Sharp CD-ES222E User Manual / Operation Manual ▷ View online
9
CD-ES222E
03/10/29
CD-ES222E(UK).fm
TINSEA002SJZZ
Pre
paration
for Use
Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
the plus (+) terminal.
Caution:
Note:
The speaker grilles are not removable.
The speaker grilles are not removable.
Connecting the AC power lead
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
Notes:
z
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
be in use for a prolonged period of time.
z
Never use a power lead other than the one supplied. Otherwise, a
malfunction or an accident may occur.
malfunction or an accident may occur.
Demonstration mode
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode),
press the X-BASS/DEMO button. The demonstration mode will be
cancelled and the display will disappear.
When the unit is in the power stand-by mode (demonstration mode),
press the X-BASS/DEMO button. The demonstration mode will be
cancelled and the display will disappear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
To turn the power on
Press the ON/STAND-BY button to turn the power on.
z
Use speakers with an impedance of 8 ohms or
more, as lower impedance speakers can
damage the unit.
more, as lower impedance speakers can
damage the unit.
z
Do not mistake the right and the left channels.
The right speaker is the one on the right side
when you face the unit.
The right speaker is the one on the right side
when you face the unit.
z
Do not let the bare speaker wires touch
each other.
each other.
z
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
placed in the bass reflex ducts.
z
Do not stand or sit on the speakers. You may
be injured.
be injured.
Incorrect
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
unit will enter the demonstration mode.
You will see words scroll.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
mode.
2
CD-ES222E(UK) TINSEA002SJZZ
2
10
CD-ES222E
03/10/29
CD-ES222E(UK).fm
TINSEA002SJZZ
Pre
paration
for Use
Remote control
Battery installation
Precautions for battery use:
z
Replace both old batteries with new ones of the same type.
z
Do not mix old and new batteries.
z
Remove the batteries if the unit is not to be used for long periods
of time. This will prevent potential damage due to battery leakage.
of time. This will prevent potential damage due to battery leakage.
Caution:
z
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
z
Installing the batteries incorrectly may cause the unit to malfunc-
tion.
tion.
Notes concerning use:
z
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic.
operation becomes erratic.
z
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
sensor on the unit with a soft cloth.
z
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
operation. Change the lighting or the direction of the unit.
z
Keep the remote control away from moisture, heat, shock, and vi-
brations.
brations.
Test of the remote control
Check the remote control after checking all the connections (see
pages 8 - 9).
Point the remote control directly at the remote sensor on the unit.
pages 8 - 9).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now you
can enjoy some music.
Press the ON/STAND-BY button. Does the power turn on? Now you
can enjoy some music.
Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
1
Remove the battery cover.
2
Insert the batteries according to the direction indicated in
the battery compartment.
the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
3
Replace the cover.
0.2 m - 6 m
(8" - 20')
(8" - 20')
Remote sensor
11
CD-ES222E
03/10/29
CD-ES222E(UK).fm
TINSEA002SJZZ
Ba
sic Ope
ration
Sound control
Volume control
Press the VOLUME (+ or -) button to increase or decrease the vol-
ume.
ume.
Bass control
When the power is first turned on, it will enter the extra bass mode-
this emphasises the bass frequencies. "X-BASS" will appear in the
display. To cancel the extra bass mode, press the X-BASS/DEMO
(X-BASS) button, "X-BASS" will disappear from the display.
this emphasises the bass frequencies. "X-BASS" will appear in the
display. To cancel the extra bass mode, press the X-BASS/DEMO
(X-BASS) button, "X-BASS" will disappear from the display.
Equaliser
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode will be displayed. To change to a different mode, press
the EQUALIZER (EQUALIZER MODE) button repeatedly until the
desired sound mode appears.
current mode will be displayed. To change to a different mode, press
the EQUALIZER (EQUALIZER MODE) button repeatedly until the
desired sound mode appears.
1
2
29
30 (MAXIMUM)
0
.....
X-BASS indicator
FLAT
The sound is not modified.
ROCK
Bass and treble are emphasised.
POPS
Bass and treble are slightly emphasised.
JAZZ
Treble is slightly emphasised.
CLASSIC
Treble is cut a little.
VOCAL
Vocals (midrange tones) are emphasised.
3
12
CD-ES222E
03/10/29
CD-ES222E(UK).fm
TINSEA002SJZZ
Ba
sic Ope
ration
Setting the clock
In this example, the clock is set for the 24-hour (0:00) display.
To confirm the time display:
Note:
The "CLOCK" or time will flash at the push of the CLOCK button
when the AC power supply is restored after a power failure or
unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" is not flash-
ing in step 1, step 2 (for selecting the 24-hour or 12-hour display) will
be skipped.
To change the 24-hour or 12-hour display:
The "CLOCK" or time will flash at the push of the CLOCK button
when the AC power supply is restored after a power failure or
unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" is not flash-
ing in step 1, step 2 (for selecting the 24-hour or 12-hour display) will
be skipped.
To change the 24-hour or 12-hour display:
1
Press the CLOCK button and within 8 seconds, press the
MEMORY/SET button.
MEMORY/SET button.
2
Within 30 seconds, press the TUNING/TIME ( or ) button
to select 24-hour or 12-hour display and then press the
MEMORY/SET button.
to select 24-hour or 12-hour display and then press the
MEMORY/SET button.
"0:00"
The 24-hour display will appear.
(0:00
-
23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it
has been reset. [Refer to "Clearing all the memory (reset)" on
page 27 for details.]
has been reset. [Refer to "Clearing all the memory (reset)" on
page 27 for details.]
3
Within 30 seconds, press the TUNING/TIME ( or ) button
to adjust the hour and then press the MEMORY/SET button.
to adjust the hour and then press the MEMORY/SET button.
z
Press the TUNING/TIME ( or ) button once to advance
the time by 1 hour. Hold it down to advance continuously.
the time by 1 hour. Hold it down to advance continuously.
z
When the 12-hour display is selected, "AM" will change au-
tomatically to "PM".
tomatically to "PM".
4
Within 30 seconds, press the TUNING/TIME ( or ) button to
adjust the minutes and then press the MEMORY/SET button.
adjust the minutes and then press the MEMORY/SET button.
z
Press the TUNING/TIME ( or ) button once to advance
the time by 1 minute. Hold it down to advance continuously.
the time by 1 minute. Hold it down to advance continuously.
z
The hour will not advance even if minutes advance from "59"
to "00".
to "00".
Press the CLOCK button.
The time display will appear for
about 8 seconds.
The time display will appear for
about 8 seconds.
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 27 for details.]
memory (reset)" on page 27 for details.]
2
Perform "Setting the clock" from step 1.
Click on the first or last page to see other CD-ES222E service manuals if exist.