Sharp SD-AT1000 User Manual / Operation Manual ▷ View online
E-28
SD-AT1000H_SEEG_E.fm
03/3/14
SD-AT1000H
ENGLISH
2
3
4
5
6
7
8
1
TINSZ0943AWZZ
Ad
v
a
nced
F
e
atures
- Usi
n
g the
Radio Da
ta
S
y
stem (RDS
)
-
"
To recall stations in memory
To specify programmed types and select stations (PTY search):
You can search a station by specifying the programme type (news, sports, traffic pro-
gramme, etc. ... see page 26) from the stations in memory.
gramme, etc. ... see page 26) from the stations in memory.
Notes:
!
If the display has stopped flashing, start again from step 3.
!
If you want to listen to the same programme type of another station, press the
PTY-TI button whilst the channel number or station name is flashing. The unit will
look for the next station.
PTY-TI button whilst the channel number or station name is flashing. The unit will
look for the next station.
!
If no station can be found, "NOTFOUND" will appear for 4 seconds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 4, "TP" will appear. (This does not
mean that you can listen to the traffic information at that time.)
When the traffic information is broadcast, "TA" will appear.
mean that you can listen to the traffic information at that time.)
When the traffic information is broadcast, "TA" will appear.
To specify station names and select stations manually:
You can select a station by specifying the name (BBC R1, BBC R2, etc.) from the sta-
tions stored in memory.
Before starting this operation, you must store one or more station names in memory.
tions stored in memory.
Before starting this operation, you must store one or more station names in memory.
1
Press the TUNER/BAND button to select the FM band.
2
Press the PTY-TI button.
"PTY TI" and "SELECT" will appear alternately for about 6 seconds.
3
Within 6 seconds, press the or button to select the programme
type.
type.
Each time the button is pressed, the programme type will appear. If the button is
held down for more than 0.5 seconds, the programme type will appear continu-
ously.
held down for more than 0.5 seconds, the programme type will appear continu-
ously.
4
Whilst the selected programme type is flashing (within 6 seconds),
press the ENTER button.
press the ENTER button.
After the selected programme type has been lit for 2 seconds, "SEARCH" will ap-
pear, and the search operation will start.
pear, and the search operation will start.
1
Press the TUNER/BAND button to select the FM band.
2
Press the TUNER PRESET ( or ) button to select a desired station.
3
The station name will be displayed for 3 seconds. Then the display will change as
follows.
follows.
E-29
SD-AT1000H_SEEG_E.fm
03/3/14
SD-AT1000H
ENGLISH
TINSZ0943AWZZ
Ad
v
a
nced
F
e
atures
- Time
r a
n
d s
le
e
p
op
e
ra
tion -
Timer and sleep operation
You can use the unit as an alarm clock by setting the timer.
Before setting timer:
"
Setting the timer
Caution:
This unit cannot set the timer of other equipment.
To perform the timer playback using other equipment, you should also set the
timer on the equipment separately.
To perform the timer playback using other equipment, you should also set the
timer on the equipment separately.
1
Set the unit to the correct time (page 16).
If it is not set, you cannot use the timer function.
2
Prepare the sound source for playback.
3
Store radio stations (page 18).
1
Turn the power on and press the TIMER but-
ton.
ton.
Set the unit to the correct time if "TIMER STANDBY"
does not appear.
does not appear.
2
Within 10 seconds, press the or button to
select "TIMER SET", and press the ENTER
button.
select "TIMER SET", and press the ENTER
button.
3
Press the or button to adjust the hour and
then press the ENTER button.
then press the ENTER button.
4
Press the or button to adjust the minutes and then press the
ENTER button.
ENTER button.
The start time is set and the finish time (1 hour later) will be displayed automati-
cally.
cally.
5
Set the time to finish as in steps 3 and 4 above.
6
Switch input with the or button,
and then press the ENTER button.
and then press the ENTER button.
!
When you select the tuner, select a sta-
tion by pressing the or button, and
then press the ENTER button.
tion by pressing the or button, and
then press the ENTER button.
!
If a station has not been programmed,
"NO P-SET" will be displayed.
"NO P-SET" will be displayed.
7
Adjust the volume with the or button and press the ENTER but-
ton.
ton.
Settings are displayed in order and the unit will enter the timer stand-by mode.
DIGITAL1
DIGITAL2
LINE1
LINE3
TUNER
LINE2
E-30
SD-AT1000H_SEEG_E.fm
03/3/14
SD-AT1000H
ENGLISH
2
3
4
5
6
7
8
1
TINSZ0943AWZZ
Ad
v
a
nced
F
e
atures
- Time
r a
n
d s
le
e
p
op
e
ra
tion -
When the timer setting is completed:
To check the timer setting:
The unit is in the timer playback
stand-by mode.
stand-by mode.
When the start time is reached:
Playback starts automatically and the volume
increases gradually.
increases gradually.
When the finish time is reached:
The unit is set to the power stand-by mode automatically.
Caution:
The contents of the setting will be erased if the unit is unplugged or a power failure
occurs. In such cases, set the timer again.
occurs. In such cases, set the timer again.
Timer play indicator flashes
The unit is operated by the timer.
1 Whilst in the timer playback stand-by mode,
press the TIMER button.
2 Within 10 seconds, press the or button to select "TIMER CALL", and
press the ENTER button.
The unit returns to the timer playback stand-by mode after the setting contents
are displayed in order.
The unit returns to the timer playback stand-by mode after the setting contents
are displayed in order.
Cancelling the timer playback:
Timer playback is cancelled by turning the power on whilst in the timer playback
stand-by mode. The same operation can be performed in the following procedure
without turning the power on.
stand-by mode. The same operation can be performed in the following procedure
without turning the power on.
1 Press the TIMER button.
"TIMER CANCEL" will appear.
2 Within 10 seconds, press the ENTER button.
Timer playback will be cancelled (the contents of the setting will not be cancel-
led).
led).
Reusing the timer:
Using the same setting;
Using the same setting;
The timer setting will be memorised once it is entered. To reuse the same setting,
perform the following operations.
perform the following operations.
1 Turn the power on and press the TIMER button.
"TIMER STANDBY" will appear. If it does not appear, set the unit to the correct
time.
time.
2 Within 10 seconds, press the ENTER button.
After the setting contents are displayed in order, the unit is set to the timer
playback stand-by mode.
playback stand-by mode.
Changing the setting;
Turn the power on, and repeat the operation from step 1 in "Setting the timer"
(page 29).
(page 29).
After completing the setting
The timer setting is canceled.
E-31
SD-AT1000H_SEEG_E.fm
03/3/14
SD-AT1000H
ENGLISH
TINSZ0943AWZZ
Ad
v
a
nced
F
e
atures
- Time
r a
n
d s
le
e
p
op
e
ra
tion -
Timer and sleep operation (continued)
"
Setting the sleep timer
You can set the unit to the power stand-by mode at the specified time.
Caution:
This unit cannot set the sleep timer of other equipment.
To use the sleep timer using other equipment, you should also set the timer on
the equipment separately.
To use the sleep timer using other equipment, you should also set the timer on
the equipment separately.
To confirm the remaining sleep time:
!
The remaining sleep time is displayed for about 10 seconds.
!
You can change the remaining sleep time whilst it is displayed by pressing the
ENTER button (steps 3 - 4).
ENTER button (steps 3 - 4).
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the stand-by mode, pro-
ceed as follows.
To cancel the sleep operation without setting the system to the stand-by mode, pro-
ceed as follows.
"
To use timer and sleep operation together
You can fall asleep and wake up to the radio.
1
During playback, press the TIMER button.
2
Within 10 seconds, press the or button to
select "SLEEP SET", and press the ENTER
button.
select "SLEEP SET", and press the ENTER
button.
3
Press the or button to select the time.
(Maximum: 2 hours - Minimum: 1 minute)
!
2 hours - 5 minutes 5-minute intervals
!
5 minutes - 1 minute 1-minute intervals
4
Press the ENTER button.
"SLEEP" will appear.
5
The unit will enter the power stand-by mode automatically after the
preset time has elapsed.
preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes, and
then you cannot change the volume.
then you cannot change the volume.
1
Whilst "SLEEP" is indicated, press the TIMER button.
2
Within 10 seconds, press the or button to select "SLEEP".
1
Press the TIMER button.
2
Within 10 seconds, press the or button to select "SLEEP OFF", and press the
ENTER button.
ENTER button.
1
Set the sleep timer (steps 1 - 4).
Sleep operation starts.
2
Set the timer playback.
("Setting the timer" on page 29, steps 1 - 7)
Remaining sleep time
Sleep timer setting
Timer playback setting
Timer playback
starts.
starts.
Timer playback will
automatically stop.
automatically stop.
Sleep operation will
automatically stop.
automatically stop.
Sleep operation
starts.
starts.
Desired time
1minute - 2hours
Start time
Finish time
1 minute - 2 hours
1
2
Click on the first or last page to see other SD-AT1000 service manuals if exist.