Sharp XL-1000 (serv.man3) User Manual / Operation Manual ▷ View online
ENGLISH
01/1/13
XL-1000H(H)E2.fm
E-20
Ad
v
a
n
c
e
d
Fe
at
ur
es
- Time
r a
n
d Sle
e
p Oper
a
tion -
Timer and Sleep Operation (continued)
To reset or change the timer setting:
Perform "Timer playback" from the beginning.
Notes:
z
Once the time is set, the setting will be retained until a new time
is entered.
is entered.
z
When performing timer playback using another unit connected to
the VIDEO/AUX IN sockets, select "VIDEO/AUX" in step 2. At this
time, only this unit will be turned on or enter the power stand-by
mode automatically. It will enter the power stand-by mode 1 hour
after the timer playback starts. (Another unit will not be turned on
or off.)
the VIDEO/AUX IN sockets, select "VIDEO/AUX" in step 2. At this
time, only this unit will be turned on or enter the power stand-by
mode automatically. It will enter the power stand-by mode 1 hour
after the timer playback starts. (Another unit will not be turned on
or off.)
6
Within 1 minute, press the PRESET ( or ) button to
specify the minutes to start, then press the MEMORY
button.
specify the minutes to start, then press the MEMORY
button.
z
The timer playback starting time, function, and volume will be
displayed, and then the unit will enter the stand-by mode
automatically.
displayed, and then the unit will enter the stand-by mode
automatically.
z
" " will appear and the current time will be displayed.
To cancel the timer playback:
Press the ON/STAND-BY button to turn the power on.
7
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the volume
you were listening at before your system enters the timer stand-
by mode.
you were listening at before your system enters the timer stand-
by mode.
8
If you select CD, the unit will enter the stand-by mode
after the playback. If you select TUNER, it will enter the
stand-by mode one hour after the timer playback starts.
after the playback. If you select TUNER, it will enter the
stand-by mode one hour after the timer playback starts.
01/02/19
XL-1000H(H)E3.fm
ENGLISH
E-21
Ad
v
a
n
c
e
d
Fe
at
ur
es
- Time
r a
n
d Sle
e
p Oper
a
tion -
„
Sleep operation
To cancel the sleep operation:
Press the ON/STAND-BY button whilst the sleep timer is set.
To confirm the remaining sleep time:
Press the SLEEP button once whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
Press the SLEEP button once whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
„
To use timer and sleep operation together
Example: To fall asleep and wake to the same radio station
You can play back the same source only (the function cannot be
switched).
You can play back the same source only (the function cannot be
switched).
1
Play back the desired sound source.
2
Press the SLEEP button.
To change the sleep time:
Press the SLEEP button repeatedly to select the desired sleep
time. The time will decrease as follows.
time. The time will decrease as follows.
The amount of sleep time can also be changed whilst in the
sleep mode.
sleep mode.
3
Your system will enter the power stand-by mode auto-
matically after the preset time has elapsed.
matically after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep op-
eration finishes.
eration finishes.
3:00
2:00
OFF
15
30
1:30
1:00
1
Set the sleep time (see left, steps 1 - 2).
2
Whilst the sleep timer is set, set the desired playback
time (steps 4 - 6, pages 19 - 20).
time (steps 4 - 6, pages 19 - 20).
1.Sleep timer setting
2.Timer playback setting
2.Timer playback setting
Timer playback
start time
start time
15 minutes - 3 hours
Desired time
Sleep operation will
automatically stop.
automatically stop.
End time
ENGLISH
01/02/19
XL-1000H(H)E3.fm
E-22
Ad
v
a
n
c
e
d
Fe
at
ur
es
- Enhancing Y
our
System
-
Enhancing Your System
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
able lead as shown below.
„
Listening to the playback sounds from
VCR, DVD, etc.
VCR, DVD, etc.
Note:
To prevent hum interference, place this unit away from a television.
To prevent hum interference, place this unit away from a television.
„
To record CD signals on MDs
The digital signal from this unit can be recorded by MiniDisc record-
ers, etc.
ers, etc.
Note:
Only CD signals can be output.
Only CD signals can be output.
„
Headphones
z
Before plugging in or unplugging the headphones, reduce the vol-
ume.
ume.
z
Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.
z
Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME buttons.
cally. Adjust the volume using the VOLUME buttons.
VCR, DVD, etc.
MD recorder
Connection cable
for digital recording
for digital recording
White
White
RCA lead
Red
Red
To the line
output socket
output socket
To the optical line
input socket
input socket
Headphones
1
Use a connection lead to connect the VCR, DVD, etc. to the VID-
EO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
EO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the FUNCTION button until "AUX" appears on the display.
When operating with the remote control, press the VIDEO/AUX
button.
When operating with the remote control, press the VIDEO/AUX
button.
4
Play the VCR, DVD, etc.
1
Remove the DIGITAL OUT socket cover.
2
Use a connection cable for digital recording to connect the unit to
the OPTICAL IN socket of a MiniDisc recorder, etc.
the OPTICAL IN socket of a MiniDisc recorder, etc.
3
Press the ON/STAND-BY button to turn the power on.
4
Put the MiniDisc recorder, etc. in the recording mode.
5
Play a CD on this unit.
01/02/19
XL-1000H(H)E3.fm
ENGLISH
E-23
Referen
c
e
s
- T
ro
u
b
le
s
hoot
in
g
/ Ma
int
e
nance -
Troubleshooting
„
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
Maintenance
„
Cleaning the CD pickup lens
Do not touch the laser pickup lens. If fingerprints or dust accumulate
on the pickup, clean it gently with a dry cotton swab.
on the pickup, clean it gently with a dry cotton swab.
„
Cleaning the cabinet
1
Set the unit to the stand-by mode and turn the power on
again.
again.
2
If the unit is not restored in step 1, unplug and plug in the
unit, and then turn the power on.
unit, and then turn the power on.
3
If neither step 1 nor 2 restores the unit, do the following:
Press the ON/STAND-BY button to enter the power stand-by
mode.
Unplug the AC power lead from the AC INPUT socket on the
unit.
Whilst pressing down the MEMORY/SET button and the
mode.
Unplug the AC power lead from the AC INPUT socket on the
unit.
Whilst pressing down the MEMORY/SET button and the
button, plug the AC power lead into the AC INPUT socket on
the unit.
the unit.
AC INPUT
Periodically wipe the cabinet with a soft cloth
and a diluted soap solution, then with a dry
cloth.
Caution:
and a diluted soap solution, then with a dry
cloth.
Caution:
z
Do not use chemicals for cleaning (petrol,
paint thinner, etc.). It may damage the
cabinet finish.
paint thinner, etc.). It may damage the
cabinet finish.
z
Do not apply oil to the inside of the unit. It
may cause malfunctions.
may cause malfunctions.
Click on the first or last page to see other XL-1000 (serv.man3) service manuals if exist.