DOWNLOAD Sharp SD-EX220 Service Manual ↓ Size: 2.09 MB | Pages: 39 in PDF or view online for FREE

SD-EX220H

2

3

4

5

6

7

8

1

SD-EX220H(H)_E.fm

03/6/9

TINSZ0953AWZZ

! CD player

! Remote control

! Condensation

Sudden temperature changes, storage or operation in an extremely humid environ-
ment may cause condensation inside the cabinet (CD pickup, etc.) or on the transmit-
ter on the remote control.
Condensation can cause the unit to malfunction. If this happens, leave the power on
with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any
condensation on the transmitter with a soft cloth before operating the unit.

! If trouble occurs

When this product is subjected to strong external interference (mechanical shock,
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.

If neither operation above restores the unit, clear all the memory by resetting it.

! Clearing all the memory (reset)

This operation will erase all data stored in memory including clock, timer settings,
tuner preset, and CD programme.

! Before transporting the unit

" Even though a disc has been load-

ed, "NO DISC" is displayed.

" Is the disc very dirty?

" Is the unit located near excessive vibra-

tions?

" Has condensation formed inside the unit?

" Playback does not start.

" Is the disc loaded with the label side to-

ward you?

" Playback stops in the middle or is 

not performed properly.

" Does the disc satisfy the standards?

" Is the disc distorted or scratched?

" Playback sounds are skipped, or 

stopped in the middle of a track.

" Is the unit located near excessive vibra-

tions?

" Is the disc very dirty?

" Has condensation formed inside the unit?

" The remote control does not oper-

ate.

" Is the AC power lead of the unit plugged 

in?

" Is the battery polarity correct?

" Are the batteries dead?

" Is the distance or angle incorrect?

" Does the remote control sensor receive 

strong light?

1

Set the unit to the power stand-by mode and turn the power on again.

2

If the unit is not restored in the previous operation, unplug and plug in the unit, and 
then turn the power on.

1

Press the ON/STAND-BY button to enter the power stand-by mode.

2

Whilst pressing down the 

 button and the VOLUME (-) button, press the ON/

STAND-BY button until "RESET" appears.

Carrying the unit with a CD inside can cause 
damage to the unit or the CD.
Please open the CD cover to check the CD 
compartment is empty before transportation. 
(Refer to page 14.)

SD-EX220H

SD-EX220H(H)_E.fm

03/6/9

TINSZ0953AWZZ

! Cleaning the CD pickup lens

Do not touch the laser pickup lens. If fingerprints or dust accumulate on the pickup,
clean it gently with a dry cotton swab.

! Cleaning the cabinet

 

! Care of compact discs

Compact discs are fairly resistant to damage, however mistracking can occur due to
an accumulation of dirt on the disc surface. Follow the guidelines below for maximum
enjoyment from your CD collection and player.
" Do not write on either side of the disc, particularly the non-label side from which

signals are read. Do not mark this surface.

" Keep your discs away from direct sunlight, heat, and excessive moisture.
" Always hold the CDs by the edges. Fingerprints, dirt, or water on the CDs can

cause noise or mistracking. If a CD is dirty or does not play properly, clean it with a
soft, dry cloth, wiping straight out from the centre, along the radius.

Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a 
dry cloth.
 

" Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the 

cabinet finish.

" Do not apply oil to the inside of the unit. It may cause malfunctions.

Pickup lens

" The disc is damaged.

" Replace it with another disc.

" Eusure that the CD is correctly 

inserted with the label side to-
ward you.

" A CD has not been loaded.

" Load a CD.

" The CD data cannot be 

read.

" Reload the CD.

" The cooling fan inside the 

unit does not run due to for-
eign objects around the fan.

" Set this unit to the stand-by 

mode and remove the foreign 
objects around the fan.

SD-EX220H

2

3

4

5

6

7

8

1

SD-EX220H(H)_E.fm

03/6/9

TINSZ0953AWZZ

As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.

! General

 

! Amplifier

! CD player

 

! Tuner

 

! Speaker

AC 230 V, 50 Hz

Power on: 62 W

Power stand-by: 0.9 W

Width: 380 mm (15") 
Height: 200 mm (7-7/8") 
Depth: 120 mm (4-3/4")

3.7 kg (8.2 lbs.)

Speakers: 4 ohms

Headphones: 16 - 50 ohms (recommended: 32 ohms)

Optical digital output

Subwoofer pre-out (audio signal): 200 mV/10 k ohms at 
70 Hz

Auxiliary input: 500 mV/47 k ohms

64fs 1-bit switching (Remarks: fs = 44.1 kHz)

RMS: 160 W (80 W + 80 W) (DIN 45 500)

7th-order     (delta - sigma) modulation

1-disc vertical type compact disc player

Non-contact, 3-beam semiconductor laser pickup

24-bit/96 k D/A converter

20 - 20,000 Hz

101 dB (1 kHz)

FM: 87.5 - 108 MHz

AM: 522 - 1,620 kHz

2-way type speaker system

2 cm (13/16") Tweeter

12 cm (4-3/4") Woofer

160 W

80 W

4 ohms

Width: 270 mm (10-11/16") 
Height: 200 mm (7-7/8") 
Depth: 124 mm (4-15/16")

2.3 kg (5.1 lbs.)/each

03/6/9         SD-EX220H(H)_COMMON.eps                   TINSZ0953AWZZ

SHARP TINSZ0953A

WZZ