Sharp HT-X1H User Manual / Operation Manual ▷ View online
04/10/18
HT-X1H(E)2.fm
17
HT-X1H
TINSEA037SJZZ
Pre
p
aration
for Use
Main unit preparation
Button name label
Placing horizontally
Notes:
Caution:
Stand
When attaching or removing the stand, place the main unit on
a cushion or soft cloth to avoid damage.
Remove the only specified screws. Malfunction may occur. Be
careful not to lose the removed screws.
a cushion or soft cloth to avoid damage.
Remove the only specified screws. Malfunction may occur. Be
careful not to lose the removed screws.
Note:
Attach the button name label carefully. It is difficult to peel off.
The stand is attached to the main unit at the factory.
Make sure to unplug the AC power lead before installing
the main unit or change the position.
the main unit or change the position.
You can also place the main unit horizontally or mount it on the
wall without the stand.
(See page 66 for mounting it on the wall.)
wall without the stand.
(See page 66 for mounting it on the wall.)
Do not change the installation direction when the main unit is
turned on. Disc may not be read or may be damaged.
turned on. Disc may not be read or may be damaged.
Installation methods
1
Remove the 2 screws
and the stand.
2
Fix the removed screws.
3
Attach the included
button name label.
Stand
2
04/10/18
HT-X1H(E)2.fm
18
HT-X1H
TINSEA037SJZZ
Pre
p
aration
for Use
System connections
"
Make sure to disconnect the AC power lead from the wall socket before you connect/disconnect cables to/from sockets inside
the back cover of the main unit or sockets of the subwoofer/amplifier unit.
the back cover of the main unit or sockets of the subwoofer/amplifier unit.
"
After connecting cables, attach the back cover before you operate the main unit.
Subwoofer/
amplifier unit
amplifier unit
Aerial connection
(see page 19)
Connecting
the AC
power lead
the AC
power lead
(see page 23)
TV connection
(see page 21)
Speaker connection
(see page 20)
Surround speaker
(left)
Surround speaker
(right)
Front speaker
(left)
Centre
speaker
Front speaker
(right)
White
Red
Green
Blue
Grey
White
Grey
Blue
Green
Red
Main unit
Connecting the system
connection cable
connection cable
(see page 19)
AM loop aerial
FM aerial
04/10/18
HT-X1H(E)2.fm
19
HT-X1H
TINSEA037SJZZ
Pre
p
aration
for Use
!
Connecting the system connection cable
Connect the main unit and subwoofer/amplifier unit as follows.
!
Aerial connection
Note:
Placing the aerial on the system or near the AC power lead may cause
noise pickup. Place the aerial away from the system for better reception.
Placing the aerial on the system or near the AC power lead may cause
noise pickup. Place the aerial away from the system for better reception.
Installing the AM loop aerial:
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception.
Consult your dealer.
When using an external AM aerial, be sure to keep the wire of the
AM loop aerial connected.
Use an external FM or AM aerial if you require better reception.
Consult your dealer.
When using an external AM aerial, be sure to keep the wire of the
AM loop aerial connected.
Subwoofer/
amplifier unit
amplifier unit
1
2
Main unit
1
2
Black
Blue
Blue
Black
Aerial terminals
Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial
wire in the direction where the strongest
signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the
AM and GND terminals. Position the AM
loop aerial for optimum reception. Place
the AM loop aerial on a shelf, etc., or at-
tach it to a stand or a wall with screws
(not supplied).
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial
wire in the direction where the strongest
signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the
AM and GND terminals. Position the AM
loop aerial for optimum reception. Place
the AM loop aerial on a shelf, etc., or at-
tach it to a stand or a wall with screws
(not supplied).
< Assembling >
< Attaching to the wall >
Wall Screws (not supplied)
FM
aerial
aerial
AM loop
aerial
aerial
AM loop
aerial
External AM aerial
15 m
7.5 m
External
FM aerial
FM aerial
Earth wire
Earth rod
2
04/10/18
HT-X1H(E)2.fm
20
HT-X1H
TINSEA037SJZZ
Pre
p
aration
for Use
System connections (continued)
!
Speaker connection
To prevent accidental short circuits between and terminals,
connect the speaker wires to the speakers first and then to the
subwoofer/amplifier unit.
connect the speaker wires to the speakers first and then to the
subwoofer/amplifier unit.
When connecting speakers, match the colours of the back
label, tube for the speaker wire, and speaker terminal of the
subwoofer/amplifier unit.
label, tube for the speaker wire, and speaker terminal of the
subwoofer/amplifier unit.
Caution:
"
The supplied speakers are exclusively for the HT-X1H. Do
not connect them to other equipment, and do not connect
other speakers to the HT-X1H. It may cause malfunction.
not connect them to other equipment, and do not connect
other speakers to the HT-X1H. It may cause malfunction.
"
Do not mistake the and , and right and left terminals of the
speaker wires. (The right speaker is placed on the right when you
face the subwoofer/amplifier unit.)
speaker wires. (The right speaker is placed on the right when you
face the subwoofer/amplifier unit.)
"
Do not stand or sit on the speakers. You may be injured.
"
Do not allow any objects to fall into or to be placed in the bass
reflex ducts.
reflex ducts.
!
Attaching the optional floor speaker stand
The front speakers and surround speakers support the optional floor
speaker stand (see page 69). Remove the original stand for each
speaker using a screwdriver first. For details, refer to the manual for
the floor speaker stand.
speaker stand (see page 69). Remove the original stand for each
speaker using a screwdriver first. For details, refer to the manual for
the floor speaker stand.
Note:
Keep the removed speaker stands or screw in a safe place.
Keep the removed speaker stands or screw in a safe place.
Make sure to leave the AC power lead disconnected when con-
necting the speakers.
necting the speakers.
Subwoofer/
amplifier unit
amplifier unit
Example :To connect the left front speaker.
1
Connect the wires to the speakers.
Red
Red
Black
Black
2
Connect the other end to the
subwoofer/amplifier unit.
subwoofer/amplifier unit.
Tube (white)
Tube (white)
Speaker
terminal
(white)
terminal
(white)
Label (white)
"
The speaker grilles are not removable.
"
Do not short-circuit the speaker wire. If it
happens with the power on, the protection
circuit is activated and the system enters the
stand-by mode. In this case, check that the
speaker wire is connected correctly before
turning on the power again.
happens with the power on, the protection
circuit is activated and the system enters the
stand-by mode. In this case, check that the
speaker wire is connected correctly before
turning on the power again.
Incorrect
Click on the first or last page to see other HT-X1H service manuals if exist.