DOWNLOAD Sharp DK-UH2BK Service Manual ↓ Size: 2.51 MB | Pages: 24 in PDF or view online for FREE

Model
DK-UH2BK
Pages
24
Size
2.51 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio / Portable
File
dk-uh2bk.pdf
Date

Sharp DK-UH2BK User Manual / Operation Manual ▷ View online

 
9
 
DK-UH2
DK-UH2(BK)
 
Preparation for Use
 
Remote control
 
 
Battery installation
 
Precautions for battery use:
  
Remove the battery if the unit will not be used for long periods of time.
This will prevent potential damage due to battery leakage.
 
Caution:
  
Do not use rechargeable battery (nickel-cadmium battery, etc.).
  
Replace only with the same or equivalent type.
  
Installing the battery incorrectly may cause the unit to malfunction.
  
Danger of explosion if battery is incorrectly replaced.
  
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
 
Notes concerning use:
  
Replace the battery if the operating distance is reduced or if the
operation becomes erratic. Purchase “CR 2025”, coin lithium
battery. 
  
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
  
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
  
Keep the remote control away from moisture, heat, shock, and
vibrations. 
 
 
Test of the remote control
Check the remote control after checking all the connections (see
pages 8 - 9).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy the music.
1
Whilst pushing the locking tab towards the centre of the remote
control, slide out the battery holder.
2
Remove the old battery from the battery holder, insert the new
battery and then slide the battery holder back into the remote
control.
Back of remote control
Locking tab
Locking tab
Positive (+)
 side up
Battery holder
Battery type
Polarity (+) symbol
MUSIC SYSTEM 
DK-UH2
SN
OO
ZE
/D
IM
ME
R
ON
/S
TA
ND
-B
Y
VO
L
-
VO
L
+
CL
OC
K
SO
UN
D/
DE
MO
4
4
7
6
FUNCTION
CLOCK
SLEEP
TIMER
SNOOZE/
DIMMER
VOL
MEMORY
DISPLAY
PLAY
MODE
E SOUND
/DEMO
FOLDER
Remote sensor
10
DK-UH2
DK-UH2(BK)
Basic Operation
General control
To turn the power on
Press the ON/STAND-BY button to turn the power on. The POWER
indicator lights up.
Illumination light control
When the power is turned on, POWER and DISPLAY indicators light 
up. To turn on/off the light, hold down the SNOOZE/DIMMER button 
on the main unit or remote control for more than 2 seconds.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or higher,
the volume starts at 16 and fades in to the last set level.
Volume control
Main unit and Remote control operation:
Press the VOL (+ or -) button to increase or decrease the volume.
E SOUND control
When the E SOUND/DEMO button is pressed, the unit will enter the
E SOUND mode, and E SOUND indicator lights up. This mode adjust
low bass and high frequency automatically according to volume
input. To cancel this mode, press the E SOUND/DEMO button again.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
The display indicator lights up, and the POWER indicator goes off. 
MUSIC SYSTEM 
DK-UH2
SNOOZE/DIMME
R
ON
/S
TA
ND
-B
Y
VO
L
-
VO
L
+
CL
OC
K
SO
UN
D/
DE
MO
4
4
7
6
POWER
Indicator
E Sound
Indicator
Display
Indicator
0...30    MAXIMUM
11
DK-UH2
DK-UH2(BK)
Basic Operation
Setting the clock 
In this example, the clock is set for the 24-hour (0:00) display.
To confirm the time display:
[When the unit is in the power stand-by mode]
Press the CLOCK button. The time display will appear for about 10
seconds.
[When the power is on]
Press DISPLAY button on the remote control to toggle between the
function information and clock display.
Press the CLOCK button. The time display will appear for about 10
seconds.
Notes:
The clock will continue counting for 8 hours should there be a
power failure or the AC power lead becomes disconnected.
The “CLOCK ADJ” will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform “Setting the clock” from step 1 to step 4.
To change the 24-hour or 12-hour display:
Summer time:
1
Press and hold down the CLOCK button on the main unit or
remote control for more than 2 seconds.
2
Press the  
 or 
  button to select 24-hour or 12-hour
display and then press the CLOCK button.
The 24-hour display will appear.
 
(0:00 - 23:59)
The 12-hour display will appear.
 
(12:00 AM- 11:59 PM)
3
Press the 
 or 
  button to adjust the hour and then
press the CLOCK button.
Press the 
 or 
 button once to advance the time by 1 hour.
Hold it down to advance continuously.
FUNCTION
CLOCK
SLEEP
TIMER
SNOOZE/
DIMMER
VOL
MEMORY
DISPLAY
PLAY
MODE
E SOUND
/DEMO
FOLDER
CLOCK
MUSIC SYSTEM 
DK-UH2
SN
OO
ZE
/D
IM
ME
R
ON/S
TAND-BY
VO
L
-
VO
L
+
CL
OC
K
E S
OU
ND
/D
EM
O
4
4
7
6
4
Press the 
 or 
 button to adjust the minutes and then
press the CLOCK button.
Press the 
 or 
 button once to advance the time by
1 minute. Hold it down to change the time in 5-minutes interval.
1
Clear all the programmed contents. [Refer to “Factory reset,
clearing all memory” on page 21 for details.]
2
Perform “Setting the clock” from step 1.
1
Press  the  
  button  at  remote  control  to advance  the  time
1  hour. 
  indicator  will appear on display.
2
Press the 
 button again to turn the clock back 1 hour.
“0:00”  
“12:00”
12
DK-UH2
DK-UH2(BK)
USB Memory Playback
Listening to USB mass storage device/MP3 player 
To playback MP3/WMA (Windows Media Audio) 
file
There are many music sites on the internet that you can download
MP3/WMA (Windows Media Audio) music files from. Follow the
instructions from the website on how to download the music files.
You can then playback these downloaded music files by saving them
to a USB mass storage device or MP3 player.
Your downloaded song/files are for personal use only. Any other
usage of the song without owner’s permission, is against the law.  
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3. 
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
During VBR file playback, time counter in the display may differ
from its actual playback time.
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for
Windows Media Player.   
“MP3” and “WMA” indicator will light up after the unit reads
information on an MP3 or WMA disc.
Bitrate which is supported by WMA is 64 ~ 192 kbps.
Auto power on function:
When you press any of the following buttons, the unit turns on.
 /   button (main unit and remote control): The unit turns on and
USB playback starts regardless of last function.
FUNCTION button (remote control): The unit turns on at last
function (USB, AUX).
Note:
This product is not compatible with MTP and AAC file systems.
MUSIC SYSTEM 
DK-UH2
SN
OO
ZE
/D
IM
M
ER
ON/S
TAND-BY
VOL
-
VOL
+
CL
OC
K
SO
UN
D/
DE
MO
4
4
7
6
FUNCTION
CLOCK
SLEEP
TIMER
SNOOZE/
DIMMER
VOL
MEMORY
DISPLAY
PLAY
MODE
E SOUND
/DEMO
FOLDER
FUNCTION
Page of 24
Display

Click on the first or last page to see other DK-UH2BK service manuals if exist.