY button to turn the power on.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
Press the ON/STAND-BY button again.
„
To change the display brightness (2 levels)
You can switch the display brightness by pressing the DIMMER but-
ton on the remote control.
ton on the remote control.
„
Opening and closing the CD compartment
The CD compartment cover is motorised.
When the power is turned on, you can open or close the CD com-
partment cover by pressing the (OPEN/CLOSE) button.
partment cover by pressing the (OPEN/CLOSE) button.
Caution:
z
Do not stop or move the CD compartment cover manually. It may
cause malfunctions to the unit.
cause malfunctions to the unit.
z
Be careful not to jam your fingers in the CD compartment cover.
Dimmed
Brightened
ENGLISH
01/1/13
XL-1000H(H)E1.fm
E-10
Bas
ic Ope
ratio
n
- Sou
nd Contr
o
l
-
Sound Control
„
Adjusting the volume
Press the VOLUME button to increase the volume and the VOL-
UME button for decreasing.
UME button for decreasing.
„
Adjusting the bass
Main unit operation:
1
1
Press the BASS/TREBLE button until "BASS" appears on the
display.
display.
2
Within 5 seconds, press the VOLUME ( or ) button to adjust
the bass.
the bass.
Remote control operation:
Press the BASS ( or ) button to adjust the bass.
Press the BASS ( or ) button to adjust the bass.
„
Adjusting the treble
Main unit operation:
1
1
Press the BASS/TREBLE button until "TRE" appears on the dis-
play.
play.
2
Within 5 seconds, press the VOLUME ( or ) button to adjust
the treble.
the treble.
Remote control operation:
Press the TREBLE ( or ) button to adjust the treble.
Press the TREBLE ( or ) button to adjust the treble.
2
1
28
29 MAX
MIN
.....
0
5
-5
...
...
0
5
-5
...
...
01/1/13
XL-1000H(H)E2.fm
ENGLISH
E-11
Bas
ic Ope
ratio
n
-
Se
tt
in
g t
h
e
Cloc
k
-
Setting the Clock
This may be operated only with the remote control.
In this example, the clock is set for the 24-hour (0:00) display.
To confirm the time display when the power is on:
Press the CLOCK button.
The time display will appear for about 5 seconds.
Press the CLOCK button.
The time display will appear for about 5 seconds.
Note:
The time will flash at the push of the CLOCK button when the AC
power supply is restored after a power failure or unplugging the unit.
Readjust the clock as follows.
The time will flash at the push of the CLOCK button when the AC
power supply is restored after a power failure or unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the Clock" from the beginning.
Perform "Setting the Clock" from the beginning.
To change the 24-hour or 12-hour display:
1
Press the CLOCK button and within 3 seconds, press
the MEMORY button.
the MEMORY button.
2
Within 1 minute, press the PRESET ( or ) button to
select 24-hour or 12-hour display and then press the
MEMORY button.
select 24-hour or 12-hour display and then press the
MEMORY button.
"0:00"
The 24-hour display will appear.
(0:00
-
23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it
has been reset. (Refer to step 3 under "If trouble occurs" on
page 23.)
has been reset. (Refer to step 3 under "If trouble occurs" on
page 23.)
3
Within 1 minute, press the PRESET ( or ) button to
adjust the hour and then press the MEMORY button.
adjust the hour and then press the MEMORY button.
z
When the 12-hour display is selected, "AM" will change auto-
matically to "PM".
matically to "PM".
4
Within 1 minute, press the PRESET ( or ) button to
adjust the minutes and then press the MEMORY button.
adjust the minutes and then press the MEMORY button.
z
The hour will not advance even if minutes advance from "59"
to "00".
to "00".
z
The clock starts from "0" second. (Seconds are not dis-
played.)
played.)
1
Clear all the programmed contents. [Perform to step 3 under "If
trouble occurs" on page 23 for details.]
trouble occurs" on page 23 for details.]
2
Perform "Setting the Clock" from the beginning.
Click on the first or last page to see other XL-1000 (serv.man3) service manuals if exist.