Sharp HT-SB400H (serv.man2) User Manual / Operation Manual ▷ View online
9
HT-SB400
2009 August 7
HT-SB400_A6_EN_1-17.fm
2
Preparation f
or Use
Caution:
●
Be very careful to prevent the speaker [2.15 kg (4.74 lbs.)]
from falling when mounting on the wall.
from falling when mounting on the wall.
●
Before mounting, check the wall strength. (Do not put on the
veneer plaster or whitewashed wall. The speaker may fall.) If
unsure, consult a qualified service technician.
veneer plaster or whitewashed wall. The speaker may fall.) If
unsure, consult a qualified service technician.
●
Mounting screws are not supplied. Use appropriate ones.
●
Check all wall mount angle screws for looseness.
●
Select a good location. If not, accidents may occur or the
speaker may get damaged.
speaker may get damaged.
●
SHARP is not responsible for accidents resulting from
improper installation.
improper installation.
■
Driving screws
SHARP designed the speakers so you may hang them on the
wall. Use proper screws (not supplied). See below for size and
type.
wall. Use proper screws (not supplied). See below for size and
type.
■
Wall mount angle fixed to the wall
(Horizontal position)
(Horizontal position)
continued to the next page
To mount the speaker on the wall.
3.2 mm (1/8")
9 mm (3/8")
Min. 22 mm (7/8")
5 mm
(3/16")
(3/16")
1
Fix the pattern paper to the wall in horizontal position
as below.
as below.
2
Make a hole on the wall following the screw point
marks on the pattern paper by using a drill.
marks on the pattern paper by using a drill.
3
Fix a wall mount plug into the hole using a hammer,
until it is flush with the wall surface.
until it is flush with the wall surface.
29 mm
29 mm
44 mm
44 mm
509 mm
Pattern paper
Wall surface
Wall surface
8 - 9 mm (3/8")
32 mm (1 - 1/4")
Wall surface
8 - 9 mm (3/8")
32 mm (1 - 1/4")
10
HT-SB400
2009 August 7
HT-SB400_A6_EN_1-17.fm
Preparation f
or Use
Speaker preparation (continued)
Note:
Make sure all screws are fully tightened. (screws are not
supplied)
supplied)
■
Installing the speaker
4
Screw the wall mount angle to the wall as shown in the
illustration. (Total screw is 8 pieces)
illustration. (Total screw is 8 pieces)
Wall surface
Wall mount angle
Wall mount angle
Wall surface
Wall surface
Wall mount angle
(screws x 4)
(screws x 4)
1
Align the wall mount slot at the speaker to the wall
mount angle.
mount angle.
2
Slot the speaker into the wall mount angle.
3
Fix them securely.
SO
UN
D B
AR
SY
ST
EM
HT
-SB
400
SO
UN
D B
AR
SY
ST
EM
HT
-SB
400
VOL
VOL
STA
NDA
RD
STA
NDA
RD
SPO
RT
SPO
RT
NEW
S
NEW
S
CINE
MA/
GAM
E
CINE
MA/
GAM
E
FUN
CTIO
N
FUN
CTIO
N
ON/S
TAN
D-BY
ON/S
TAN
D-BY
VOL
VOL
Wall surface
11
HT-SB400
2009 August 7
HT-SB400_A6_EN_1-17.fm
2
Preparation f
or Use
Placing the speaker
Installation image:
Place the speaker as shown.
Notes:
●
As the sound from the speaker is omni-directional, you can
place the speaker anywhere you like. However, it is
recommended to place it as close to the TV as possible.
place the speaker anywhere you like. However, it is
recommended to place it as close to the TV as possible.
●
The front panel of the speaker is not removable.
Caution:
●
Do not change the installation direction when the speaker is
turned on.
turned on.
●
Do not stand or sit on the speaker as you may be injured.
■
Using other subwoofer
You can connect a subwoofer with an amplifier to the
SUBWOOFER PRE-OUT socket.
SUBWOOFER PRE-OUT socket.
Note:
No sound is heard from the subwoofer without a built-in
amplifier.
amplifier.
SOUND BAR SYSTEM HT-SB400
SOUND BAR SYSTEM HT-SB400
VOL
VOL
STANDARD
STANDARD
SPORT
SPORT
NEWS
NEWS
CINEMA/GAME
CINEMA/GAME
FUNCTION
FUNCTION
ON/STAND-BY
ON/STAND-BY
VOL
VOL
TV
VCR
DVD player
SUBWOOFER
SUBWOOFER
PRE-OUT
PRE-OUT
Audio signal
Audio cable
(commercially
available)
(commercially
available)
Commercially available
subwoofer
(amplifier built in)
To audio input
socket
socket
To SUBWOOFER PRE-
OUT socket
OUT socket
Speaker
12
HT-SB400
2009 August 7
HT-SB400_A6_EN_1-17.fm
Preparation f
or Use
Falling prevention
Safety wires (not supplied) are useful to prevent the speaker
from falling off the table.
from falling off the table.
Loop the safety wires (not supplied) into each hole as shown
and tie the safety wires to the LCD TV stand.
and tie the safety wires to the LCD TV stand.
Speaker connections to TVs
Caution:
Turn off all other equipment before making any connections.
Tuner receiving for other audio system
●
Placing the aerial near the speaker AC power lead may cause
noise pick up. Place the aerial away from the speaker for
better reception.
noise pick up. Place the aerial away from the speaker for
better reception.
Notes:
●
To connect to TV, use either LINE IN 1 sockets or AUDIO
LINE IN 2 socket only.
LINE IN 2 socket only.
●
Refer the operation manual of the equipment to be
connected.
connected.
●
Fully insert the plugs to avoid fuzzy pictures or noises.
■
Connecting to a TV
If the TV/monitor has an audio output, connect it to the LINE IN
1 sockets on the rear of the speaker.
1 sockets on the rear of the speaker.
LEFT
LEFT
RIGHT
RIGHT
AUDIO
AUDIO
LINE IN 1
LINE IN 1
DC IN
DC IN
LINE IN 2
LINE IN 2
To audio output sockets
RCA cable (supplied)
Speaker
TV
To LINE IN 1
sockets
sockets
Click on the first or last page to see other HT-SB400H (serv.man2) service manuals if exist.