Sharp QT-V5E (serv.man2) User Manual / Operation Manual ▷ View online
13
04/6/8
QT-V5E_UK_2.fm
9HX80432100003
QT-V5E
2
3
4
5
6
7
8
1
Prepara
tion f
o
r U
s
e
- Ba
tt
er
y ins
ta
llat
ion / T
u
rn
ing
t
h
e
po
w
e
r
on
-
Battery installation
Precautions for battery use:
!
Replace all old batteries with new ones at the same time.
!
Do not mix old and new batteries.
!
Remove the batteries if the unit is not to be used for long periods of time. This will
prevent potential damage due to battery leakage.
prevent potential damage due to battery leakage.
Caution:
!
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
!
Incorrect installation may cause the unit to malfunction.
Notes concerning use:
!
Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 "AAA" size batteries (UM-4, R03, HP-16 or similar).
becomes erratic. Purchase 2 "AAA" size batteries (UM-4, R03, HP-16 or similar).
!
Periodically clean the transmitter on the remote control and the sensor on the unit
with a soft cloth.
with a soft cloth.
!
Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.
Change the lighting or the direction of the unit.
!
Keep the remote control away from moisture, heat, shock, and vibrations.
Turning the power on
"
To turn the power on
1
Set the ON/STAND-BY switch on the main unit to ON.
2
When the ON/STAND-BY switch on the main unit is set to ON, you
can also turn the power on or put the unit in the stand-by mode
using the ON/STAND-BY button on the remote control.
can also turn the power on or put the unit in the stand-by mode
using the ON/STAND-BY button on the remote control.
"
Test of the remote control
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy music.
1
Remove the battery cover.
2
Insert the 2 supplied "AAA" size batteries (UM-4, R03, HP-16 or sim-
ilar) according to the direction indicated in the battery compart-
ment.
ilar) according to the direction indicated in the battery compart-
ment.
When inserting or removing the batteries, push them towards the battery termi-
nals.
nals.
3
Replace the cover.
After use:
When not using this unit, set the ON/STAND-BY switch on the main unit to .
1
2
Remote sensor
0.2 m - 6 m
QT-V5E 9HX80432100003
3
14
04/6/8
QT-V5E_UK_2.fm
9HX80432100003
QT-V5E
Prepara
tion f
o
r U
s
e
-
S
e
tti
ng the
c
loc
k
-
Setting the clock
The clock can only be set using the buttons on the remote control.
In this example, the clock is set for the 12-hour (AM 12:00) display.
In this example, the clock is set for the 12-hour (AM 12:00) display.
To confirm the time display:
Press the CLOCK button for less than 0.5 seconds whilst the main unit turns the
power on.
The time display will appear for about 5 seconds.
power on.
The time display will appear for about 5 seconds.
To readjust the clock:
Perform "Setting the clock" from step 1.
To change the 12-hour or 24-hour display:
Note:
Insert memory batteries to keep the clock setting even after unplugging the unit.
Insert memory batteries to keep the clock setting even after unplugging the unit.
1
Press the ON/STAND-BY switch on the main unit to turn the power
on.
on.
2
Press the CLOCK button.
3
Within 5 seconds, press the button to se-
lect the hour.
lect the hour.
4
Within 5 seconds, press the or button
to adjust the hour.
to adjust the hour.
Press the or button once to advance the time by
1 hour. Hold it down to advance continuously.
1 hour. Hold it down to advance continuously.
5
Within 5 seconds, press the button to se-
lect the minute.
lect the minute.
6
Within 5 seconds, press the or button
to adjust the minute.
to adjust the minute.
Press the or button once to advance the time by 1 minute. Hold it down to
advance continuously.
advance continuously.
7
Within 5 seconds, press the ENTER button.
When the time is displayed, press the DISPLAY button for 0.5 seconds or more to se-
lect the 12-hour or 24-hour display.
lect the 12-hour or 24-hour display.
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
(AM 12:00 - PM 11:59)
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
(0:00 - 23:59)
15
04/6/8
QT-V5E_UK_2.fm
9HX80432100003
QT-V5E
2
3
4
5
6
7
8
1
Prepara
tion f
o
r U
s
e
- Ge
ne
ra
l c
o
ntr
o
l -
General control
Some of these functions are only available on the remote control.
"
To change the display brightness (3 levels)
You can switch the display brightness by pressing the DIMMER button.
Each time the button is pressed, the display brightness changes in the following
order.
Each time the button is pressed, the display brightness changes in the following
order.
"
Adjusting the volume
"
Emphasising the bass
"
Setting surround effects
"
Changing the sound quality
Press the VOLUME + button to increase the volume and
the VOLUME - button to decrease the volume.
You can also use the VOLUME + or VOLUME - button on
the main unit.
the VOLUME - button to decrease the volume.
You can also use the VOLUME + or VOLUME - button on
the main unit.
1
Press the SOUND MODE button repeatedly to select "XBS OFF".
2
Within 5 seconds, press the or button to select "XBS ON".
Increase
Unchanged
To cancel, select "XBS OFF".
Brightened
OFF
Dimmed
00 01 31 32
1
Press the SOUND MODE button repeatedly to select "SUR OFF".
2
Within 5 seconds, press the or button to select "SUR ON".
To cancel the surround, select "SUR OFF".
1
Press the SOUND MODE button repeatedly to select "FLAT".
2
Within 5 seconds, press the or button to select the desired
sound quality "FLAT", "CUSTOM", "ROCK", "POP", "JAZZ" or
"CLASSIC".
sound quality "FLAT", "CUSTOM", "ROCK", "POP", "JAZZ" or
"CLASSIC".
When "CUSTOM" is selected in step 2, you can adjust the bass and
treble.
treble.
1 Press the or button to select "TREB", or "BASS".
2 Within 5 seconds, press the or button to adjust the treble or the bass.
FLAT CUSTOM ROCK POP JAZZ CLASSIC
FLAT : The sound is not modified.
CUSTOM : Customise the bass and treble levels.
CUSTOM : Customise the bass and treble levels.
-7 7
-7 7
16
04/6/8
QT-V5E_UK_3.fm
9HX80432100003
QT-V5E
D
V
D Oper
ation
- D
V
D pla
y
ba
c
k
-
DVD playback
Turn on the TV, and switch the input to the "VIDEO 1", "VIDEO 2", etc.
accordingly.
accordingly.
"
Playback
1
Press the ON/STAND-BY switch on the
main unit to turn the power on.
main unit to turn the power on.
!
The startup screen appears.
!
When the disc input mode is not selected, press
the STOP button to display the startup screen.
the STOP button to display the startup screen.
!
If the startup screen does not appear, make sure
the correct video input is selected on the TV .
the correct video input is selected on the TV .
!
If the initial setting screen is blurred, press the NTSC/PAL button repeatedly
whilst holding down the SHIFT button to change the TV type (see page 23).
whilst holding down the SHIFT button to change the TV type (see page 23).
2
Press the OPEN/CLOSE button to open the disc tray.
3
Place the disc on the disc tray, label side up.
Be sure to place 8 cm discs in the middle of the tray.
4
Press the OPEN/CLOSE button to close the disc tray.
Discs supporting auto start will start to play once you close the disc tray even if
you do not press the PLAY/PAUSE / button.
you do not press the PLAY/PAUSE / button.
5
If playback does not start, press the PLAY/PAUSE / button.
DVD
VideoCD
CD
VideoCD
CD
Audio Visual
Entertainment
Entertainment
NO DISC
Disc tray
Label side
Click on the first or last page to see other QT-V5E (serv.man2) service manuals if exist.