Sharp XL-1000 (serv.man3) User Manual / Operation Manual ▷ View online
ENGLISH
01/1/13
XL-1000H(H)E2.fm
E-16
Ra
d
io
- Listening to the Ra
dio -
Listening to the Radio
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "FM" or "AM" ap-
pears on the display.
pears on the display.
When operating with the remote control, press the TUNER but-
ton, and then the BAND button to select "FM" or "AM".
ton, and then the BAND button to select "FM" or "AM".
3
Press the TUNING ( or ) button to tune in to the de-
sired station.
sired station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
z
This can be operated by pressing the TUN. ( or ) button
on the remote control.
on the remote control.
z
When radio interference occurs, auto scan tuning may stop
automatically at that point.
automatically at that point.
z
Auto scan tuning will skip weak signal stations.
z
To stop the auto tuning, press the TUNING button again.
Sound Control (See page 10.)
01/1/13
XL-1000H(H)E2.fm
ENGLISH
E-17
Ra
d
io
- Listening to the Ra
dio -
To receive an FM stereo transmission:
Press the FUNCTION (BAND) button to display the "ST" indicator.
Press the FUNCTION (BAND) button to display the "ST" indicator.
z
"
" will appear when an FM broadcast is in stereo.
z
If the FM reception is weak, press the FUNCTION (BAND) button
to extinguish the "ST" indicator. The reception changes to mon-
aural, and the sound becomes clearer.
to extinguish the "ST" indicator. The reception changes to mon-
aural, and the sound becomes clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Press the ON/STAND-BY button to enter the power stand-by mode.
FM stereo mode indicator
FM stereo receiving indicator
ENGLISH
01/1/13
XL-1000H(H)E2.fm
E-18
Ra
d
io
- Lis
te
n
ing t
o
t
h
e
memor
is
ed sta
tion -
Listening to the memorised station
„
Memorising a station
You can store 30 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
the push of a button. (Preset tuning)
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead discon-
nection.
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead discon-
nection.
„
To recall a memorised station
„
To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
set memory scan)
„
To clear a memorised station
1
Perform the steps 1 - 3 in "Listening to the Radio" on
page 16.
page 16.
2
Press the MEMORY/SET (MEMO-
RY) button to enter the preset tun-
ing saving mode.
RY) button to enter the preset tun-
ing saving mode.
3
Within 5 seconds, press the PRE-
SET ( or ) button to select the
preset channel number.
SET ( or ) button to select the
preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 5 seconds, press the MEMO-
RY/SET (MEMORY) button to store
that station in memory.
RY/SET (MEMORY) button to store
that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
preset station.
When a new station is stored in memory, the station previously
memorised will be erased.
memorised will be erased.
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
select the desired station.
Preset channel
Frequency and frequency band
1
Press the PRESET ( or ) button for more than 0.5
seconds.
seconds.
The preset number will flash and the programmed stations will
be tuned in sequentially, for 5 seconds each.
be tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the de-
sired station is located.
sired station is located.
1
Recall the memorised station.
2
Whilst it is displayed, press the
MEMORY/SET (MEMORY) but-
ton.
MEMORY/SET (MEMORY) but-
ton.
3
Within 5 seconds, press the
CLEAR button on the remote con-
trol.
CLEAR button on the remote con-
trol.
Listening to the Radio (See page 16.)
01/1/13
XL-1000H(H)E2.fm
ENGLISH
E-19
Ad
v
a
n
c
e
d
Fe
at
ur
es
- Time
r a
n
d Sle
e
p Oper
a
tion -
Timer and Sleep Operation
This may be operated only with the remote control.
Timer playback:
The unit turns on and plays the desired source (CD, tuner) at the
preset time.
The unit turns on and plays the desired source (CD, tuner) at the
preset time.
Sleep operation:
The radio and compact disc can all be turned off automatically.
The radio and compact disc can all be turned off automatically.
„
Timer playback
Before setting timer:
Continued to the next page
1
Press the CLOCK button to check that the clock is on time.
2
Load a disc to be played.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD or TUNER button to select the desired
function.
function.
When you selected the TUNER, tune in to the desired sta-
tion.
tion.
3
Adjust the volume using the VOLUME buttons.
Do not turn the volume up too high.
4
Press the TIMER button and within 6 seconds, press
the MEMORY button.
the MEMORY button.
5
Within 1 minute, press the PRESET ( or ) button to
specify the hour to start, then press the MEMORY but-
ton.
specify the hour to start, then press the MEMORY but-
ton.
Setting the Clock (See page 11.) / Listening to the Radio (See page 16.)
Click on the first or last page to see other XL-1000 (serv.man3) service manuals if exist.