Sharp HT-SB400H (serv.man2) User Manual / Operation Manual ▷ View online
13
HT-SB400
2009 August 17
HT-SB400_A6_EN_1-17.fm
2
Preparation f
or Use
■
Connecting to a TV (with Headphone socket)
If the TV/monitor has headphone socket, connect it to the
AUDIO LINE IN 2 socket on the rear of the speaker.
AUDIO LINE IN 2 socket on the rear of the speaker.
Notes:
●
If the TV volume is continuously in low level, the speaker will
automatically power off. Increase the TV output volume to
enjoy the sound from the speaker.
automatically power off. Increase the TV output volume to
enjoy the sound from the speaker.
●
If the speaker volume is continuously in very high level, the
speaker will mute and recover after several seconds.
speaker will mute and recover after several seconds.
●
The Information Display on the sound bar system will not
display anything when increasing or decreasing the volume
level.
display anything when increasing or decreasing the volume
level.
AC power connection
■
Using with the AC/DC adaptor
Notes:
●
Unplug the AC/DC adaptor from the wall socket if the speaker
will not be used for a prolonged period of time.
will not be used for a prolonged period of time.
●
Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
adaptor may cause an electric shock or fire.
HEADPHONE
LEFT
LEFT
RIGHT
RIGHT
AUDIO
AUDIO
LINE IN 1
LINE IN 1
DC IN
DC IN
LINE IN 2
LINE IN 2
To HEADPHONE socket
Audio cable
(3.5 mm/stereo socket)
(not supplied)
Speaker
TV
To AUDIO LINE
IN 2 socket
IN 2 socket
1
Plug the AC power lead into the AC/DC adaptor.
2
Plug the AC/DC adaptor cable into the DC INPUT
socket on the speaker.
socket on the speaker.
3
Plug the AC power lead into wall socket. The STAND-
BY indicator will turn ORANGE when AC power is
applied. The power indicator will turn GREEN when the
system in “ON”.
BY indicator will turn ORANGE when AC power is
applied. The power indicator will turn GREEN when the
system in “ON”.
LEFT
LEFT
RIGHT
RIGHT
AUDIO
AUDIO
LINE IN 1
LINE IN 1
DC IN
DC IN
LINE IN 2
LINE IN 2
2
1
3
AC/DC Adaptor Cable
DC INPUT socket
(DC 12V)
AC/DC Adaptor
Wall socket
(AC 100 - 240 V ~ 50/60 Hz)
AC power lead
14
HT-SB400
2009 August 7
HT-SB400_A6_EN_1-17.fm
Preparation f
or Use
Remote control
■
Battery installation
Precautions for battery use:
●
Remove the battery if the speaker will not be used for long
periods of time. This will prevent potential damage due to
battery leakage.
periods of time. This will prevent potential damage due to
battery leakage.
Caution:
●
Do not use rechargeable battery (nickel-cadmium battery, etc.).
●
Danger of explosion if battery is incorrectly replaced.
●
Replace only with the same or equivalent type.
●
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
exposed to excessive heat such as sunshine, fire or the like.
●
Installing the battery incorrectly may cause the speaker to
malfunction.
malfunction.
Notes concerning use:
●
Replace the battery if the operating distance is reduced or if
the operation becomes erratic. Purchase “CR 2025”, coin
lithium battery.
the operation becomes erratic. Purchase “CR 2025”, coin
lithium battery.
●
Periodically clean the transmitter on the remote control and
the sensor on the speaker with a soft cloth.
the sensor on the speaker with a soft cloth.
●
Exposing the sensor on the speaker to strong light may
interfere with operation. Change the lighting or the direction
of the speaker if this occurs.
interfere with operation. Change the lighting or the direction
of the speaker if this occurs.
●
Keep the remote control away from moisture, heat, shock,
and vibrations.
and vibrations.
■
Test of the remote control
Point the remote control directly at the remote sensor on the
speaker.
speaker.
The remote control can be used within the range shown
below:
below:
Press the ON/STAND-BY button. Does the power turn on? Now,
you can enjoy your system.
you can enjoy your system.
1
Insert pin into the hole as shown and pull to open the
battery holder.
battery holder.
2
Remove the old battery from the battery holder, insert
the new battery and then slide the battery holder back
into the remote control.
the new battery and then slide the battery holder back
into the remote control.
Back of
remote control
Pin
Battery holder
Polarity (+) symbol
Battery type
Locking tab
Positive (+) side up
SOUND BAR SYSTEM HT-SB400
SOUND BAR SYSTEM HT-SB400
VOL
VOL
STANDARD
STANDARD
SPORT
SPORT
NEWS
NEWS CINEMA/GAME
CINEMA/GAME
FUNCTION
FUNCTION
ON/STAND-BY
ON/STAND-BY
VOL
VOL
15˚
15˚
Remote sensor
0.2 m - 6 m
(8” - 20’)
15
HT-SB400
2009 August 7
HT-SB400_A6_EN_1-17.fm
2
Basic Operation
General control
■
To turn the power on
Press the ON/STAND-BY button on the remote control or touch
anywhere on the display panel. All the indicators will be
displayed to indicate pad positions.
anywhere on the display panel. All the indicators will be
displayed to indicate pad positions.
●
The power indicator turns green. If the power does not turn
on, check whether the power lead is plugged in properly.
on, check whether the power lead is plugged in properly.
To set the speaker to stand-by mode:
●
Press the ON/STAND-BY button again on the remote control
or touch ON/STAND-BY pad on the speaker.
The STAND-BY indicator turns orange.
or touch ON/STAND-BY pad on the speaker.
The STAND-BY indicator turns orange.
■
Display brightness control
Press the DIMMER/SENS ON/OFF button to adjust the
brightness of the display and sound mode indicator.
brightness of the display and sound mode indicator.
■
Volume auto fade-in
If you turn off and on the speaker with the volume set to 40 or
higher, the volume starts at 20 and fades in to the last set level.
higher, the volume starts at 20 and fades in to the last set level.
■
Volume control
Remote control operation:
Press the VOLUME + button to increase the volume and the
VOLUME – button to decrease the volume.
VOLUME – button to decrease the volume.
■
Preset sound mode
Speaker operation:
Touch a desired sound mode on the speaker.
Remote control operation:
Press a desired sound mode on the remote control.
Sound mode indicator and display bright.
Display will off after 5 seconds without any button/pad
operation.
Display will off after 5 seconds without any button/pad
operation.
Sound mode indicator and display dim.
Display will off after 5 seconds without any button/pad
operation.
Display will off after 5 seconds without any button/pad
operation.
SOUND BAR SYSTEM HT-SB400
SOUND BAR SYSTEM HT-SB400
VOL
VOL
STANDARD
STANDARD
SPORT
SPORT
NEWS
NEWS CINEMA/GAME
CINEMA/GAME
FUNCTION
FUNCTION
ON/STAND-BY
ON/STAND-BY
VOL
VOL
VOL
VOL
VOL
VOL
Speaker operation:
Touch VOL + pad to increase the
volume and touch – VOL pad to
decrease the volume.
volume and touch – VOL pad to
decrease the volume.
■
Muting
The volume is muted temporarily when pressing
the MUTE button on the remote control. Press
again to restore the volume.
the MUTE button on the remote control. Press
again to restore the volume.
NEWS
TruSurround HD on for news
CINEMA/GAME
TruSurround HD on for cinema/game
sound effect
sound effect
SPORT
TruSurround HD on for sport broadcasting
STANDARD
TruSurround HD on for standard sound
effect
effect
00 01 02 ..... 59 60
16
HT-SB400
2009 August 7
HT-SB400_A6_EN_1-17.fm
Basic Operation
General control (continued)
■
Subwoofer level control
Note:
When sound from the speaker is distorted, decrease the
subwoofer level.
subwoofer level.
■
Centre speaker level control
■
Bass control
■
Treble control
■
Touch Sensing Off mode
■
Function
Note:
The backup function will protect the memorised function mode
for a few hours should there be a power failure or the AC power
lead becomes disconnected.
for a few hours should there be a power failure or the AC power
lead becomes disconnected.
Auto power on function:
When you press the LINE button on the remote control, the
speaker will turn on at last function.
speaker will turn on at last function.
Auto power off and auto detect signal:
The speaker will automatically power off after 1 minute of
inactivity. The STAND-BY indicator turns orange. At this point, it
will automatically power ON if it detects audio signal from
connected equipment.
inactivity. The STAND-BY indicator turns orange. At this point, it
will automatically power ON if it detects audio signal from
connected equipment.
Note:
Make sure to turn off any source/signal input to speaker before
going to stand-by mode because it will cause the speaker to
power ON again.
going to stand-by mode because it will cause the speaker to
power ON again.
The subwoofer level can be adjusted.
To increase
the level, press the
SUBWOOFER LEVEL
button.
To decrease
the level, press the
SUBWOOFER LEVEL
button.
The centre speaker level can be adjusted.
To increase
the level, press the
CENTER SPK LEVEL
button.
To decrease
the level, press the
CENTER SPK LEVEL
button.
1. Press the BASS/TREBLE button
to select “BASS”.
2. Within 5 seconds, press the
VOLUME (+ or –) button to adjust
the bass.
the bass.
1. Press the BASS/TREBLE button
to select “TREBLE”.
2. Within 5 seconds, press the
VOLUME (+ or –) button to adjust
the treble.
the treble.
-5 -4 ... +4 +5
-5 -4 ... +4 +5
-5 +5
-5 +5
During Stand-by mode, press the DIMMER/SENS ON/OFF
button on the remote control and the STAND-BY indicator will
turn from orange to red.
To turn the power on, press the ON/STAND-BY button on the
remote control or touch the ON/STAND-BY pad on the display
panel.
button on the remote control and the STAND-BY indicator will
turn from orange to red.
To turn the power on, press the ON/STAND-BY button on the
remote control or touch the ON/STAND-BY pad on the display
panel.
When the FUNCTION pad on
speaker is touched or LINE 1 - 2
button on the remote control is
pressed, the input source will
change. Touch the FUNCTION pad
on speaker or LINE button on the
remote control repeatedly to select
desired input source.
speaker is touched or LINE 1 - 2
button on the remote control is
pressed, the input source will
change. Touch the FUNCTION pad
on speaker or LINE button on the
remote control repeatedly to select
desired input source.
LINE 1
LINE 2
Click on the first or last page to see other HT-SB400H (serv.man2) service manuals if exist.