Sharp HT-X1H User Manual / Operation Manual ▷ View online
04/10/18
HT-X1H(E)3.fm
21
HT-X1H
TINSEA037SJZZ
Pre
p
aration
for Use
!
TV connection
Three types of sockets [AV (TV), S-VIDEO and VIDEO] are avail-
able for connection of a TV and the main unit. Connect according to
your TV.
able for connection of a TV and the main unit. Connect according to
your TV.
Connecting to a TV with SCART socket:
You can enjoy DVD images by connecting your TV and the main
unit with the supplied SCART cable.
You can enjoy DVD images by connecting your TV and the main
unit with the supplied SCART cable.
Connecting to a TV with an S-video input socket:
If your TV is equipped with an S-video input socket, you can enjoy
higher quality images by connecting it with an S-video cable (not
supplied).
If your TV is equipped with an S-video input socket, you can enjoy
higher quality images by connecting it with an S-video cable (not
supplied).
Note:
When the video and S-video cables are both connected, the images
from the S-video input socket appears on your TV.
Set the video output mode to "SCART" (default setting). For the
procedure, refer to "Changing the initial setting of DVD" on pages
59, 61.
procedure, refer to "Changing the initial setting of DVD" on pages
59, 61.
TV
Main unit
To SCART input
socket
socket
To SCART
[AV (TV)]
output socket
[AV (TV)]
output socket
Video/audio signal
SCART cable (supplied)
Set the video output mode to "S-Video". For the procedure, refer to
"Changing the initial setting of DVD" on pages 59, 61.
"Changing the initial setting of DVD" on pages 59, 61.
Main unit
TV
To S-video
input socket
input socket
To S-video
output socket
output socket
Video signal
S-video cable
(commercially available)
(commercially available)
HT-X1H (E) TINSEA037SJZZ
4
2
04/10/18
HT-X1H(E)3.fm
22
HT-X1H
TINSEA037SJZZ
Pre
p
aration
for Use
System connections (continued)
Connecting to a TV with a video input socket:
If your TV is equipped only with a video input socket (without
SCART), connect a video cable (not supplied) to enjoy images.
If your TV is equipped only with a video input socket (without
SCART), connect a video cable (not supplied) to enjoy images.
!
Attaching the back cover
After making all the connections, attach the back cover to the main
unit. Fit the claws into the holes.
unit. Fit the claws into the holes.
!
Headphones
"
Before plugging in or unplugging the headphones, reduce the
volume.
volume.
"
Be sure your headphones have a 3.5 mm diameter plug and are
between 16 ohms and 50 ohms impedance. The recommended
impedance is 32 ohms.
between 16 ohms and 50 ohms impedance. The recommended
impedance is 32 ohms.
"
Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
cally. Adjust the volume using the VOLUME control.
Set the video output mode to "S-Video". For the procedure, refer to
"Changing the initial setting of DVD" on pages 59, 61.
"Changing the initial setting of DVD" on pages 59, 61.
Notes:
"
Change the TV input in accordance with the connected socket.
"
Do not connect other equipment (VCR, etc.) between the TV and
the main unit. Images may be distorted.
the main unit. Images may be distorted.
"
Refer to the operation manual of the equipment to be connected.
"
Insert the plugs fully to avoid fuzzy pictures or noise.
Main unit
TV
To video
input socket
input socket
To video
output socket
output socket
Video signal
Video cable
(commercially available)
(commercially available)
04/10/18
HT-X1H(E)3.fm
23
HT-X1H
TINSEA037SJZZ
Pre
p
aration
for Use
!
Connecting the AC power lead
After checking all the connections have been made correctly, plug
the AC power lead to the AC power input socket of the subwoofer/
amplifier unit, and then to the wall socket.
the AC power lead to the AC power input socket of the subwoofer/
amplifier unit, and then to the wall socket.
Notes:
"
Never use a power lead other than the one supplied. Otherwise,
a malfunction or an accident may occur.
a malfunction or an accident may occur.
"
Unplug the AC power lead from the wall socket if the subwoofer/
amplifier unit will not be in use for a prolonged period of time.
amplifier unit will not be in use for a prolonged period of time.
!
To turn the power on
Press the ON/STAND-BY button.
If the power does not turn on, check if the AC power lead and sys-
tem connection cable are plugged in properly.
If the power does not turn on, check if the AC power lead and sys-
tem connection cable are plugged in properly.
To set the system to stand- by mode:
Press the ON/STAND-BY button again.
Press the ON/STAND-BY button again.
Note:
After the system enters the power stand- by mode, wait a few sec-
onds to turn on again.
After the system enters the power stand- by mode, wait a few sec-
onds to turn on again.
Cooling fan:
A cooling fan is built into this subwoofer/amplifier unit for better heat
radiation. Do not cover the opening in this section with any obsta-
cles to avoid damage to the subwoofer/amplifier unit.
radiation. Do not cover the opening in this section with any obsta-
cles to avoid damage to the subwoofer/amplifier unit.
Wall socket
(AC 230 V, 50 Hz)
(AC 230 V, 50 Hz)
Subwoofer/
amplifier unit
Cooling fan
Subwoofer/
amplifier unit
Main unit
2
04/10/18
HT-X1H(E)3.fm
24
HT-X1H
TINSEA037SJZZ
Pre
p
aration
for Use
Remote control
!
Battery installation
Precautions for battery use:
"
Replace all old batteries with new ones at the same time.
"
Do not mix old and new batteries.
"
Remove the batteries if the system will not be used for long peri-
ods of time. This will prevent potential damage due to battery
leakage.
ods of time. This will prevent potential damage due to battery
leakage.
Caution:
"
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
"
Installing the batteries incorrectly may cause the system to mal-
function.
function.
Battery removal:
Remove the battery cover. Push each battery toward the battery
terminal and take them out.
Remove the battery cover. Push each battery toward the battery
terminal and take them out.
Notes concerning use:
"
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic.
operation becomes erratic.
"
Periodically clean the transmitter on the remote control and the
sensor on the main unit with a soft cloth.
sensor on the main unit with a soft cloth.
"
Exposing the sensor on the main unit to strong light may interfere
with operation. Change the lighting or the direction of the main
unit if this occurs.
with operation. Change the lighting or the direction of the main
unit if this occurs.
"
Keep the remote control away from moisture, heat, shock, and
vibrations.
vibrations.
!
Test of the remote control
Check the remote control after checking all the connections (see
pages 18 - 23).
Point the remote control directly at the remote sensor on the main
unit.
pages 18 - 23).
Point the remote control directly at the remote sensor on the main
unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now,
you can enjoy music.
Press the ON/STAND-BY button. Does the power turn on? Now,
you can enjoy music.
"
The main unit is equipped with 2 remote sensors. Use them
according to the installation method as shown below.
according to the installation method as shown below.
Use 2 "AAA" size batteries (UM-4, R03, HP-16 or similar).
Batteries are not included.
Batteries are not included.
1
Remove the battery cover.
2
Insert the supplied batteries according to the direction indi-
cated in the battery compartment.
cated in the battery compartment.
When inserting or removing the batteries, push them toward the
battery terminals.
3
Replace the cover.
0.2 m - 6 m
Remote sensor
Main unit
Click on the first or last page to see other HT-X1H service manuals if exist.