Sharp DK-UH2BK User Manual / Operation Manual ▷ View online
17
DK-UH2
DK-UH2(BK)
USB Memory Playback
Programmed play
You can choose up to 20 selections for playback in the order you like.
To start programmed play:
Adding tracks to the programme:
To clear the programmed selections:
To cancel the programmed play mode:
Notes:
Programme selection only can be set at USB playback.
After end of last programme song playback, it will go to normal
stop mode.
If you press the ON/STAND-BY button to enter the power
stand-by mode or change the function from USB to AUX, the
programmed selection will be cleared.
During the programme operation, random play is not possible.
During the programme operation, MEMORY button is invalid.
After end of last programme song playback, it will go to normal
stop mode.
If you press the ON/STAND-BY button to enter the power
stand-by mode or change the function from USB to AUX, the
programmed selection will be cleared.
During the programme operation, random play is not possible.
During the programme operation, MEMORY button is invalid.
1
Whilst in the stop mode, press the
or
button to
select the desired track.
2
Press the / button to start playback.
3
Press the MEMORY button on remote control to save the
track number.
track number.
4
Repeat steps 1 - 3 for other tracks. Up to 20 tracks can be
programmed.
programmed.
1 Whilst in the stop mode, press the MEMORY button.
2 Within 5 seconds, press the / button.
2 Within 5 seconds, press the / button.
Follow steps 1 - 4 to add tracks. The new tracks will be stored
after the last track of the original programme. A track cannot be
added in, if unit is in programmed play mode.
after the last track of the original programme. A track cannot be
added in, if unit is in programmed play mode.
Track programmed indicator
1 Whilst in the stop mode, press the
or
button to select the
track that you want to clear.
2 Press the / button.
3 Press the MEMORY button. Track programmed indicator will
disappear.
1. At normal stop mode, hold down the MEMORY button for 2
seconds. Display will show as below:
2. Press the MEMORY button again to confirm.
3. If you want to cancel this operation, press the STOP button.
3. If you want to cancel this operation, press the STOP button.
Changing folder on/off mode by FOLDER button.
Changing the folder selection at folder mode by or button.
When the USB device is unplugged, the memory is
automatically cancelled.
Track programmed indicator
18
DK-UH2
DK-UH2(BK)
Advanced Features
Timer and sleep operation
Timer
The unit turns on and plays back USB at a preset time for 30 minutes.
Before setting the alarm:
Setting the timer content
Checking the timer setting in the timer stand-by mode:
Cancelling the timer setting in the timer stand-by mode:
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse
the same setting, peform the following operations.
The timer setting will be memorised once it is entered. To reuse
the same setting, peform the following operations.
Notes:
During timer stand-by mode, the display indicator goes off. Press
the CLOCK button, the display indicator will lights up for 10
seconds.
During timer stand-by mode, if the TIMER button is pressed
for checking or cancelling the timer setting, the display indicator
light up.
the CLOCK button, the display indicator will lights up for 10
seconds.
During timer stand-by mode, if the TIMER button is pressed
for checking or cancelling the timer setting, the display indicator
light up.
1 Check that the clock is set to the correct time (refer page 11).
If it is not set, you cannot use the timer function.
2 Plug-in USB memory device to the unit (refer page 14).
1
Press the TIMER button.
2
Press the
or
button to adjust the hour.
Press the TIMER button.
3
Press the
or
button to adjust the minute.
Press the TIMER button.
4
Press the
or
button or VOL (+ or –) to select volume.
Press the TIMER button. “
” will appears on display.
5
Press the ON/STAND-BY button to enter the timer stand-by
mode.
The “TIMER” red indicator lights up and the unit is ready for
timer playback.
mode.
The “TIMER” red indicator lights up and the unit is ready for
timer playback.
6
When the preset time is reached, the system will power on
and playback automatically.
The volume will increase gradually until it reaches the preset
volume.
and playback automatically.
The volume will increase gradually until it reaches the preset
volume.
7
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
The timer will operate at the same time every day. It will
continue until the timer setting is cancelled. Cancel the timer
when it is not in use.
the power stand-by mode automatically.
The timer will operate at the same time every day. It will
continue until the timer setting is cancelled. Cancel the timer
when it is not in use.
MUSIC SYSTEM
DK-UH2
TIMER
E
SOUND
SNO
OZE/D
IM
MER
ON
/S
TA
ND
-B
Y
VO
L
-
VO
L
+
CLO
CK
E S
OU
ND
/D
EM
O
4
4
7
6
TIMER
1
Press the TIMER button.
2
Within 10 seconds, press the
or
button to select “CALL”
and press the TIMER button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
The unit returns to the timer stand-by mode after displaying the
settings in order.
1
Press the TIMER button.
2
Within 10 seconds, press the
or
button to select “OFF”
and press the TIMER button.
Timer will be cancelled (the setting will not be cancelled).
Timer will be cancelled (the setting will not be cancelled).
1
Press and hold the TIMER button for more than 2 seconds.
2
Press the ON/STAND-BY button to enter the power stand-by
mode.
mode.
19
DK-UH2
DK-UH2(BK)
Advanced Features
Snooze function
Once timer has started, pressing the SNOOZE/DIMMER button will
stop timer for 5 minutes.
Within this period, the “TIMER” indicator will be blinking.
Once the snooze time has expired, timer will continue.
stop timer for 5 minutes.
Within this period, the “TIMER” indicator will be blinking.
Once the snooze time has expired, timer will continue.
To turn off the snooze function
During snooze mode, press and hold the SNOOZE/DIMMER button
for 2 seconds. to turn it off.
The “TIMER” indicator will stop blinking.
for 2 seconds. to turn it off.
The “TIMER” indicator will stop blinking.
Sleep operation
The USB can be turned off automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLP” is indicated.
To cancel the sleep operation without setting the unit to the power
stand-by mode, proceed as follows.
Press the ON/STAND-BY button whilst “SLP” is indicated.
To cancel the sleep operation without setting the unit to the power
stand-by mode, proceed as follows.
To use sleep and timer operation together
Sleep and timer:
1
Playback the USB.
2
Press the SLEEP button repeatedly on remote control to
select sleep time.
select sleep time.
3
Press the MEMORY button.
“SLP” will appear.
4
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep
operation finishes.
operation finishes.
1
Whilst “SLP” is indicated, pressing the SLEEP button will display
“SLEEP XXX”.
“XXX” is remaining sleep time.
The remaining sleep time is displayed for about 5 seconds.
“SLEEP XXX”.
“XXX” is remaining sleep time.
The remaining sleep time is displayed for about 5 seconds.
You can change the remaining sleep time whilst it is displayed by
pressing the SLEEP button (steps 2 - 3).
1
Whilst “SLP” is indicated, press the SLEEP button repeatedly to
select “SLEEP OFF”, and press the MEMORY button.
select “SLEEP OFF”, and press the MEMORY button.
1
Set the sleep time (see left, steps 1 - 4).
2
Whilst the sleep timer is set, set the timer (steps 1 - 6, page 18).
Sleep timer setting
Timer setting
Sleep operation will
automatically stop
automatically stop
Timer start time
End time
10 minutes - 2 hours
30 minutes
20
DK-UH2
DK-UH2(BK)
Advanced Features
Enhancing your system
The audio cable is not included. Purchase a seperate audio cable as
shown below.
shown below.
Listening to the audio/video sounds from
portable audio player, computer, etc.
portable audio player, computer, etc.
Notes:
When AUX cable is plugged in, the unit will enter the AUX
function automatically.
To prevent noise interference, place the unit away from the
television.
function automatically.
To prevent noise interference, place the unit away from the
television.
Troubleshooting chart
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
General
Remote control
USB
1
Use an Audio cable to connect the portable audio player,
computer etc. to the AUX IN socket.
computer etc. to the AUX IN socket.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the FUNCTION button to select AUX.
4
Play the connected equipment.
If volume level of the connected device is too high, sound
distortion may occur. Should this happen, lower the volume of
the connected device.
distortion may occur. Should this happen, lower the volume of
the connected device.
AUX IN
DC IN 6V
Computer
Portable audio
player
To the line output socket
N
I
X
U
A
Audio cable
(not supplied)
Symptom
Possible cause
The clock is not set
to the correct time.
to the correct time.
Is the Summer Time set to the correct
setting? (Refer to page 11)
Did a power failure occur? Reset the
clock. (Refer to page 21)
setting? (Refer to page 11)
Did a power failure occur? Reset the
clock. (Refer to page 21)
When a button is
pressed, the unit
does not respond.
pressed, the unit
does not respond.
Set the unit to the power stand-by mode
and then turn it back on.
and then turn it back on.
No sound is heard.
Is the volume level set to “0”?
Symptom
Possible cause
The remote control
does not operate.
does not operate.
Is the AC power lead of the unit plugged
in?
Is the battery polarity correct?
Is the battery dead?
Is the distance or angle incorrect?
Is there a strong light shining on the
remote sensor?
in?
Is the battery polarity correct?
Is the battery dead?
Is the distance or angle incorrect?
Is there a strong light shining on the
remote sensor?
Symptom
Possible cause
Device cannot be
detected.
detected.
Is there any MP3/WMA file available?
Is the device properly connected?
Is it MTP device?
Does the device contain AAC files only?
Is the device properly connected?
Is it MTP device?
Does the device contain AAC files only?
Playback does not
start.
start.
Is it a copyright protected WMA file?
Is it a false MP3 file?
Is it a false MP3 file?
Wrong time dis-
play.
Wrong file name
display.
play.
Wrong file name
display.
Is Variable Bitrate file being played
back?
Is the File Name written in Chinese or
Japanese characters?
back?
Is the File Name written in Chinese or
Japanese characters?
Unit always powers
on at AUX function.
on at AUX function.
Is the AUX cable is plugged in?
Click on the first or last page to see other DK-UH2BK service manuals if exist.