Sharp DK-UH2BK User Manual / Operation Manual ▷ View online
21
DK-UH2
DK-UH2(BK)
References
Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet or on
the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on until normal playback is possible (about 1 hour).
Wipe off any condensation on the transmitter with a soft cloth before
operating the unit.
humid environment may cause condensation inside the cabinet or on
the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on until normal playback is possible (about 1 hour).
Wipe off any condensation on the transmitter with a soft cloth before
operating the unit.
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1
1
Set the unit to the power stand-by mode and turn the power on
again.
again.
2
If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
If neither operation above restores the unit, clear all the memory by
resetting it.
Factory reset, clearing all memory
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
mode.
2
Whilst pressing down the E SOUND/DEMO button and the ON/
STAND-BY button, press the button until “CLEAR ALL”
appears.
STAND-BY button, press the button until “CLEAR ALL”
appears.
Caution:
This operation will erase all data stored in memory including clock
and timer settings.
This operation will erase all data stored in memory including clock
and timer settings.
Before transporting the unit
Remove the USB from the unit. Then, set the unit to the power stand-
by mode. Carrying the unit with USB plugged in might damage both
the unit and the USB.
by mode. Carrying the unit with USB plugged in might damage both
the unit and the USB.
Maintenance
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth, dampened with a
diluted soap solution, then with a dry cloth.
diluted soap solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunctions.
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunctions.
22
DK-UH2
DK-UH2(BK)
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
(*) This power consumption value is obtained when the
demonstration mode is cancelled in the power stand-by mode.
Refer to page 8 to cancel the demonstration mode.
Refer to page 8 to cancel the demonstration mode.
USB
Power source
DC IN 6V
2A: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
Power
consumption
consumption
Power on : 5 W
Power stand-by: 0.3 W (*)
Power stand-by: 0.3 W (*)
Output power
RMS: 3.8 W (1.9 W + 1.9 W) (10% T.H.D)
Speaker
1-way type speaker system
Speakers: 5 cm (2") - 6 ohms - Full Range
Speakers: 5 cm (2") - 6 ohms - Full Range
Speaker maximum
input power
input power
3.8 W/Channel
Speaker rated
input power
input power
1.9 W/Channel
Input terminals
Auxiliary (audio signal):
500 mV/47 k ohms
500 mV/47 k ohms
Dimensions
Width: 380 mm (15")
Height: 157 mm (6-2/5")
Depth: 221 mm (8-7/10")
Height: 157 mm (6-2/5")
Depth: 221 mm (8-7/10")
Weight
1.2 kg (2.65 lbs)
USB host interface
Complies with USB 1.1/2.0 (Full Speed)
Mass-Storage-Class.
Support Bulk only and CBI protocol.
Mass-Storage-Class.
Support Bulk only and CBI protocol.
Support File
MPEG 1 Layer 3
WMA (Non DRM)
WMA (Non DRM)
Bitrate support
MP3 (32 - 320 kbps)
WMA (64 - 192 kbps)
WMA (64 - 192 kbps)
Other
Maximum total number of MP3/WMA files is
40 000.
Maximum total number of folders is 200
INCLUSIVE of root directory. (Folders which
have non playable files also counted.)
The ID3TAG information supported are
TITLE, ARTIST and ALBUM only.
Support ID3TAG version 1 and version 2.
40 000.
Maximum total number of folders is 200
INCLUSIVE of root directory. (Folders which
have non playable files also counted.)
The ID3TAG information supported are
TITLE, ARTIST and ALBUM only.
Support ID3TAG version 1 and version 2.
File system
support
support
Support USB devices with Microsoft
Windows/DOS/FAT 12/FAT 16/FAT 32.
2 kbyte block length for sector.
Windows/DOS/FAT 12/FAT 16/FAT 32.
2 kbyte block length for sector.
MEMO
03/12/17
TINSEA208AWZZ
07H R KI 1
07H R KI 1