Sharp CD-MPX100E User Manual / Operation Manual ▷ View online
10/3/05
MPX100EE_1.fm
21
TINSEA093AWZZ
CD-MPX100E
Radio
Listening to the radio
Auto power on function:
When you press any of the following buttons, the unit turns on.
l TUNER (BAND) button (main unit and remote control): The unit
turns on the "TUNER" function is activated.
l
/ button (main unit and remote control): The unit turns on and
playback of the last function starts (CD, TAPE, TUNER, VIDEO/
AUX).
AUX).
n Tuning
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
l " " will appear when an FM broadcast is in stereo.
l If the FM reception is weak, press the TUNER (BAND) button to
Press the TUNER (BAND) button to display the "ST" indicator.
l " " will appear when an FM broadcast is in stereo.
l If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
and the sound becomes clearer.
MINI COMPONENT SYSTEM CD-MPX100W
DISPLAY
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
desired frequency band (FM or AM).
3
Press the TUNING ( or ) button to tune in to the desired
station.
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
l When radio interference occurs, auto scan tuning may stop au-
tomatically at that point.
l Auto scan tuning will skip weak signal stations.
l To stop the auto tuning, press the TUNING button again.
l To stop the auto tuning, press the TUNING button again.
FM stereo mode indicator
FM stereo receiving indicator
10/3/05
MPX100EE_1.fm
22
TINSEA093AWZZ
CD-MPX100E
Radio
Listening to the radio
(continued)
n Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
the push of a button. (Preset tuning)
Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead become discon-
nected.
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead become discon-
nected.
n To recall a memorised station
Press the PRESET ( or ) button for less than 0.5 seconds to se-
lect the desired station.
lect the desired station.
n To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset
memory scan)
memory scan)
n To erase entire preset memory
1
Perform steps 1 - 3 in "Tuning" on page 21.
2
Press the MEMORY/SET (MEMORY) button to enter the
preset tuning saving mode.
preset tuning saving mode.
3
Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 30 seconds, press the MEMORY/SET (MEMORY)
button to store that station in memory.
button to store that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
set station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
memorised for that preset channel number will be erased.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the desired sta-
tion is located.
tion is located.
1
Press the ON/STAND-BY button to enter the stand-by mode.
2
Whilst pressing down the REC PAUSE button and the X-BASS/
DEMO button, press the TUNER button until "TUNER CL" ap-
pears.
DEMO button, press the TUNER button until "TUNER CL" ap-
pears.
DISPLAY
10/3/05
MPX100EE_1.fm
23
TINSEA093AWZZ
CD-MPX100E
Tape Playback
Listening to a cassette tape (TAPE 1 or TAPE 2)
Auto power on function:
When you press any of the following buttons, the unit turns on.
l TAPE (1 2) button (main unit and remote control): The unit turns
When you press any of the following buttons, the unit turns on.
l TAPE (1 2) button (main unit and remote control): The unit turns
on and the "TAPE" function is activated.
l
/ button (main unit and remote control): The unit turns on and
playback of the last function starts (CD, TAPE, TUNER, VIDEO/
AUX).
AUX).
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
In the stop mode of tape operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
Before playback:
l For playback, use normal or low-noise tapes for
l For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not
recommended.)
recommended.)
l Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
l Before loading a tape into the cassette compart-
ment, tighten the slack with a pen or a pencil.
MINI COMPONENT SYSTEM CD-MPX100W
DISPLAY
n Tape 1 playback
1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette com-
partment by pushing
the area marked " ".
partment by pushing
the area marked " ".
3
Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment
with the side to be
played facing towards
you.
TAPE 1 compartment or
TAPE 2 compartment
with the side to be
played facing towards
you.
4
Press the TAPE (1 2) button to select the cassette you
want to listen to.
want to listen to.
5
Press the / to start
playback.
playback.
TAPE 1
TAPE 2
Tape play indicator
10/3/05
MPX100EE_1.fm
24
TINSEA093AWZZ
CD-MPX100E
Tape Recording
Listening to a cassette tape
(TAPE 1 or TAPE 2)
(TAPE 1 or TAPE 2)
(continued)
n
Various tape functions
Caution:
l To remove the cassette, press the button, and then open the
l To remove the cassette, press the button, and then open the
compartment.
l Before changing from one tape operation to another, press the
button.
l If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not open.
In this case, wait until the power is restored.
In this case, wait until the power is restored.
Recording on a cassette tape
Before recording:
l When recording important selections, make a preliminary test to
l When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
l SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
l The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
l For recording, use only normal tapes. Do not use metal or
CrO tapes.
l Recording can be operated in the TAPE 2 compartment only. The
TAPE 1 compartment is for playback only.
Function
Main Unit
Remote
Control
Operation
Playback
Press in the stop mode.
Stop
Press in the playback
mode.
Fast
forward/
Rewind
(TAPE 2
only)
forward/
Rewind
(TAPE 2
only)
Press in the playback or
stop mode.
Erase-prevention tab of cassette tapes:
l When recording on a cassette tape,
l When recording on a cassette tape,
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent accidental
recording or erasing.
tabs are not removed. Cassettes have
removable tabs that prevent accidental
recording or erasing.
l To protect the recorded sound, remove
the tab after recording. Cover the tab
hole with adhesive tape to record on the
tape without the tab.
hole with adhesive tape to record on the
tape without the tab.
Side A
Tab for
side B
side B
Tab for
side A
side A
Click on the first or last page to see other CD-MPX100E service manuals if exist.