Sharp WA-MP55HS User Manual / Operation Manual ▷ View online
46
05/5/23
WA-MP50_55H_UK.fm
WA-MP50_55H TINSEA063SJZZ
D
F
S
V
I
N
P
E
1
2
3
4
5
6
7
8
WA-MP50H
WA-MP55H
WA-MP55H
Ref
e
rences
-E
rr
o
r me
ssag
e
s
/M
ain
ten
an
ce
-
Error messages
Maintenance
!
Cleaning
When the unit becomes dirty
Clean it with a soft cloth. When the unit is excessively
dirty, use a soft cloth dampened in water (external sur-
faces only).
Clean it with a soft cloth. When the unit is excessively
dirty, use a soft cloth dampened in water (external sur-
faces only).
Clean the plugs and the connecting sockets.
If the plugs or sockets are dirty, noise may be heard.
Cleaning will prevent noise.
If the plugs or sockets are dirty, noise may be heard.
Cleaning will prevent noise.
Caution:
"
Do not use chemicals for cleaning (petrol, paint thin-
ner, etc.). It may damage the cabinet finish.
ner, etc.). It may damage the cabinet finish.
"
Do not apply oil to the inside of the unit. It may cause
malfunctions.
malfunctions.
ERROR MESSAGES
MEANING
Low Battery! Can
Not Record
Not Record
Recording is impossible due to
low battery.
(Replace the battery.)
low battery.
(Replace the battery.)
Disk Is Full! Can Not
Record
Record
Memory is full and recording is
impossible.
(Delete some data to make
room.)
impossible.
(Delete some data to make
room.)
Low Battery! Shut
Down...
Down...
The battery has run out.
(Replace the battery.)
(Replace the battery.)
> HOLD <
The HOLD switch is turned on.
(Turn off the HOLD switch.)
(Turn off the HOLD switch.)
47
05/5/27
WA-MP50_55H_UK.fm
WA-MP50_55H TINSEA063SJZZ
WA-MP50H
WA-MP55H
WA-MP55H
Ref
e
rences
-S
pe
c
ific
a
tions
-
Specifications
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
Power source:
DC 1.5 V: "AAA" size alkaline bat-
tery (LR03 or similar) x 1
DC 5 V: USB bus power
tery (LR03 or similar) x 1
DC 5 V: USB bus power
Dimensions:
Width: 54 mm (2-2/16")
Height: 56 mm (2-2/16")
Depth: 14 mm (0-9/16")
Height: 56 mm (2-2/16")
Depth: 14 mm (0-9/16")
Weight:
41 g (1.5 oz.) without battery
Sockets:
Earphones (impedance: 32 ohms)
USB port
Line-input socket (150 mV)
USB port
Line-input socket (150 mV)
Frequency
response:
response:
20 - 20,000 Hz
Output power:
5 mW + 5 mW (earphones: 32 ohms)
(maximum output level)
(maximum output level)
Battery life:
Continuous recording:
(alkaline battery)
MIC: Approx. 8 hours
LINE-IN: Approx. 3 hours
FM: Approx. 4 hours
Continuous play: Approx. 15 hours
LINE-IN: Approx. 3 hours
FM: Approx. 4 hours
Continuous play: Approx. 15 hours
Frequency range: FM: 87.5 - 108 MHz
Storage media:
512 MB Flash Memory
(WA-MP50H)
1 GB Flash Memory (WA-MP55H)
(WA-MP50H)
1 GB Flash Memory (WA-MP55H)
Digital Rights
Management:
Management:
Windows Media DRM 9
Playback format:
MP3 (MPEG-1/2 Audio Layer 3),
bit rate: 8 - 320 kbps
WMA (Windows Media Audio),
bit rate: 5 - 320 kbps
bit rate: 8 - 320 kbps
WMA (Windows Media Audio),
bit rate: 5 - 320 kbps
Recording format: MP3 (bit rate: 96 - 224 kbps,
sampling frequency: 32 - 48 kHz)
PCM (sampling frequency: 8 - 32 kHz)
PCM (sampling frequency: 8 - 32 kHz)
PC interface:
Compatible with USB 2.0 and USB
1.1
1.1
System require-
ments:
ments:
Pentium 133 MHz or higher
CD-ROM drive
10 MB free hard disk space
Microsoft Windows 98 Second
Edition/Millennium Edition/2000
Professional/XP Professional/XP
Home Edition standard installation
CD-ROM drive
10 MB free hard disk space
Microsoft Windows 98 Second
Edition/Millennium Edition/2000
Professional/XP Professional/XP
Home Edition standard installation
48
05/5/27
WA-MP50_55H_UK.fm
WA-MP50_55H TINSEA063SJZZ
D
F
S
V
I
N
P
E
1
2
3
4
5
6
7
8
WA-MP50H
WA-MP55H
WA-MP55H
Ref
e
rences
-S
pe
c
ific
a
tions
-
Notes:
!
A combination of sampling frequency and bit rate dif-
fers depending on audio format.
fers depending on audio format.
!
Continuous playback:
At 64 kbps, in WMA format (earphone output: 5 mW +
5 mW, backlight: set to "OFF", equaliser: set to "Nor-
mal")
At 64 kbps, in WMA format (earphone output: 5 mW +
5 mW, backlight: set to "OFF", equaliser: set to "Nor-
mal")
!
Continuous recording:
Microphone recording (PCM), 8,000 Hz
Line-in recording (MP3), 44,100 Hz, 128 kbps
FM radio recording (MP3), 44,100 Hz, 128 kbps
Microphone recording (PCM), 8,000 Hz
Line-in recording (MP3), 44,100 Hz, 128 kbps
FM radio recording (MP3), 44,100 Hz, 128 kbps
!
Actual battery life will vary with use.
!
The values are the standard values when the unit is
used at an ambient temperature of 25°C (77°F).
used at an ambient temperature of 25°C (77°F).
05/5/23
WA-MP50_55H_UK_Back.fm
WA-MP50_55H TINSEA063SJZZ
TERMS OF GUARANTEE
Subject to the terms listed below, Sharp Electronics (U.K.)
Ltd. (hereinafter called “the Company”) guarantee to pro-
vide for the repair of, or at its option replace this Sharp
Equipment, or any component thereof, (other than bat-
teries), which is faulty or below standard, as a result of
inferior workmanship or materials.
Ltd. (hereinafter called “the Company”) guarantee to pro-
vide for the repair of, or at its option replace this Sharp
Equipment, or any component thereof, (other than bat-
teries), which is faulty or below standard, as a result of
inferior workmanship or materials.
The conditions of this guarantee are:
1. The guarantee shall only apply to defects which occur
within one year from the date of purchase, provided
that this equipment is sent to the repair address within
this period.
that this equipment is sent to the repair address within
this period.
2. This guarantee covers equipment intended for private
domestic use only. This guarantee does not apply to
equipment used in the course of a business, trade or
profession.
equipment used in the course of a business, trade or
profession.
3. The guarantee does not cover batteries.
4. This guarantee does not cover any faults or defects
caused by accident, misuse, fair wear and tear, neglect,
tampering with the equipment, or any attempt at ad-
justment or repair other than by a Service Facility ap-
pointed by Sharp.
tampering with the equipment, or any attempt at ad-
justment or repair other than by a Service Facility ap-
pointed by Sharp.
5. In the unlikely event of a defect occuring, the product
must be returned to the Company’s repair centre with
proof of purchase. A postage paid label and a fault re-
port form are supplied with the product for this purpose.
proof of purchase. A postage paid label and a fault re-
port form are supplied with the product for this purpose.
It is your responsibility to ensure that the packaging is
adequate, and to obtain proof of posting.
Further details of the repair service, which is available
after the guarantee period on a chargeable basis, and
additional report forms and labels can be obtained by
telephoning 0870 738 0000.
additional report forms and labels can be obtained by
telephoning 0870 738 0000.
6. No person has any authority to vary the terms or condi-
tions of this guarantee.
7. This guarantee is offered as an additional benefit to
the consumer’s statutory rights and does not affect
these rights in any way.
these rights in any way.
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
9906
TINSEA063SJZZ
05E R YT 1