DOWNLOAD Sharp CD-MPX100E Service Manual ↓ Size: 2.52 MB | Pages: 36 in PDF or view online for FREE

Model
CD-MPX100E
Pages
36
Size
2.52 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio / System
File
cd-mpx100e.pdf
Date

Sharp CD-MPX100E User Manual / Operation Manual ▷ View online

10/3/05
MPX100EE_1.fm
25
TINSEA093AWZZ
CD-MPX100E
Tape Recording
Recording from a CD or MP3/WMA disc
You can record 3 discs continuously.
To perform programmed recording:
To stop recording:
Press the   button.
The disc and tape will stop.
Note:
l Whilst recording, OPEN/CLOSE   button is deactivated. It is rec-
ommended to perform disc recording after closing the disc tray.
MINI COMPONENT SYSTEM CD-MPX100W
DISPLAY
1
Press the ON/STAND-BY button to turn the power on.
2
Load a cassette into the TAPE 2 cassette compartment with
the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be 
performed.
3
Press the CD button and load the desired disc.
4
Press one of the   1 -   3 buttons on the remote control to
select the disc to be recorded first.
5
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
6
Press the   /   button to start recording.
l Disc playback will start approximately 7 seconds after the 
tape starts.
l Recording is started from the selected disc. When the play-
back of the last disc is finished or the end of the tape is 
reached, the disc and the cassette will stop automatically.
1
Programme discs and tracks. (See page 20.)
2
Press the REC PAUSE (TAPE-2 
) button.
3
Press the   /   button.
10/3/05
MPX100EE_1.fm
26
TINSEA093AWZZ
CD-MPX100E
Tape Recording
Recording on a cassette tape (continued)
Recording from the radio
To interrupt recording:
Press the REC PAUSE (TAPE-2 
) button.
To resume recording, press the   /   button.
To stop recording:
Press the   button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
To stop dubbing:
Press the   button.
TAPE 1 and TAPE 2 will simultaneously stop.
 
Erasing recorded tapes
Note:
Make sure that the TAPE 1 is not in use.
1
Tune in to the desired station. (See page 21.)
2
Load a cassette into the TAPE 2 cassette compartment with
the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be 
performed.
3
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
4
Press the   /   button to start recording.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette
into the TAPE 1 cassette com-
partment. Insert a blank tape into
the TAPE 2 cassette compart-
ment. 
It is recommended that the recording tape is the same length as 
the master tape.
3
Press the TAPE (1   2) button until "TAPE 1" appears on
the display.
4
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
5
Press the   /   button to start dubbing.
1
Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing towards you.
2
Press the TAPE (1   2) button until "TAPE 2" appears on the 
display.
3
Press the REC PAUSE (TAPE-2 
) button.
4
Press the   /   button to start erasing.
10/3/05
MPX100EE_1.fm
27
TINSEA093AWZZ
CD-MPX100E
Advanced F
eatu
res
Timer and sleep operation
Timer playback:
The unit turns on and plays the desired source (CD, TUNER, TAPE)
at the preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio programme, and
use the daily timer as an alarm clock.
Note:
When the setting times for the daily timer and once timer overlap, the
once timer takes priority. Allow an interval of at least 1 minute between
operations.
Timer playback or timer recording
Before setting timer:
Continued to the next page
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer: Once timer play and once timer recording works for 
one time only at a preset time.
For example, if you are away but want to record a programme on a  
radio station.
Daily timer: Daily timer play and daily timer recording works at 
the same preset time everyday.
For example, set the timer as a wake up call every morning.
1
Set the daily timer (pages 27 - 29).
2
Set the once timer (pages 27 - 29).
Start
Daily timer
Once timer
1 minute or more
Stop
Start
Stop
1
Check that the clock is set to the correct time (refer to page 14). 
If it is not set, you cannot use the timer function.
2
For timer playback:   Load a cassette or discs to be played.
For timer recording:   Load a cassette for recording in the 
cassette compartment.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the 
 
 or 
 
 button to 
select "ONCE" or "DAILY", and press the MEMORY/
SET (MEMORY) button.
Set the unit to the correct time if "ONCE" and "DAILY" does not 
appear.
MINI COMPONENT SYSTEM CD-MPX100W
DISPLAY
10/3/05
MPX100EE_1.fm
28
TINSEA093AWZZ
CD-MPX100E
Advanced F
eatu
res
Timer and sleep operation (continued)
4
Within 10 seconds, press the 
 
 or 
 
 button to 
select "ONCE SET" or "DAILY SET", and press the 
MEMORY/SET (MEMORY) button.
5
Press the 
 
 or 
 
 button to select "PLAY" or
"REC", and press the MEMORY/SET (MEMORY) button.
The illustrations show the daily timer setting.
6
Press the 
 
 or 
 
 button to adjust the hour and
then press the MEMORY/SET (MEMORY) button.
The illustrations show the timer playback setting in the daily 
timer mode.
7
Press the 
 
 or 
 
 button to adjust the minutes and
then press the MEMORY/SET (MEMORY) button.
8
Set the time to finish as in step 6 and 7 above.
White
Red
9
Switch input with the 
 
 or 
 
 button, and then
press the MEMORY/SET (MEMORY) button.
To select the timer playback source: CD, TUNER, TAPE 1 or 
TAPE 2.
To select the timer recording source: TUNER.
l When you select the tuner, select a station by pressing the 
  
or  
 button, and then press the MEMORY/SET 
(MEMORY) button.
l If a station has not been programmed, "NO P.SET" will be 
displayed and timer setting will be cancelled.
10
Adjust the volume using the VOLUME control, and then
press the MEMORY/SET (MEMORY) button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer 
playback or timer recording.
MINI COMPONENT SYSTEM CD-MPX100W
DISPLAY
Page of 36
Display

Click on the first or last page to see other CD-MPX100E service manuals if exist.